Just got the notice...its here!  Well, actually its at Daz...lol

 

“For those who believe, no proof is necessary. For those who don't believe, no proof is possible.”

[Stuart Chase]

How about a link? :woot:

hahah Annie ya beat me to the posting:-P

Do atleast one thing a day that scares the hell outta ya!!

Here's the link:

http://forum.daz3d.com/viewtopic.php?t=144834&start=0

 

“For those who believe, no proof is necessary. For those who don't believe, no proof is possible.”

[Stuart Chase]

 Dumb question maybe but as a 6.3 user do I upgrade to 7 for $6.97?and then to 7 Pro for a further**$39.95 - $69.95?
**

Bryce 7 - Upgrade from Bryce 6

sale price: $6.97[

](http://www.daz3d.com/i/shop/itemcart?item=11037)##### Bryce 7 Pro - Upgrade

your price: $39.95 - $69.95

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

Pro will have a lot of new features Bobby that are unavailable in the standard version, new toys new toys new toys:-)

Do atleast one thing a day that scares the hell outta ya!!

I think the Platinum club discount comes off those prices as well to make it even less expensive.  Personally I would go with the Pro.

@bobbystahr...I think you can go straight to pro and by-pass the rest....but it does cost more. 

 

“For those who believe, no proof is necessary. For those who don't believe, no proof is possible.”

[Stuart Chase]

 Seemed to me like the Pro 7 was an upgrade from 7...am I incorrect in this assumption?

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

Quote - I think the Platinum club discount comes off those prices as well to make it even less expensive.  Personally I would go with the Pro.

Yep...I can get the full install for $35

 

“For those who believe, no proof is necessary. For those who don't believe, no proof is possible.”

[Stuart Chase]

Quote -  Seemed to me like the Pro 7 was an upgrade from 7...am I incorrect in this assumption?

I think thats only if you have 7 and want to go to pro...like if you buy 7 now and change your mind later and go for the pro.

 

“For those who believe, no proof is necessary. For those who don't believe, no proof is possible.”

[Stuart Chase]

Quote - > Quote - I think the Platinum club discount comes off those prices as well to make it even less expensive.  Personally I would go with the Pro.

Yep...I can get the full install for $35

Yeah it shows the upgrade from just for just under 21.00 with the platinum club.

Bobby....here's what it says on the forum link ...seems they have a free personal edition too...

**Now there is a Personal Learning Edition of Bryce available. That's right, you can get started using Bryce 7 standard without any up-front cost. This new PLE version provides a fully-functional, non-watermarked version of Bryce (MAC or WIN OS) that will NEVER expire.

The only restriction on the PLE version is that you may only use it for personal, non-commercial projects.

**

**Download Bryce 7 PLE right now to see what Bryce has in store for you.
**

 

“For those who believe, no proof is necessary. For those who don't believe, no proof is possible.”

[Stuart Chase]

But the PLE would not have all the toys,,,   yes / no?

  ----------------------------------------------------------------------------------------------------------------------------

No

Do atleast one thing a day that scares the hell outta ya!!

The upgrade from B6 to B7 pro.. plus 25% off => which comes to $29.  not bad at all...

  ----------------------------------------------------------------------------------------------------------------------------

Quote - The upgrade from B6 to B7 pro.. plus 25% off => which comes to $29.  not bad at all...

I'm guessing this would be the Platinium Club price...
I think what I'm asking is where in the range of 39 bux to 69 bux do I fall...
Most confusing for someone who has only ever bought 1 Bryce iteration/upgrade and that was with the kind consideration of an anonymous[by their request] member who sent a gift certificate for 6.3 when I was the only Moderator here, and had to have the full whammy to know what folks were talking about.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

$29.96 would be your price to upgrade to Bryce 7 from Bryce 6.3 if you are not a PC member.  There is a dropdown on the product page that you need to check to get your price.  If you are a PC member, then it is 30% cheaper.

"I'm guessing this would be the Platinium Club price...
I think what I'm asking is where in the range of 39 bux to 69 bux do I fall... "

NO.. Regular price...  put your order B8 pro,,   on the cart and you'll see the final sale...  you can have it waiting for you in the cart until you get ready to buy...

  ----------------------------------------------------------------------------------------------------------------------------

 Thanks all...added Br6 to 7Pro to my cart and it's on sale for $29.95...guess I gitta find my VISA card...long time since I had an emergency[only time I use the card]. Sorry for my confusion but I've never actually bought anything thru DAZ and it's a confusing path they draw out for a newbie to the DAZ universe.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

I did the same thing, I put it in "wishlist"; I mean, who knows...

At least it's not too bad a price either way.  Considering what other landscape software runs.

A further competitor (or a poor man's app) to Vue, I supose; and now we have a PLE!

Wow.

Edit PS: I was particularly sold with the volumetric clouds, even though it's a lot of work getting used to.

JB

____________________________________________________________________________________________________________________________

Asus N50-600 - Intel Core i5-8400 CPU @ 2.80GHz · Windows 10 Home/11 upgrade 64-bit · 16GB DDR4 RAM · 1TB SSD and 1TB HDD; Graphics: NVIDIA Geforce GTX 1060 - 6GB GDDR5 VRAM; Software: Poser Pro 11x

OONFUSED!!
ok..so i use 5.5.
If I upgrade to a pro..i pay  44.96
if i buy the pro..I pay  49.98
if i buy 7.. i pay 14. 98
if i upgrade from 7 to pro...  I pay  52.47

not a pc member..

does the pricing make sense???
and which one do i use..pro or just 7??

Long discussion happening at daz,,can someone make sense???

Standard is the fix on 5 an 6 versions, 15 years worth of most bugs are fixed now, we're still tweaking, Br7 Pro has new features in it that standard does not, you'll see the options in standard but you won't be able to access them. Trust me hon when I say its gonna be worth it Ero.

Do atleast one thing a day that scares the hell outta ya!!

Standard version will be like your normal Bryce has always been by the way, just not as buggy.

Do atleast one thing a day that scares the hell outta ya!!

Maybe this info will help....

http://www.daz3d.com/i/software/bryce7/comparison

 

“For those who believe, no proof is necessary. For those who don't believe, no proof is possible.”

[Stuart Chase]

@ erosiaart..

If you have pro 7 means you were a participant in the Beta B7... but do not own B6... 
Beta B7 as you know was free..  so they aren't going to let you upgrade from free to B7 pro for $14.98... he he...  wishful thinking...

  ----------------------------------------------------------------------------------------------------------------------------

Thats gonna be an "ask DAZ" questions cuz I have no idea on the marketing plan.

Do atleast one thing a day that scares the hell outta ya!!

Thank God for P-Club...lol
If I wait until this weekend when the PC vouchers come out I can get B7 Pro for $15.97.  Upgrade from 6.3 to B7 Pro is $20.97 for PC members.

 

“For those who believe, no proof is necessary. For those who don't believe, no proof is possible.”

[Stuart Chase]

Does anyone know if this will work on a quad core?  What about a six core?

Any help would be appreciated.

Yup it will, you are safe:-)

Do atleast one thing a day that scares the hell outta ya!!

AnnieD..somewhere..i read 6.3 get it for free.. check that daz post.. unless i've read it all wrong.

LOL..Clay.. are you into marketing? You'd make a good marketing chap.

I've put pro in my shopping basket.. lemme get back from my errands and an interview ..and i'll buy and download it.

Oooh.. bryce 7! rub rub my hands...

 Well I submitted my order and according to DAZ's profile on me I qualified for 7 Pro for $30.00  Canadian...so I did it.
Question: Should this be considered a brand new program and uninstall the BETA before installing 7 Pro?

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

Ero been is this biz for over 20 years, just trying to please the masses:-)

Do atleast one thing a day that scares the hell outta ya!!

For Bryce Pro is DAZ 3........whatever...required? And what would Bryce Pro cost me straight-up NOT being a PC member?

Why does this have to be so confusing?

Quest..I just bought it..some 48.98.. pro without being a pc member.. and straight out..not an update.

And the DAZ 3 issue?

clay..lol.. i bought it.. had half hour to play around with..
btw.. does it solve one thing?? being able to stop a render in the middle of a render to disc..and continue from where it left off?? my nitemare.. esp when power shuts out here..which is like..ten times a day,,

I haven't worked that out.. since I won't download it until tonite..when the internet is more stable. I did see comments and links on it in that post in Daz..

Attached Link: http://www.daz3d.com/i/3d-models/-/bryce-7-pro?item=11034&_m=d

On this Bryce Pro link on the side bar it says:

"Required Products
DAZ Studio 3.1.1.73"

Is this a requirement in order to run Bryce Pro and why should it have this dangle (monkey)?

hmm.. maybe clay can answer that...

No, in a sense it is not a requirement. Bryce will run without DS. However, if you do want to use Ds then you need to use the one that they are suggesting.

Also, make sure that after you put in your pro serial number, you close and restart Bryce, as this restart of the program seems to be necessary for the new lights to become active.

Quote - On this Bryce Pro link on the side bar it says:

"Required Products
DAZ Studio 3.1.1.73"

Is this a requirement in order to run Bryce Pro and why should it have this dangle (monkey)?

I dunno but it's free as well so why not...expands Bryce's ability once you get the hang of it...which I ain't yet...sigh.. always feel a little silly playing with dolls...LOL.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

I think they should clarify that in their advertising. Some of us may not use or want DS on our systems. It's like they're shoving it down your throat.

Thank you Rosie and thank you Rashadcarter.

Lemme clarify more, to make sure the D/S bridge from bryce works you need to have the newest version.

Do atleast one thing a day that scares the hell outta ya!!

They should say it just like that.

Thanks Clay

Good grief. You should all be so grateful that you'd be willing to sell your puters, lappys, your homes and all your possessions just for the privalage of just looking at the B7 box! :lol:

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

Lol.. if we can share your cozy chair..yes...

Yes You're right Bryster, We'll gladly take the Bryce but they can keep the rest. :glare:

See you're back on your horse Mr. Cardinal sir...welcome back and try to stay away from the virilus this time. :laugh:

Thank you, Questy. Nice to hear from one so survile. LOL
My connection seems to be much better now.

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

Why thank you your overbearingly arrogant, haughty, snobbish eminence.

I’m glad you were able to finally find the plug. :lol:

 

Quote - Good grief. You should all be so grateful that you'd be willing to sell your puters, lappys, your homes and all your possessions just for the privalage of just looking at the B7 box! :lol:

But I don't see the box!  I can only see a picture of the box.

Thanks, Clay ;)

I have Bryce 6.3 at the moment.. will wait and see what the upgrade path is.

Glad they finally bought out a truly new Bryce! :) just wish they had done so long while ago, grr.
cheers the Brycers :)

"I'd rather be a Fool who believes in Dragons, Than a King who believes in Nothing!" www.silverblades-suitcase.com
Free tutorials, Vue & Bryce materials, Bryce Skies, models, D&D items, stories.
Tutorials on Poser imports to Vue/Bryce, Postwork, Vue rendering/lighting, etc etc!

Don't know how or why but my PC upgrade from 6.3 to 7 Pro was six bucks!

I’m glad you were able to finally find the plug.

I did indeed, and if you'll just take a seat I'll plug it in the socket

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...

"I did indeed, and if you'll just take a seat I'll plug it in the socket "

LOL

Quote - I have Bryce 6.3 at the moment.. will wait and see what the upgrade path is.

S'what I had and the upgrade was $30.00 Canadian....good deal really...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

Quote - Don't know how or why but my PC upgrade from 6.3 to 7 Pro was six bucks!

Are you a Platinium Club member...that would do it.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

Just did the $29.99 U.S. Upgrade :)  Even if I dont use it, I'm still supporting the cause :)

i was beta testing bryce abd i already have a bryce 7 pro from the teating. is that all i need. am i already set?

Computer Art by Charles McChesney

Quote - i was beta testing bryce abd i already have a bryce 7 pro from the teating. is that all i need. am i already set?

Nope.  The beta versions will time out (in fact, they should have done so on Thursday...have you opened it this weekend?)  If you want to keep on with V.7, you have to pick up one of the newly released versions.

RosemaryR
---------------------------
"This...this is magnificent!"
"Oh, yeah. Ooooo. Aaaaah. That's how it starts.
Then, later, there's ...running. And....screaming."

i've been running a rather long render and it's still running. 97% complete. if i guess when i finally do close it, it won't start up again. i'll let ya'll know.

Computer Art by Charles McChesney

Yup.  I did that a few times with the betas... ran the render past the time-out period.  As long as you don't close, it'll stay active.

 

RosemaryR
---------------------------
"This...this is magnificent!"
"Oh, yeah. Ooooo. Aaaaah. That's how it starts.
Then, later, there's ...running. And....screaming."

curses. i crashed when i tried to come back up i was done.

Computer Art by Charles McChesney

Bobby,

You can have the Beta installed as well as Bryce7Pro - you just need to tell the installer to install to a new directory - when it says Bryce will be installed to C://ProgramFiles86/Daz3D/BryceRC2 - the BryceRC2 being the folder I had the last "Release Candidate 2" installed to - all you need to do is to hi-light "BryceRC2" and re-type it to say "Bryce7Pro" and the installer will both create a folder with that name and install to it...

But actually there's not a lot of point in having a run out Beta as well as Bryce7Pro - Me having loads of content - like millions of Materials and a wacking great gloop of Objects in the previous install I therefore let it install over the top of the RC2 - the installer kindly removes the basic content - like "Installed" and "User" "Complex FX" and simply replaces those with the same named content that comes with Bryce7Pro, so if there's new stuff in any of those folders (I think there's a tiny bit in one of them) then the new stuff gets installed.

I'm glad you've been able to come with us in upgrading to the next Bryce Bobby - I look forward to seeing what you produce with it.

Here's the last thing I did with the RC2: "Egg Rain"

Measure your mind's height
by the shade it casts.
Robert Browning (Paracelsus)

Fran's Freestuff

http://franontheedge.blogspot.com/

http://www.FranOnTheEdge.com

Quote - Bobby,

You can have the Beta installed as well as Bryce7Pro - 

As no one replied till your post I figgered it was a dumb query and just uninstalled the BETA

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

Just make sure you save your Presets whenever you can, I try to remember to do so often - and now I just copy the old Presets: Mats, Objects, Skies and Textures to all my Bryces - 7 - 6.3 and 5.5 so I always have access to them all in any version.

Sorry I didn't reply sooner but real life is a bit complex just now with Mum in hospital and us over the other side of the country and moving flats on Friday.

Measure your mind's height
by the shade it casts.
Robert Browning (Paracelsus)

Fran's Freestuff

http://franontheedge.blogspot.com/

http://www.FranOnTheEdge.com

 NP Fran...it was the correct thing to do and I am having fun exploring Bryce7Pro.. ...

 

Once in a while I look around,
I see a sound
and try to write it down
Sometimes they come out very soft
Tinkling light sound
The Sun comes up again

 

 

 

 

 

Quote - my nitemare.. esp when power shuts out here..which is like..ten times a day

If this is a major concern, especially if you're a professional, I would recommend getting a UPS (uninterruptible power supply) for your desktop and monitor.  If your power drops, the UPS will switch to battery for a certain period of time.  UPS' also do some degree of line conditioning, I think, to cope with flakey utility power.  How long the battery lasts depends on how much draw your desktop has.  A UPS won't be any good (besides the line conditioning) if your power outages last hours at a time.

I always use American Power Conversion (APC) units.

my two cents,

LH

i just let the beta go and got the pro for 30 which i thought was very reasonable. now if they would do something similar with carrara pro i'd be tickeled pink.

Computer Art by Charles McChesney

I think you better in Shrek green. ;-)

Available on Amazon for the Kindle E-Reader

All the Woes of a World by Jonathan Icknield aka The Bryster

And in my final hours - I would cling rather to the tattooed hand of kindness - than the unblemished hand of hate...