Further to Bob's post: Note that the Full Body Morph (FBM) dials in the Body actor are NOT "morph dials" at least not in in the sense relevent to Bob's post above. The setting of other FBM dials is not recorded when you save an FBM, only the settings of morph dials in the individual body parts. Internally to the cr2 (character file) an "FBM" channel is actually a 'valueParm' channel, it is used as a master channel, and slaving code is added to individual targetGeom (morph) channels to make them respond to settings of the valueParm channel. If you are brave and prepared to do a bit of studdy you could edit the cr2 in such a way as to slave scale channels and other valueParm (FBM) channels to some particular valueParm channel, but this could be a lot of work depending on how many dials you have tweaked, and is perhaps a bit ambitious for a first venture into cr2 editing. Slaving channels to a master channel is known as ERC which means "Enhanced Remote Controle" it is also sometimes called EMC. Rob the Whiz, Nerd, and VK, are some of the foremost experts in ERC, their web sites are good places to start learning about it. Here are some URLs: http://www.rbtwhiz.com/rbtwhiz_ERC.html http://www.nerd3d.com/ http://64.38.105.73/erc_download.html