My 200 hours did include all the ERC, both the JCJ that didn't fly and the JCM that replaced it. The JCJ time wasn't totally wasted, it gave me some new ideas, and also showed what was required when I did the JCM, which basicly replaced joints with morphs, item for item.

Also bear in mind I'm trying to do a GOOD job... ;-)

For comparision, I set my low-res Poser figures (shown next to IV) up in a total of about 4 hours, I started with the Posette CR2, moved the joints around as required, no JCM, no teeth, she actually poses a little better than the Posette on a good day. I purposely made the mesh so the parts were in roughly the same pace as the Posette, to make this easier.

I also should mention that I don't think it is going to be easy to rig a figure with the arms's mesh running straight down, as the Zygote figures seem to have. The "up" bend is going to be a nightmare, with close to 180 degrees of change.

Oh, about GJ, right now GJ has the low-res head, but when she is finished she will also have a version with the high-res head and stock (high-res) neck, those two parts should be able to take morphs intended for regular hi-res Jessi. Body morphs will not transfer.

And if you look at clsteves reply in the "long" thread about these figures you will see something intresting that nobody seems to have picked up on...

Message edited on: 05/22/2005 13:20