The important things to remember when you're using RealEyes, is that there are 5 components to deal with. The first is the white of the eye, this should be a glossy white with high specularity. Then, still part of the figure, is a black part. this needs to be very reflective black, and almost complete transparent (98%). The RealEyes have 3 parts each, a pupil, an iris, and an outer layer. The pupil needs to be black, with very high (white) specularity and a small degree of reflectiveness (about 5%). The coloured part of the eye needs have equal amounts of reflectiveness and specularity as the pupil. Finally, there is the outer layer. This needs to be pure white, highly reflective (10%) and almost transparent (80-90%). You'll needs to turn the diffuse setting down quite a way too. Again, if you'd like materials for these in Bryce, drop me a line. And thanks to bushi for creating these - all my figures (except Vickie) now sport RealEyes. Paul