Well, I guess this thread will be dedicated to everyones requests for models(.obj,.3ds,.obp).Please try to limit the requests to things that haven't been modeled(or done badly).Also, everyone here that can model(you know who you are!)check on the thread every so often for model ideas.Hopefully this way,not only will the bryce community get objects for its scenes,but it will give some good practice to all of us modelers. Note:Modelers,I have 60 megs of webspace,30 of which I will share if hosting is needed(PM me first)

I eat babies.

I am ready !!! :) But i do not do organics, just regular stuff, you know, mailboxes, street signs and other stuff, I do like to do it, but also requests like modeling cars and high detail models are kind of, out of question, my modeling time is relatively limited ! :) That's what I can offer, for now...

Something I've always thought would be cool... would be a fairly large water plane object like a lake top, during a rainy day. Something with ripply effects and little splashes.

That's simple to do muddy grub. Draw a nice 900 x 900 grey scale bump map of your concentric ripples and waves. IMport as image in terrain editor and apply any water material then edit the material by importing THE SAME greyscale image into materials editor as the bump map ...tweak parameters and Viola,,,just add some volumetric textures to large spheres for rain...expect an involved render.

well i can do sci-fi, buildings, mostly any non-organic.

Experience is no substitute for blind faith.

http://avalon2000.livejournal.com/ - My Art Blog

http://jeferies.jalbum.net/Richard%20Jeferies%20Future%20Perfect/

I'm forced to ask, Prufrock, are you a T S Eliot fan? That's one of my favourite poems! :o)

RJ001: .....and I can do the impossible!!!!! LOL What a team!!!!!

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

There is also this nice and free ripple filter for PSP: http://www.redfieldplugins.com/RedfieldPlugins.exe Hope this helps too !!! :)

okay Bryster, how about a challenge, you an me outside, meshes at 40 paces.

Experience is no substitute for blind faith.

http://avalon2000.livejournal.com/ - My Art Blog

http://jeferies.jalbum.net/Richard%20Jeferies%20Future%20Perfect/

This thread will soon be buried where nobody will find it. I am willing to try modeling most objects except creatures.

look in the forum header at the top GG, AS made this official.

Message edited on: 06/01/2004 10:58

I eat babies.

Great ripples, but I really meant something with some of the splashes having more detail. Maybe one layer with the ripples, and another object with some of the ripples having matching droplets and splashlets etc. You know what I mean?

Actually, wouldn't it be wiser to make this a monthly thread? Over time I have reason to believe this thing will get huge once the requests actually start to pile in. Anybody need some kind of appliances, cars, tools, that kind of stuff? I'm ready whenever...

---

Barbequed Pixels?

Your friendly neighborhood Wings3D nut.
Also feel free to browse my freebies at ShareCG.
There might be something worth downloading.

@MuddyGrub-adding "splashlets" and "droplets" would be easiest with meta-balls.Or, do you mean actual drops of water(as if raining),with corresponding ripples and splashlets in the water plane? If so,i can do that(i have advanced water simulation for c4d),but the file might end up gigantic(vicky 3 size&detail).I'll see what I can do(I'll blast small waterdrop objects through a particle emmiter at the water plane,then freeze the mesh in "mid rain" and export an .obj&.3ds).

I eat babies.

TWISTED!! That would ROK please do so and post it here I certainly would be interested in that.

Attached Link: http://www.acclaimimages.com/cgi-bin/photobase/search.pl?startat=0&how_many=15&action=search&search

I wasn't talking about rain, although that might be kinda cool. At this link you'll see several closeups of water splashlets and ripples. That's more of what I'm talking about. Yes metaballs would work, but what if there are 50, or 100 little splashes... alot of work. If it were one object it would sure be alot easier!

Ok,I started a new thread for the water models(or anything else about water in bryce).From now on we should keep the posting to a bare minimum,unless its a request of course.To save space,if you resond to a request,start a thread named after the said request and go from there. @Prufrock81, If you can, repost the link&pics you posted here,in the water thread.Then delete the post here to save space.I just got my post out too.

I eat babies.

• okay Bryster, how about a challenge, you an me outside, meshes at 40 paces. * RJoo1: OK! Impossible triangles at 30 paces........! (Or should that be 15 paces inverted to allow for breaking the laws of physics?)

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

Okay - I would like to do a request! I need a sci-fi backpack. It's actually a portable timemachine/transdimensionel device! Would be cool if it had sort of a retro/semi-steampunk look. It uses one battery at a time, but there is room for two sparebatteries (I envision the batteries sorta like a metallic/bras can (like a can of food)). There is a controlpanel that can be removed from the backpack by the user (like the "telephone" from the radioguy in warmovies) - it's connected with a cord. It would be cool to see this in 3d ... anyone interested? ;) I would love an email if anyone wan't to try this... : udgang99@hotmail.com KiiiM

ahh, one of the easy ones to start with....

Experience is no substitute for blind faith.

http://avalon2000.livejournal.com/ - My Art Blog

http://jeferies.jalbum.net/Richard%20Jeferies%20Future%20Perfect/

OK OK I'll do it for $55 =OP

You can have this for FREE if you like, can't do the curly cable but sure someone here can. (image is native 3DS format model, no texturing)

Message edited on: 06/04/2004 05:04

Experience is no substitute for blind faith.

http://avalon2000.livejournal.com/ - My Art Blog

http://jeferies.jalbum.net/Richard%20Jeferies%20Future%20Perfect/

Great Stuff, Rj.....all it needs now is a clock!

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

rj001: WOW !!! I can't belive you did that - and so quick! I would LOVE to have it! If you can mail it to me, send it here: master@globalcomicjam.com ... or tell me where I can download it. Thanks. I'm going to use this in poser... now, I'm no shark at this - but does it have a uv-map (that's what it's called, right?), so I can put texture on it?

He want's to use it in POSER.....AAGGGGHHHHHH!!!!!!!!!

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

Whaaaaat???

Just kidding!

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

Attached Link: http://www.avalon3d.com

total CAD time 35mins, i'll put it up on my website this weekend, promise, want to test render it meself IN BRYCE first. Uv map, sorry WYSIWUG, but please let us know how it turns out.

Experience is no substitute for blind faith.

http://avalon2000.livejournal.com/ - My Art Blog

http://jeferies.jalbum.net/Richard%20Jeferies%20Future%20Perfect/

"...but please let us know how it turns out." I sure will!!!

Attached Link: http://www.avalon3d.com/models.htm

go get it

Experience is no substitute for blind faith.

http://avalon2000.livejournal.com/ - My Art Blog

http://jeferies.jalbum.net/Richard%20Jeferies%20Future%20Perfect/

YEAH !!!

seems the thread has died......

I eat babies.

Hmmm, I guess nobody needs any models, hard to believe !!! :)

By the way, if somebody needs some organic stuff, I'm interested to try modeling it.

Hey..I need a model! Nopes..don't want to use it in poser..if you remember..I had started this thread of a company whow ants me to create a logo in bryce (charging them nothing..my nephew starting up a new company)... need a model of a trawler ship..basically..want the bow..frontal, head on view, with a chimney ontop. Me so not good at modeling.. flunked maths in school.. HELP!!

how long we got ?

Experience is no substitute for blind faith.

http://avalon2000.livejournal.com/ - My Art Blog

http://jeferies.jalbum.net/Richard%20Jeferies%20Future%20Perfect/

about a week or so, rj100

yikes!....rj100,your good at vehicls.

I eat babies.

rj..don't need to do the whole ship..just the front bit.. I got one from paul...hopefully that will work. Since it's a logo..detailing not needed.

actually may not be able to make it after all, time and tide against me, anyway, someone elses turn.

Experience is no substitute for blind faith.

http://avalon2000.livejournal.com/ - My Art Blog

http://jeferies.jalbum.net/Richard%20Jeferies%20Future%20Perfect/

Re Muddy grubs request for rain splashs on a lake-
have a look at my animation-end of the dry season 2-in my gallery splashes are a terrain shaped with a greyscale made in photoshop-could send you the psp file if you like- Ken

I have a very simple mesh request. On the toy train above, the front piece (cattle catcher?) is too sharp for a children's toy. I need a rounded edge version of that piece. The original was made by booleaning a Bryce pyramid to cut off the top and back half. If it matters, the toy train will be used in artwork I'll sell for profit.

Attached Link: http://stevesartgallery.bryce-alive.net/

This guy has some nice new primitives on his site including rounded-edge pyramids....

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

Yeah, I tried one. The mesh isn't solid so it didn't boolean well.

Won't it become solid if you use the check box in the 'A' drop-down?

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

Ik'm not sure which check box you're referring to.

When you highlight an object it has a list of charecters....click on the 'A' and look for the tiny little button marked 'solid when boelean rendering'

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

No such button on my attrributes options.

No such button on my attrributes options.

Thanks Bryster and Jed for getting me on the right track (no pun intended). As seen in this pic, I did it.

WOAH! Sorry! I'm always getting that mixed up! Well done Jed! for putting me right....

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

Count me in on any requests... I'll try my best, but not so sure about breaking the laws of physics... ;)

Ttops: Nah! That's MY job....lol!

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

I'm modeling a house based on a real one in Prescott, Arizona. I can do most everything except one specific window (the one in this photo). Any takers? I'd want to, of course, easily change the three textures (green wood, red wood, glass). I sell most of my images, if that matters.

And the full house just to show it.

Is that guy in front swinging a bat just out of sight?

Nope. That's my step-dad and he has no bat.

Is the house haunted? ;^)

Yup. ;-) And it's in need of a modeled window.

Looks like a symetrical lattic job,give me a day or to to try it out.Sorry I'm late answering but I only check this thread every blue moon.

Thanks.

How's this? 20kb 3DS, group the lower frame and glass, then raise it on the y axis to make it open. Let me know. :)

Looks cool, but Jed already made me one.

no worries. :)

Hey,go for it jasonmit looks great and you can open it!.Never turn down a freebie,they will be needed sometime.

jaymonjay: Actually, Jed is right. Can you e-mail it to me at: jason_mitchener@juno.com

sent. :)

Hi all, new to Bryce and thought i would ask if someone could do a Model/Mesh for me. I'm looking for a UFO, now if you have seen Independence Day the movie that is the sort i'm looking for and as relistic as possible.

Tick: might be doable. how's about some reference pics?

Ok, this is hard... Can anyone model a Fuchikoma like those seen in the ghost in the shell manga? There was one a long time ago in some website, but I can't find it any more...

Aye, a Fuchikoma? I've seen Ghost in the Shell many times, but I'm not sure what you mant, lexland...? I'd love to try to model something from that movie...

Attached Link: http://www.starshipmodeler.com/R&V/fuchi.htm

That'd be great to see models from Ghost in the Shell! The Fuchikoma is some kind of crab/spider like intelligent vehicle. Here's some references I've found.

Aye, I was afraid you meant the tank! Well I don't know if I can model the whole thing without really going insane, but it's a good goal... Off to Rhino to give it a shot. Thanks for the pics, Lexland.

Since I'm not good at modeling, I don't know how hard it can be, but it really seems a big challenge! Thanks (and "tanks", in this case:)) for tryin, Shadow!

I am doing a scene involving a POW-MIA table(I recently posted a WIP). I need a ribbon that I can put around a vase. If you already know where to find one please tell me, I have been looking all over.

Tobin - If you can give me more specifics, I would be happy to try modelling it for you. Maybe post a link to your WIP?

Attached Link: http://www.renderosity.com/messages.ez?ForumID=107&Form.ShowMessage=1978144

Here is the link to the WIP.

The vase will be slightly different than the one in the image but about about 10x20x10.

Attached Link: http://ironweb.5gigs.com/freebies/table.zip

Well, first off, here's a quick table with table cloth. The table cloth is pretty high-poly, but it looks nice in Bryce. It is untextured, but has several material zones. :)

Secondly, what sort of ribbon do you want? With a bow? Looped around the vase several times? Or like one of those 'I support such and such' ribbons?

Thanks for the table cloth. The ribbon should wrap around once with a bow. I would like the ribbon to be pretty narrow. Like the one in the picture. Thanks.

I'll see what I can do.... :)

Attached Link: http://ironweb.5gigs.com/freebies/ribbon.zip

Try this one on for size. 3DS, untextured. It might need some adjusting, but you should be able to do that in Bryce.

Thanks! That looks like it will work just fine.

Hope so! ;) If there's anything else you need, please feel free to IM me. -Jay

Really easy model, i'm sure but I'm failing miserably at it. Just a nice easy shattering sphere, only stipulation is that i need more of the shatter directionaly at the top right of the mesh, using it for my friends local bands new cd cover, gotta have gold dust "spraying" (wrong word, but its close)(misting may be better) into an album title, rest of the image is going well, im working on a velvet marble bag but its going ok, thanks to anyone who helps. AJ

Henceforth SqueakyLefty will be called Laxtopia I changed my name =] thanks, aj

I need a Roast Turkey, as in Christmas dinner. A 3D model, not a real turkey. Anybody up for that ?

"Any club that would have me as a member is probably not worth joining" -Groucho Marx

I used your request for a roast turkey as an excuse to try and speed model it. (In under an hour I think.) Hows this for a model? (I could try mapping it, but it'll take longer.)

---

Barbequed Pixels?

Your friendly neighborhood Wings3D nut.
Also feel free to browse my freebies at ShareCG.
There might be something worth downloading.

Looks good to me !

"Any club that would have me as a member is probably not worth joining" -Groucho Marx

Damn that turkey looks good! Im salivating all over. The texture should be quite interesting. A glossy, juicy golden brown texture I envision for the main bird. Excellent job Pauljs75.

Yes, he did a wonderful job,.............and it is quite tasty too !

"Any club that would have me as a member is probably not worth joining" -Groucho Marx

Hey, good job, Paul !!! :D

I know im not that good, but i just wanted to tell you that if anyone would want a model by me they can send an IM with an adress to send the model to. I do almost all modeling in my pics so browse my gallery if theres any interest. Maybe you could improve the models so they look as they was intended to do :)

Good spelling is overaytead

How would you go about making a wizard's staff - with a large-ish shining jewel at the terminal? For Bryce4 - for a poser figure to hold. (preferably a faceted jewel, not a round smooth pebbly one)
FranOnTheEdge

Measure your mind's height
by the shade it casts.
Robert Browning (Paracelsus)

Fran's Freestuff

http://franontheedge.blogspot.com/

http://www.FranOnTheEdge.com

I do have something else I'd really like, I'd like a storm tossed ship - wooden type, not space type - you know sails torn, looking a bit the worst for wear. I do have an image of a painting I did a good while back with something a bit like what I'm looking for. For Bryce4. Probably too hard...? It doesn't have to look exactly like the image, but it should be old, ancient maybe. But not many tiered like Henry the VIIIth's ships, I'd rather it was simpler than that. Faintly piratical maybe, but no flags, nothing to distinguish it. FranOnTheEdge

Measure your mind's height
by the shade it casts.
Robert Browning (Paracelsus)

Fran's Freestuff

http://franontheedge.blogspot.com/

http://www.FranOnTheEdge.com

I'll admit this is a farely limited idea, because anyone outside of Ireland is unlikely to know what I mean. They are still in use today in the real tourist areas. this is what they look like

The greatest part of wisdom is learning to develop  the ineffable genius of extracting the "neither here nor there" out of any situation...."

I just Found this Thread!!!I can Model Anything SciFi and Also Buildings,in short anything that Expands the Human Mind! Try this; it's the Set of my Upcoming Adventure Game:

What is a CRIF?

Hello.....is there anybody there!
Not sure if this thread is still active, I had it bookmarked, but I have a request for a model.
It's the frame for a cockpit. I have a photo reference.
If anyone can help I would be grateful!!!

John.

*limit the requests to things that haven't been modeled(or done badly....*lets me out..;)

Gad, I do a different model for every pic I do..something on the order of 600+, more that 1 gig..;) I usually model something, and 6 months to a year later, someone does it in Rhino, 3DS MAX, or something, and blows mine out of the water..;) Pakled- the 1st, but the worst..;)

'an watch out for Drac, he makes good modles, but check the sizes..;) j/k..;)

 

I wish I'd said that.. The Staircase Wit

anahl nathrak uth vas betude doth yel dyenvey..;)

Hi johnyf. Is the cockpit from a "real-world" aircraft, or is it from a Sci-Fi(fantasy) craft? To do an accurate approximation of the cockpit of a real-world craft would require some dimensional data as well as reference pics, whereas a Sci-fi cockpit would allow for more flexibilty(fudge-factor) or liberal interpretation since it is not based on an actual existing craft. Any chance you can post a small pic to let us know what we might be getting into?

Hi Dan.  This is it. This will more or less be the pov as well. I need the frame and windows. The control panel stuff I can do in Bryce. I don't have any dimentional data though, I'm afraid!

Check with Dann-o, he has a Russian blueprints site that gives dimensions of a lot of aircraft. I'm at work, and don't have the site, but he should know about dimensions..

I wish I'd said that.. The Staircase Wit

anahl nathrak uth vas betude doth yel dyenvey..;)

I'm just looking at this again and checking more reference pics, and it's not as bad as I first thought. Originally , I thought the cockpit base was curved, which makes it really difficult in Bryce. But from other pics I've seen , it's actually angular. The only really curved part is the top, which won't be in the image!

Thanks for your interest so far guy's,but I'll try and carry on with it.  If I do have probs however,I'll start shouting!LOl.

This is what I have. I think it's ok. There were lots of Spitfires and they  varied in design, so this is a bit of a mix! lol. This is more the pov I wanted as well!

Looks very good Johny!

http://www.the-blueprints.com/

If you want blueprints for damned near anything with wheels or wings try this address