Ordered the new PC & monitor, monitor showed up today. Damn, now I can see things I've never seen before. Ugh, my gallery is screaming "more"! Once the new PC gets here I'll have no choice but to set up a cot in the office. ;) Thanks for everyones input about puters. I'm running the monitor on analog cuz my card isn't equipped for DVI...but the new one is! Shopped & shopped & weighed out the best outfit I could get for the money & time. Also planned so I could upgrade later & add on: dual monitor & a few other items. Here's the low down: PC Alienware MJ-12 7550a AMD Opteron 252 2.6 GHz 64-Bit Microsoft Windows XP Professional with Service Pack 2 Enermax EG651P-VE 24P 550 Watt Power Supply ATI FireGL V7100 PCI-E 256MB 3GB Dual Channel DDR Registered ECC SDRAM at 400MHz - 2 x 512MB; 2 x 1024MB 80GB Serial ATA 7,200 RPM w/8MB Cache 16x DVD / 52x36x52x CD-RW Drive Dual Integrated High Performance Gigabit Ethernet ********************************************************** Monitor SynchMaster 204T TFT-LCD Monitor. Specifications Display Type TFT Active Matrix LCD Viewable Screen Size 20.1 inches Pixel Pitch 0.255 mm Contrast Ratio 700:1 Response Time 16 ms Maximum Resolution 1600 x 1200

___
Ockham's razor- It's that simple

Ok, feel free to send it to me anytime! :)

Rudolf Herczog
Digital Artist
www.rochr.com

Nice! Just a couple things. Why only 80 GB disk? They are actually much more expensive per megabyte than a larger disk. For instance, 80GB is around $70 here and 200 GB is $120. Also, I think you should have gone for a FX Quadro instead of FireGL. Finally, why not a DVD burner? You might regret it very soon, when you have to fit everything on 700MB CDs.

-- erlik

Very nice ICM,good luck and happy Brycing with it.

Yup I would have also include 2 other backup drives of 120c GB And why go CD RW go DVD RW...

Why 2 120 GB backup...You ask.. You can run Server rendering Machines as Host.

cool stuff B-)

(_/)
(='.'=)
(")(")This is Bunny. Copy and paste bunny into your signature to help him gain world domination.

LOL, Sure thing Rudy, My wife will understand. Erlik: I have a 200,120 in this machine. Both maxtor 7200/8ms, and a 40 w/same specs. Probably the 200 will be going into the new box. I will be keeping this box for a short while, it has the burner. As far as the video card, I tormented over everything that was out there, I liked both, but the price got me. Eventually I'll be using dual monitors, and will also add an external HD. The smaller items like DVD RW are easy enough to add in later. Mind you, all these expenses need to pass the the highest scrutiny.....My lovely wife. (grin)

___
Ockham's razor- It's that simple

Nice setup ICM. Smart move getting that so you can "Upgrade" later.

Just one question i would like to ask, when can i come and start using it.. PS: if you add a dvd burner go for something like the LG GSA-4163B IDE duel layer, it burns both cd and dvd :)

Message edited on: 02/22/2006 17:33

I have opinions of my own -- strong opinions -- but I don't always agree with them.

 

Correct - you are in trouble now. 'cos were all gonna want to see those magnificently enhanced renders that you're going to produce with your new system... :-)) Cheers, Diolma

Ahhhh... Several Nights out to the Nearest waterfront resteraunt with Dancing and you will get it and more.

LOL @ Brian

___
Ockham's razor- It's that simple

Sa-weet setup...!

Contact Me | Gallery | Freestuff | IMDB Credits | Personal Site
"I want to be what I was when I wanted to be what I am now"

DROOOLLLLLLLLLLLL................

Dreams are just nightmares on prozac...
Digital WasteLanD

Sounds nice. Don't sweat the 'should have gotten...' because in three days eveything will be obsolete and something better is now available! Enjoy.