Fri, Nov 29, 8:42 AM CST

Renderosity Forums / Poser - OFFICIAL



Welcome to the Poser - OFFICIAL Forum

Forum Coordinators: RedPhantom

Poser - OFFICIAL F.A.Q (Last Updated: 2024 Nov 29 7:57 am)



Subject: Looking for a morph auto loader


Lyrra ( ) posted Tue, 31 August 2004 at 11:55 AM · edited Fri, 29 November 2024 at 8:42 AM

Well its been a while since I asked Has anyone made an auto loader for morph targets yet? I am faced again with a project that involves loading several hundred obj format morphs onto a model. What I'd like such a thing to do: Open figure. Point to folder containing morphs to load. Click ok. Have it load all the morphs and give me a list of the error problems. and yes .. I'd pay for such an application. Lyrra



ockham ( ) posted Tue, 31 August 2004 at 12:10 PM

My Loader script does this and much more. It was being sold through Synergy 3D, but I'm not sure if that site even exists any more, and it only sold 3 copies about a year ago. I'm halfway inclined to make it free.

My python page
My ShareCG freebies


steveshanks ( ) posted Tue, 31 August 2004 at 12:48 PM

Bookmarking coz i want one too ;o).......Steve


Lyrra ( ) posted Tue, 31 August 2004 at 12:54 PM

ockham more? dare I ask? And I'm presuming bcasue you say 'script' that its python based. Does it work with p5? And now that you've teased me .. where can I get it? Steve well its not like I want to load all those p4fem morphs from Trav by hand you know? wink Lyrra



ockham ( ) posted Tue, 31 August 2004 at 1:00 PM

Yes, it's Python. And it does work with P5. Okay, hell with it. Anything that earns a grand total of $32 in one year is not suddenly going to start bringing in billions. I'll make it free and put it on my website. Will notify here when it's loaded.

My python page
My ShareCG freebies


Kristta ( ) posted Tue, 31 August 2004 at 1:04 PM

bookmarked cause it sounds interesting.


Lyrra ( ) posted Tue, 31 August 2004 at 1:11 PM

yaaay! thanks ockham! my apprentice thanks you (she was looking at 100+ megs of morphs and getting that deer-in-headlights look) Lyrra



SWAMP ( ) posted Tue, 31 August 2004 at 1:12 PM

Cool!!!.....Thanks ockham.


ockham ( ) posted Tue, 31 August 2004 at 1:21 PM

Attached Link: http://ockhamsbungalow.com/Loader/loaderfree.zip

Here she is. The original had a huge PDF help file, which I've left out.... I think you'll find it fairly obvious.

My python page
My ShareCG freebies


logansfury ( ) posted Tue, 31 August 2004 at 1:38 PM

Grabbing!!! Thank you - AGAIN :) - for the generosity!!! Logan


Lyrra ( ) posted Tue, 31 August 2004 at 1:38 PM

thanks Ockham! :)



ockham ( ) posted Tue, 31 August 2004 at 1:41 PM
libernull ( ) posted Tue, 31 August 2004 at 1:54 PM

Thank you for the generous gift! :)


tpriest ( ) posted Tue, 31 August 2004 at 2:04 PM

Sounds great! Thanks Ockham!


TrekkieGrrrl ( ) posted Tue, 31 August 2004 at 2:14 PM

Ockham! You're the GREATEST! Thanks a lot!

FREEBIES! | My Gallery | My Store | My FB | Tumblr |
You just can't put the words "Poserites" and "happy" in the same sentence - didn't you know that? LaurieA
  Using Poser since 2002. Currently at Version 11.1 - Win 10.



EnglishBob ( ) posted Tue, 31 August 2004 at 3:02 PM

This is the coolest thing I've heard for ages. Three cheers for Ockham!


xantor ( ) posted Tue, 31 August 2004 at 3:22 PM

Thank you!


FyreSpiryt ( ) posted Tue, 31 August 2004 at 5:48 PM

Thank you, Ockham! You're the sweetest!


texmextortilla ( ) posted Tue, 31 August 2004 at 6:27 PM

Gracias!


Khai ( ) posted Tue, 31 August 2004 at 6:35 PM

got it :) thanks Ockham! question (not had a chance to read the readme yet) does this allow for loading a lot of OBJ's at once in general or just as morph targets? (he says as he slinks back to loading this model set up bit by bit)


ockham ( ) posted Tue, 31 August 2004 at 9:43 PM

You can load lots of OBJs. However! I didn't allow for setting the figure size choice (and those other choices like centered, on floor, etc) for an OBJ import. The models will all come in at original size. This may be OK for some situations, but it's not ideal. Try it first before you use it for serious purposes.

My python page
My ShareCG freebies


Khai ( ) posted Tue, 31 August 2004 at 9:54 PM

thats exactly what I wanted :) (I scale in tS first / test / then UVmap.. then I have a load of UVmapped OBJ's to bring in.... ) thanks again! :)


ockham ( ) posted Tue, 31 August 2004 at 10:00 PM · edited Tue, 31 August 2004 at 10:02 PM

OOps, what I said a minute ago wasn't quite right.

Loader uses the last settings of that OBJ dialog
box.

So if you want everything to come in at
(say) 10% of figure size, bring in one OBJ first,
set the dialog for 10%, then run Loader on the big
quantity of OBJs. (I thought it was just using original size because I always happen to leave the dialog set for original size.)

Message edited on: 08/31/2004 22:02

My python page
My ShareCG freebies


narcissus ( ) posted Wed, 01 September 2004 at 3:43 AM

Thanks ockham! This should be a very interesting script ! pitklad


bikermouse ( ) posted Wed, 01 September 2004 at 5:41 AM

Ockham, You are my hero! Thank you very much! Although I keep saying I'm gonna learn Python I never seem to get a round tuit. Thank you! Thank you! Thank you! - TJ


Ladyfyre-graphics ( ) posted Wed, 01 September 2004 at 5:42 AM

Ockham, I bought it from Lady Cherry's forum/store and it was the best thing and most time saving I ever bought! I use it all the time! I use loads of custom morphs andthis makes it so easy :) ....And don't forget the auto conformer that is included, that saves ages when loading up loads of clothes in complex scenes. Alla

www.ladyfyre-graphics.com

  • Poser freebies, tutorials and articles, gallery and lots of stuffage for the Poser and Daz|Studio Horses!


bikermouse ( ) posted Wed, 01 September 2004 at 7:20 AM

I tried it and even without reading the instructions, I was able to load props change lights and do some other neat things quickly! Ockham, this Loader is really neat!! again thank you very much!!! - TJ


Lyrra ( ) posted Wed, 01 September 2004 at 9:03 PM

well I loaded it and pushed the button and it said this ..so how do I fix it? where do I get the thing it said it wanted? WHOOPS! I can't find a Tcl/Tk 8.0 installation anywhere. Please make sure that Tcl.Tk 8.0 is installed and that the PATH environment variable is set to include the Tcl/bin directory (or wherever TK80.DLL and TCL80.DLL are installed). If you don't know how to fix this, consider searching the Python FAQ for the error you get; post to the comp.lang.python if all else fails. Read the source file FixTk.py for details. Traceback (innermost last): File "", line 25, in ? AttributeError: AppLocation



xantor ( ) posted Wed, 01 September 2004 at 9:19 PM

I get that error with python too, sometimes but it works okay at other times?


ockham ( ) posted Wed, 01 September 2004 at 9:24 PM

Those errors most often come from an earlier release of ProPack. First check to see if your Poser version is 4.2.1.179 If it's earlier, you'll need to install the latest SR for ProPack. If you do have the latest, we'll have to discuss further!......

My python page
My ShareCG freebies


Lyrra ( ) posted Wed, 01 September 2004 at 9:58 PM

ah .. the patch thing might be it. I only upgraded recently to propack. should have thought of that ... doh :)



steveshanks ( ) posted Mon, 06 September 2004 at 4:02 AM

Just used it and its AWESOME, thanks loads ;o) ;o)......Steve


lynnJonathan ( ) posted Mon, 06 September 2004 at 12:51 PM

WOW! This saves me hours of boreing work. I hate loadeing and nameing morph after morph. I've been asking for something like a long, long time. THANKS! My life just got easier.


Privacy Notice

This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.