Forum: Poser - OFFICIAL


Subject: Modelers used with Poser

DeepLayers opened this issue on May 21, 2004 ยท 22 posts


DeepLayers posted Fri, 21 May 2004 at 5:48 AM

I'm sure this has been asked many times but I don't frequent this paticular forum much and I apologize in advance for the repitition. All I want to know is what programs are used by most to create clothes and accessorries for Poser. I've been a Mac user for years but have started venturing over to the 'darkside' over the past few years and have found it's not quite as dark as most avid Mac users will have you believe. I primarilly use ElectricImage Universe but I'm willing to bet the farm that that's 'not' the weapon of choice by most.


drgonzo posted Fri, 21 May 2004 at 6:12 AM

I use Maya Complete for Windows (available for Mac OS as well)... but its quite expensive and hard to learn - on the other hand its very powerful.


Little_Dragon posted Fri, 21 May 2004 at 7:15 AM

Mine is at the opposite end of the price/learning-curve/power spectrum ... MilkShape 3D.

I've used trueSpace in the past, however.



xantor posted Fri, 21 May 2004 at 7:42 AM

Imagine 3d.


dan whiteside posted Fri, 21 May 2004 at 8:32 AM

On my Mac I use FormZ: http://www.formz.com/ but I've been messing with the free version of Maya http://www.aliaswavefront.com/ (had to get a 3 button mouse though!) and I'm really thinking about switching. Besides these 2 Mac programs , I've seen these used with Poser and there are (or will be) Poser Plug-ins: Carrara/Amapi/Transposer - http://www.eovia.com/ Lightwave - http://www.newtek.com/ Cinema 4D - http://www.maxon.net/ Here's a couple more Mac modelers: Wings - http://www.wings3d.com/ Pixels3d - http://www.pixels3d.com/ Electric Image - http://www.electricimage.com/ Blender - http://www.blender3d.com/ HTH; Dan


dan whiteside posted Fri, 21 May 2004 at 8:32 AM

On my Mac I use FormZ: http://www.formz.com/ but I've been messing with the free version of Maya http://www.aliaswavefront.com/ (had to get a 3 button mouse though!) and I'm really thinking about switching. Besides these 2 Mac programs , I've seen these used with Poser and there are (or will be) Poser Plug-ins: Carrara/Amapi/Transposer - http://www.eovia.com/ Lightwave - http://www.newtek.com/ Cinema 4D - http://www.maxon.net/ Here's a couple more Mac modelers: Wings - http://www.wings3d.com/ Pixels3d - http://www.pixels3d.com/ Electric Image - http://www.electricimage.com/ Blender - http://www.blender3d.com/ HTH; Dan


Gareee posted Fri, 21 May 2004 at 8:35 AM

Just about every 3d modeler you can thing of. Lightwave, Max, Rhino, and maya seem to be the most popular ones.

Way too many people take way too many things way too seriously.


pakled posted Fri, 21 May 2004 at 9:58 AM

Attached Link: http://www.wings3d.com

Wings 3d is for Mac, Windows, and Linux (only tried the last 2..;) it's free, lo-poly, but good place to start learning..I've seen some good things done with Cinema 4..but most of the stuff I've seen around here has been Maya, Rhino, Lightwave, and Autocad (all available for the price of a used car to a used moped..;)

I wish I'd said that.. The Staircase Wit

anahl nathrak uth vas betude doth yel dyenvey..;)


stewer posted Fri, 21 May 2004 at 11:34 AM

I second Wings3D. Free and good. Using a (comparably) high-priced 3d suite like Maya or 3ds just for modeling Poser figures is, IMHO, a waste of money.


bobcat574 posted Fri, 21 May 2004 at 1:46 PM

it all depends on the preferences of the modeller. Personally I use studio max 6 for the clothing mainly because I find the boolian operations easier in max. Props I do in lightwave 7.5 because the modeller has better precision tools such as bandsaw. For characters, I jump to cinema 4d 8.5 because the nurbs options are great to work with and it has a super fast renderer on slow systems. I know all of the work can be done in one program, but again, modellers preference, I like to have different options available to me. p.s I put my vote in for wings 3d as well, exellent program for the price, also blender is a good program, though its harder to learn the interface.


Gareee posted Fri, 21 May 2004 at 3:45 PM

Yeah but bobcat, not many people have the kind of cash to buy all three of those main modeling programs... that's what? $2000-$2500 worth of modeling software?

Way too many people take way too many things way too seriously.


bobcat574 posted Fri, 21 May 2004 at 4:09 PM

more actually. That is one of the major drawbacks of the top end software, unless you use them to make money, they are not exactly economical for the hobby lover. But if a person was truly committed to buying the software, go with cinema. Easy to learn, powerful rendering system, awsome hdr capabilities with the caustics and radiosity. (Something that max seriously lacks in considering the price!)


Gareee posted Fri, 21 May 2004 at 4:13 PM

I'd have to disagree.. if I was going with one program, I'd still stick with Lightwave. I love the modeler's interface, it doesn't load the animation part unless you want it, and the results of many yv shows and movies speak for themselves. LW8 looks to be even nicer, with it's clothing room, and enhanced setup tools. But everyone will have a favorite.

Way too many people take way too many things way too seriously.


DeepLayers posted Fri, 21 May 2004 at 8:19 PM

Thanks for all the feedback. I didn't realize that the import options were so many. I guess what I didn't realize is that so many programs support one of the import options. Thanks


bobcat574 posted Fri, 21 May 2004 at 9:19 PM

Happy to help, and I have to say, I have been drooling over the lw 8 for some time now! but unfortunatly I need to upgrade the old pc first.


Gareee posted Fri, 21 May 2004 at 9:20 PM

Well, the main file format is wavefront, and many programs support it.

Way too many people take way too many things way too seriously.


Gareee posted Fri, 21 May 2004 at 9:20 PM

Well, the main file format is wavefront, and many programs support it.

Way too many people take way too many things way too seriously.


bobcat574 posted Fri, 21 May 2004 at 9:36 PM

Come to think of it I have yet to use a program that doesn't support .obj. It is one of the main formats common to the 3d world.


DeepLayers posted Sat, 22 May 2004 at 8:07 PM

You're absolutely right. I didn't realize how prevalent it was. My own modeler (ElectricImage Modeler (EIM)) even outputs OBJ (duh). In my own defense though, I have heard that the EIM OBJ export doesn't support everything, like UVs (I think). There's an update of Universe (EIU) being released this coming week so maybe that's changed anyway. At any rate thanks for all the feed back. At the very least it has removed a mental block regarding creating stuff for Poser.


Quoll posted Sun, 23 May 2004 at 3:17 PM

Poser users should check out something like Silo. It's only $100 bucks and is very capable. It's not the modeler that you would find in Maya, Lightwave, etc, but if you have one of those applications it would be much smarter to animate and render in that package as well, rather than going back into Poser.


sicowan posted Mon, 24 May 2004 at 5:13 AM

Hello, I have recently been using ZBrush 2.0 to create textures and re-jig/ create new models. Its really fast to use, fairly easy to learn and cheap at the price. I would seriously consider looking at this package in future for working/ re-working poser models / textures.


bobcat574 posted Wed, 26 May 2004 at 9:00 PM

Z-brush has to take the cake when it comes to texture maps, the pure simplicity of it is mind blowing in itself. It's one of those can't live without programs.