It load the first few blends... Yes, that's about it. The number of blends loaded seems to vary with system load and how long since a reboot. Every once in a while it will actually load all the blends. The blends that are not loaded (perhaps a better description would be loaded incorrectly) only contain their first frame. For example lets say it gets to "shuffle" before it messes up. Using any blend after that will generate a solid pose of the first frame. Blending this with a properly loaded blend produces a wild limp. Crashes: Takes 5 - 10 minutes to load then clicking anything causes it to just go blank. Can't be closed. Poser's task must be killed. Further most applied walks produce poses where the feet are translated about 3000 miles from the figure. (Yes they are the 3/24/2003 blends and I did delete "Don for walk designer.pwd") Every patch has made walk designer worse. This one finally completely killed it. Please just put it back the way it was in P5/Release at least it worked then. My laptop (P3/700, 384MB W2K) and Desktop (P4/1.8, 512MB W2K) both exhibit the same problems. The trouble is in the software, not the machine.