marinke opened this issue on Jan 09, 2003 · 20 posts
marinke posted Thu, 09 January 2003 at 10:56 AM
Hellow,
I need a model for Bryce from a 2CV (deux chevaux).
It's an old Citro-car, a real old-timer might you call it.
Does anyone know where I can find this?
If all else fails, just pics (computergraphics only) are okay too.
Thanx!!!!!!!!!
Greetz, Marinke
TheBryster posted Thu, 09 January 2003 at 1:34 PM Forum Moderator
We usually get our 2cvs out of skips in the UK......You might try the Citroen website if there is such a thing...
Available on Amazon for the Kindle E-Reader
All the Woes of a World by Jonathan Icknield aka The Bryster
And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...
marinke posted Thu, 09 January 2003 at 1:39 PM
I already tried the site... new models only :( not even a small pic!!! So... Anyone with good ideas? xxx
Erlik posted Thu, 09 January 2003 at 2:01 PM
http://www.3dworldclub.com/preview.aspx?ModelCode=588 http://www.3dcadbrowser.com/preview.aspx?ModelCode=588 Which is basically the same, I think, because the layout of the pages is the same and so on. The membership on the site is $49. They have megaoodles of various models. And they have a pic. :-) TurboSquid has a low poly model, but they want $54.50 for it. I mean, for a 500-polygon model? Is someone crazy here?
-- erlik
marinke posted Thu, 09 January 2003 at 2:05 PM
Thanx! Now I need to find $49 somewhere... Well, if anyone finds those or either a free model, it would be very appreciated :) Thanx Erlik! Grtz Mrnk
Elsina posted Thu, 09 January 2003 at 2:05 PM
Attached Link: http://shape.cs.princeton.edu/search/info.cgi?mid=320&dataset=all&db_id=2&ip=212.25.76.3&search_id=
There is one on the CDs of the 500 Espona models book of Taschen (39 dollars, for book and 2CD's, at Amazon). I think it is this model.http://shape.cs.princeton.edu/search/redirect.cgi?ip=212.25.76.3&search_id=23&rank=2&dataset=all&db_id=2&mid=320&type=ref&url=http%3A%2F%2Fwww.deespona.com%2F3denciclopedia%2Fmodels%2Fcitroe.html
Sorry it is not free, but the book with 2CD's with 500 models for 39 dollars is a good deal.
marinke posted Thu, 09 January 2003 at 2:08 PM
Good tip Creations! Thanx very much!!!! But still... Sorry :) Am I being anoying?
Elsina posted Thu, 09 January 2003 at 3:05 PM
Attached Link: http://www.maxnet.ru/aks/models_R.html
I have browsed all my "free" sites and didn't come up with one. If you decide to use another car, some nice ones here
marinke posted Thu, 09 January 2003 at 4:20 PM
Thanks a lot guys! :-) You've really helped me out here! Enjoy your day (it's almost midnight here, I live in Holland)! Greetings, Marinke
Roch222 posted Thu, 09 January 2003 at 5:51 PM
Attached Link: http://www.geocities.com/MotorCity/4947/ctwrld14.htm
try here
Rayraz posted Fri, 10 January 2003 at 5:31 AM
Hey, een Nelandur. 8P I'll go look for a 'lelijk eendje'. I can't guarantee anything but I'll have a look. My next lesson starts in 1.5 hours, so there's plenty of time.
(_/)
(='.'=)
(")(")This is Bunny. Copy and paste bunny into your
signature to help him gain world domination.
Rayraz posted Fri, 10 January 2003 at 5:34 AM
Does this link to a 2CV model? http://www.cadthai.com/download.html look for the link called "öյ 2CV [243 kb]" under "3D MODEL (3D Studio)" I can't test the link because downloading isn't possible with the security settings on the new network here at school. I don't have my registry-crack disk with me either.
(_/)
(='.'=)
(")(")This is Bunny. Copy and paste bunny into your
signature to help him gain world domination.
Rayraz posted Fri, 10 January 2003 at 5:44 AM
Okay, I used a little trick and could download the model. The link works. I still can't open it though.
(_/)
(='.'=)
(")(")This is Bunny. Copy and paste bunny into your
signature to help him gain world domination.
Elsina posted Fri, 10 January 2003 at 5:48 AM
Veel succes Marinke. Ik ben ook Nederlands! Mijn beste vriendin had zo'n lelijke eend, met klapperende raampjes. :-))
Rayraz posted Fri, 10 January 2003 at 6:00 AM
Meer nederlanders hier op het forum dan ik dacht... Mijn moeder heeft ook nog een lelijke eend gehad. Zeg Creations. Kan jij even testen of mijn link inderdaad een bruikbare 2CV oplevert? Ik heb hier geen 3D software op deze computer.
(_/)
(='.'=)
(")(")This is Bunny. Copy and paste bunny into your
signature to help him gain world domination.
Rayraz posted Fri, 10 January 2003 at 6:02 AM
Here's another link: http://www.3dmodelsharing.com/details.php?id=276 Can Bryce handle DWG files?
(_/)
(='.'=)
(")(")This is Bunny. Copy and paste bunny into your
signature to help him gain world domination.
TheBryster posted Fri, 10 January 2003 at 8:13 AM Forum Moderator
Marinke: I've just looked through my entire collection of 3D Objects and I'm sorry to say that no one seems to have done a Citroen let alone 2cv...........now if you want a Delorean...........
Available on Amazon for the Kindle E-Reader
All the Woes of a World by Jonathan Icknield aka The Bryster
And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...
Elsina posted Fri, 10 January 2003 at 12:06 PM
Rayraz, het bestand heet 2CVscenes en ik heb het gedownload maar het is een max file. Dat kan ik niet openen.
Erlik posted Fri, 10 January 2003 at 2:29 PM
Well, Creations, I succeeded in opening it. Don't ask, black magic. Actually, I have a friend with 3D Studio. :-) Yes it is a 2CV, but we had to convert it into dxf in order to import it into Bryce. As 3ds it came in parts. It had some NURBS bits in, and that's probably what caused the problem. Even like dxf, it has problems, like the tyres being too big for the rims. And it has only a half of a soft-top. And it's not textured, of course. What I'd like to know is what is a model by a Russian (Andrei Kosov, and with a Cyrillic inscription) doing on a Thai (AFAICS) site. Anyway, anybody has any idea what I may do with the model? May I send it to marinke by mail, since it's free there anyway? It's 292 kB zipped, BTW.
-- erlik
marinke posted Sat, 11 January 2003 at 4:44 AM
Sure you may mail it to me!!! :-) We'll figure out how to get it to work in Bryce properly :-P Thanx again!