LadyB, Well, you've certainly put a lot of work into it. So it's definitely worth getting it right before you sell it. If you importing from LW at a preset size, that works OK. But obviously, you need to check your settings, since the size is too big. If you can do it that way, it's easier than messing around with the poser options. Or you can scale it down by BODY, as les says, then re-export/import the obj to give you zeroed dial values (otherwise the user will have scale dials which are not set to 100%). Judging by pic #10, your room height is about 3 times figure height, or 18 feet high. This should be a maximum of 11 or 12 feet for a large room. It looks as though you need to scale it down by at least 1/3. Sorry, but I know nothing about the setup room either. I use cr2Edit or notepad. mac PS les - I assume when you say 'internal name' you're referring to the 'poser interface name' (for want of a better term), and not the getStringRes name. At least, I hope you are. LOL.