Go to the new DAZ homepage and you'll find a free download for Bryce 5.5 at downloads.com.

The Poser figure pack includes free M3, V3, A3 and H3.

My visual indexes of Poser content are at http://www.sharecg.com/pf/rgagnon

I downloaded it and tried to install it, but it asks me for a serial number.

Where do I get a serial number for it?

"It is good to see ourselves as others see us. Try as we may, we are never
able to know ourselves fully as we are, especially the evil side of us.
This we can do only if we are not angry with our critics but will take in good
heart whatever they might have to say." - Ghandi

Here's what it says on the download page:

You'll have to register your copy of Bryce 5.5 on the publishers web-site to gain access to your free Bryce serial number.

I noticed in the window asking for a serial number that it gives the following link to go to:

www.daz3d.com/bryce55

I managed to register my copy.

Is it a full working version or a stripped down version like 5.0 was? 

"It is good to see ourselves as others see us. Try as we may, we are never
able to know ourselves fully as we are, especially the evil side of us.
This we can do only if we are not angry with our critics but will take in good
heart whatever they might have to say." - Ghandi

If you can't get past the flash animation on dazs new page - the link for download.com is:

http://www.download.com/Bryce/3000-6677_4-10696717.html 

then like acadia says go here...

www.daz3d.com/bryce55 

...the serial will come up straight away.

Pinky - you left the lens cap of your mind on again.

I just finished downloading it. Now I have Bryce 5, 5.5 & 6.

Does it & the serial come up in your account page? like 5 did?

After you go to the link to get it, yes.

"It is good to see ourselves as others see us. Try as we may, we are never
able to know ourselves fully as we are, especially the evil side of us.
This we can do only if we are not angry with our critics but will take in good
heart whatever they might have to say." - Ghandi

Thanks. I got it. :)

Don't forget also that you can upgrade to Bryce 6.1 from your free registered 5.5 for $19.95 for a limited time.

Quote - I noticed in the window asking for a serial number that it gives the following link to go to:

www.daz3d.com/bryce55

I managed to register my copy.

Is it a full working version or a stripped down version like 5.0 was? 

 

I believe Br5.5 was the first version that Daz laid their hands on.
I twas more of an upgrade to Br5.01 than a new version.

I suspect that it is more or less the Main Engine.
Daz is selling a bundle with the extra content  cd from B5.

PS: Daz also dummied up part of Bryce to accomodate the way DS works.
If you happen to have 5.0 or 5.1 load up vicky for instance. You can texture each joint of each finger on her hand. Now do that in Br5.5 or 6 and all you can do is texture her hand.

Oh well, if you do not already have Bryce and want to give it a tryout, this is a great way to do it.

"That government is best which governs the least, because its people discipline themselves."
Thomas Jefferson

Bryce 5.01 was the version that DAZ purchased from Corel. B5.5 was the first update/upgrade that DAZ created afterwards.

Didn't they offer this package before for free?

Artwork and 3DToons items, create the perfect place for you toon and other figures!

http://www.renderosity.com/mod/bcs/index.php?vendor=23722

Due to the childish TOS changes, I'm not allowed to link to my other products outside of Rendo anymore :(

Food for thought.....
https://www.youtube.com/watch?v=pYZw0dfLmLk

Is Bryce mainly for landscapes or would it have value for rendering interior scenes from Poser? I have heard I could get better results rendering complete Poser scenes in a better rendering engine... would this be the case with Bryce? What is involved in rendering a Poser .pz3 in Bryce... I downloaded it last time it was free and could not figure out what to do with it. I am a perennial newbie, not very sophisticated I must admit.

I use it for landscapes & skys myself I haven't tried to use Daz models in it yet or to see if it works with Poser and it does have a very fast rendering engine I think. I'm gonna play with it and see if I can use Poser content in it today.

you have to start bryce then click button to go to studio then load your pz3 ect and it  does render poser stuff nice,

Bryce 5 was offered for free just prior to the Bryce 6.0 release in order to get people to buy the upgrade to 5.5, then 6.  Same marketing ploy here, only they're offering 5.5 this time in the hopes they can get more people to upgrade to 6.1

It imports things from poser pretty well, with help of Daz Studio which comes with it.
(Don't go the obj export way)
I really like it for quick outdoor scene lighting setup, with it's sun location and atmosphere settings.

Hi, my namez: "NO, Bad Kitteh, NO!"  Whaz yurs?
BadKittehCo Store  BadKittehCo Freebies and product support

Does it do the trick compare to Vue? Cause i use Vue6Pro for my Poser render and am pleased with, but perhaps Bryce has an interesting render engine too??

My Store

It's a stepdown from Vue.  But, for some silly reason I like Bryce :)

Hi, my namez: "NO, Bad Kitteh, NO!"  Whaz yurs?
BadKittehCo Store  BadKittehCo Freebies and product support

Does it worth i download it?

My Store

 I think it's worth the download. I like to render the skies for Poser backgrounds. That's good to know though so we can use our pz3 scenes with it.

If you have Vue6Pro it's not worth downloading at all. It's like using Vue 4 or even Vue 3 again. After all these years, Bryce still doesn't support direct Poser import, instead DAZ forces you to go import through D/S if you want to import Poser stuff into Bryce. That's the main reason I never upgraded from Bryce 5 to 5.5 or 6. I only will consider using Bryce if there's direct support for Poser, I don't need yet another application to interrupt my workflow.

Stick to Vue 6, much better.

Artwork and 3DToons items, create the perfect place for you toon and other figures!

http://www.renderosity.com/mod/bcs/index.php?vendor=23722

Due to the childish TOS changes, I'm not allowed to link to my other products outside of Rendo anymore :(

Food for thought.....
https://www.youtube.com/watch?v=pYZw0dfLmLk

I also never upgraded from Bryce 5 to 5.5 or 6.
Probably, I don’t get it even if it is free.

Why DAZ have to sell it (Bryce 6) so cheep?

I think DAZ philosophy is to sell the programs pretty cheap to build up user base for their content.

Hi, my namez: "NO, Bad Kitteh, NO!"  Whaz yurs?
BadKittehCo Store  BadKittehCo Freebies and product support

Why DAZ have to sell it (Bryce 6) so cheep?
Because it's really only worth $20 or so, since even Bryce 6 is still outdated a lot compared to it's direct competition.

Artwork and 3DToons items, create the perfect place for you toon and other figures!

http://www.renderosity.com/mod/bcs/index.php?vendor=23722

Due to the childish TOS changes, I'm not allowed to link to my other products outside of Rendo anymore :(

Food for thought.....
https://www.youtube.com/watch?v=pYZw0dfLmLk

I don't have Vue so it's worth it to me to download it and it's free. No complaints from me. I have used Bryce for a long time. Longer than Poser. It makes life easier for me if I can render out the sky & ground in Bryce to use the image in Poser and besides, there's plenty of Bryce freebies to use in Bryce so you don't just have to do landscapes. You can do full scenes with it.

Quote - I think DAZ philosophy is to sell the programs pretty cheap to build up user base for their content.

 

As a Bryce user since the very beginning of Bryce 4, I have very little desire to buy Daz 's Bryce Content.

Why, because they love to use the native Bryce Obp file type. Limits it's use to strictly Bryce.

Those few that offer Obj Bryce content get my vote. They can be used in Bryce or Poser.
I guess they could be used in Vue or Carrara as well.

"That government is best which governs the least, because its people discipline themselves."
Thomas Jefferson

I don't get much in a way of Bryce content for Bryce, but you can use most of Poser content in Bryce. (Via Daz studio import)
That way thiose whom are not into Poser, can still use Daz Content.

You probably already saw it, but in case you didn't, we are discussing it in this thread: http://www.renderosity.com/mod/forumpro/showthread.php?thread_id=2701074

As far as strictly bryce content, I think I purchased couple sky packs and as a matter on norm I get the bonus CD when upgrading ... but in general, my interests have always been in creating my own content rather then using other stuff, which, I think, makes me not your average user.

I have bought and used a LOT more poser content in Bryce, then actual bryce content. Some10 times more.

Hi, my namez: "NO, Bad Kitteh, NO!"  Whaz yurs?
BadKittehCo Store  BadKittehCo Freebies and product support

Quote -
I have bought and used a LOT more poser content in Bryce, then actual bryce content. Some10 times more.

 

Exactly!
The same here.
Not at all into using DS and have been importing Poser Content into Bryce for Years.

I consider it an imposition when I paid for Byrce, that it tells me I need to install Daz Studio.

"That government is best which governs the least, because its people discipline themselves."
Thomas Jefferson

I'm not a big Studio fan, but I have to admit that having them so tightly integrated, and FREE, pretty much rocks.

:lol: