The camera can Dolly +- 860,000 feet. If you go to the Parameter Settings for the Camera you wish to use find the under Transform will be DollyZ, DollyY and DollyX. The number next to the dial is the current value of the parameter. it will say something like 1.850. if you click on the dial and slide it back and forth the numbers change. If you then click the sideways arrow and then settings it will show you the parameters for the channel. The name, current value, Min Max value and Sensitivity. It starts at 1.000000. This means the last number you see above will change by 1 which time the dial is moved. Being as my current interface setting are set to Poser Native Units then if I click on the left or right bump arrows the value of the dial will change by 0.001 units, which is 1/1000th of 8.6 feet, very small movement. if I change the Sensitivity to 100 then the number will change by 1/10 of a PNU or about 10" give or take. If you change it to 10,000 then each bump will move you 100 PNU's or about 860 feet. That should get from one side of the scene to the other very fast. The only problem is that you lose fine tuning until you back and change sensitivity again.

Poser 5, 6, 7, 8, Poser Pro 9 (2012), 10 (2014), 11, 12, 13