Fri, Nov 29, 5:38 PM CST

Renderosity Forums / Bryce

All Forums

Welcome to the Bryce Forum

Forum Moderators: TheBryster

Bryce F.A.Q (Last Updated: 2024 Nov 26 4:28 pm)

[Gallery]     [Tutorials]

THE PLACE FOR ALL THINGS BRYCE - GOT A PROBLEM? YOU'VE COME TO THE RIGHT PLACE

Subject: How Would You

bobbystahr opened this issue on Apr 30, 2010 · 13 posts
Back to Forum Print
bobbystahr ( ) posted Fri, 30 April 2010 at 2:18 PM · edited Fri, 29 November 2024 at 4:01 PM

 Model an acoustic guitar neck in Bryce. There are complex tapering curves athe the heel of the neck and along the neck itself there is a long tapered curve. I've managed to get the neck and headstock shape made in the terrain editor and booled the headstock angle out, but can't seem to get the booleans to work after doing 2 cuts and conversions....any ideas...if you have a better method I'm willing to start again but  it has to be all Bryce technique..I'd supply a scr grb but it'son the other box in the other room...thanks all in advance.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again



 

 

 

 

 

RodsArt ( ) posted Fri, 30 April 2010 at 4:06 PM

Is this the section you have in question?

http://www.collingsguitars.com/Images/faq/neck-assembly-lg.jpg

___
Ockham's razor- It's that simple

bobbystahr ( ) posted Fri, 30 April 2010 at 4:34 PM

 Indeed....

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again



 

 

 

 

 

bobbystahr ( ) posted Fri, 30 April 2010 at 4:34 PM

 but on a Martin...LOL.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again



 

 

 

 

 

RodsArt ( ) posted Fri, 30 April 2010 at 5:46 PM

file_452099.jpg

The neck  (1) is a cone, stretched the height until the proportion of a neck taper seemed correct. Then boolean cut-away the unwanted portions of the length and radius while also compressing the height of the radius to represent the shallow depth of the neck . The fret board can be produced by duplicating the same peice and boolean the curved side away to leave a flat board while still maintaning the taper from base to head. 

The curve (2) is the inside portion of a torus with all the unwanted portions booleaned and cutaway by using combine.

Section (3) is a duplicate of # (1). the length was compressed showing the extreme taper.

This is a quickly thrown together model, though I'm sure with a little more TLC as with Chris's train modeling, it would be difficult to discern from a standard 3d model. I can only imagine the trick will be to get all the texture (shader) materials to coincide.

Good Luck, keep us updated.

___
Ockham's razor- It's that simple

TheBryster ( ) posted Fri, 30 April 2010 at 6:10 PM · edited Fri, 30 April 2010 at 6:10 PM
Forum Moderator

You could probably do the whole thing in one piece, but it'd take a while. (Time I don't have - sorry)

Rod's take on this is very good though.

Gotta love booleans!

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster


And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

bobbystahr ( ) posted Fri, 30 April 2010 at 8:19 PM

 Thanks for the input...I've been working with HiRes terrains and for the body it's a piece of cake...I'll take a run at Rod's next time I try.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again



 

 

 

 

 

Rayraz ( ) posted Sat, 01 May 2010 at 2:06 PM

@rod: Damn your solution is pretty much genius!

(_/)
(='.'=)
(")(")This is Bunny. Copy and paste bunny into your signature to help him gain world domination.

TheBryster ( ) posted Sun, 02 May 2010 at 6:29 AM
Forum Moderator

Of course Rod's a genius. He booleans! :lol:

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster


And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

RodsArt ( ) posted Sun, 02 May 2010 at 9:16 AM

I guess that makes me an "Ole BooleAner" from way back!! LOL

___
Ockham's razor- It's that simple

bobbystahr ( ) posted Sun, 02 May 2010 at 9:52 AM

 Well I haven't managed to figure out that torus trick Rod...could you send me an unconverted [booleans showing] version so I can see what I'm supposed to do. Obviously you can't make the one I want, but if I can see it I can make it work for me...thanks in advance. Send it to my mts.net addy...I think you may have that or Site Mail me and I'll send you the addy.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again



 

 

 

 

 

RodsArt ( ) posted Sun, 02 May 2010 at 8:03 PM

which version of Bryce do you have?  Tomorrow I'll put together a set with easy colored  cut away pieces. I'll post it to my site where you can DL it.

___
Ockham's razor- It's that simple

bobbystahr ( ) posted Mon, 03 May 2010 at 1:43 AM

 6.3 and 7 Rod thanks.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again



 

 

 

 

 

Privacy Notice

This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.