Hi acadia, Sorry. I should have posted the settings. It would have been a lot easier. Here they are. Dolly camera Focal - 800mm hither - 0.016 Zscale - 20% X/Yscale - 100% Roll/Pitch/Yaw - 0 DollyZ - 6.650 DollyY - 0.750 DollyX - 0.000 These setting should give you a view of the face and shoulders, although my figure is quite tall, so you may have to adjust the DollyY setting. I only used the Dolly cam because I was playing with it at the time, and it's the only one you can physically move back/forward. But I've tried it woth different cameras, figures and lights and it seems to work every time. If you change the Zscale setting from 5% to 50%, the skin will change. Lower values = stronger effect. Make sure you're using Native Units in P5 and not feet or metres. And definitely make sure Hither is set to either zero or the default 0.016. Hope this helps. mac