Quote - I was able to get the white shoes to fit alyson 2 in the fitting room very easily.

1. load Alyson (not Ana)

2. load the shoes (don't conform)

3. turn off IKs on alyson

4. set the right shin on the shoe to 5.4 and the left shin to -5.5 ( I ad a little pock through that I ginored until later)

5. go into the fitting room

6. create a new session

7. Add the shoes to object and Alyson to goal. Uncheck the zero figure.

8. do not click on fit

9. click on create figure

10. type in the name you want for the new shoes

11. in the transfer body parts window click on the box nect to alyson to clear everything.

12. Scroll down to lToe and check that box

13. scroll to rToe and check that box. all other needed boxed will be checked automatically.

14. make sure the 3 options at the bottom are check.

15. click ok

16. hide the original shoes and make sure you hade the new ones selected.

17. click on copy joint zones from... and choose Alyson

18. Conform. They should fit.

19. Use the morph brush to fix any poke through.

optional 20. load the Ana morph and copy morphes to shoes from Alyson.

 

Wardrobe wizard might work too. Shoes can be a little iffy there sometimes.

Ohh man! I had to wait a to work on any of  my poser stuff because the drive I was using for my files had to be RMA'd. I've got a new drive back from WD and everything seems to be working from my backup. Thank you RP for the amazing step by step, I'm going to five this a try and see what I get!