aldebaran40 opened this issue on Aug 30, 2014 · 23 posts
aldebaran40 posted Sat, 30 August 2014 at 9:59 AM
I'm working on a big history project with a partner (different continents), both work with Poser, and I've created a few characters (V4, v4 ++, m4 m4 ++, freak , m4-k4mixer and especially my custom Zbrush morph) and would be very helpful for us if I could send my finish models (fully functional ) so he can do his part of the work, is there any way to do that ???( I know the M4 and V4 are installed on their machine)
thanks in advance
ThunderStone posted Sat, 30 August 2014 at 3:06 PM
You neglected to say what version Poser you and your partner(s) have on your machine and also if it's win or mac and what version OS.
===========================================================
OS: Windows 11 64-bit
Poser: Poser 11.3 ...... Units: inches or meters depends on mood
Bryce: Bryce Pro 7.1.074
Image Editing: Corel Paintshop Pro
Renderer: Superfly, Firefly
9/11/2001: Never forget...
Smiles are contagious... Pass it on!
Today is the tomorrow you worried about yesterday
aldebaran40 posted Sat, 30 August 2014 at 3:19 PM
Quote - You neglected to say what version Poser you and your partner(s) have on your machine and also if it's win or mac and what version OS.
Apologies , Both Poser 2014 , OS. Win7
vilters posted Sat, 30 August 2014 at 7:04 PM
We can not answer this question.
The only place to get a legal answer is to ask this at DAZ.
Poser 1, 2, 3, 4, 5, 7,
P8 and PPro2010, P9 and PP2012, P10 and PP2014 Game
Dev
"Do not drive
faster then your angel can fly"!
ThunderStone posted Sat, 30 August 2014 at 7:14 PM
I don't know if this would help but try this. Under Scripts > Utility > collectSceneInventory might be helpful to you in some small way. Just follow the prompt. Maybe somebody else will jump in and give more helpful advice.
===========================================================
OS: Windows 11 64-bit
Poser: Poser 11.3 ...... Units: inches or meters depends on mood
Bryce: Bryce Pro 7.1.074
Image Editing: Corel Paintshop Pro
Renderer: Superfly, Firefly
9/11/2001: Never forget...
Smiles are contagious... Pass it on!
Today is the tomorrow you worried about yesterday
aldebaran40 posted Sat, 30 August 2014 at 9:38 PM
Quote - We can not answer this question.
The only place to get a legal answer is to ask this at DAZ.
I say that respectfully , If you read my question good , I am not looking for legal advice, I am looking advice for make (what I put above...) why I have to check with DAZ? if both have characters based purchased on your time and what's special about my models this done for me and to my knowledge, I think it belong to me
I do not know, if you want I reformulate the question:
I have a free model and I made the changes with Zbrush in it , now I want to send it to someone that he can use in your poser. anyone know how I can do that ? sending it the CR2 is sufficient? my morph are stored in that file? I can "pack" my full model ?
Come on, nobody ever ask that ? I think that is an interesting question
aldebaran40 posted Sat, 30 August 2014 at 9:42 PM
Quote - I don't know if this would help but try this. Under Scripts > Utility > collectSceneInventory might be helpful to you in some small way. Just follow the prompt. Maybe somebody else will jump in and give more helpful advice.
ok it's a start, I really I do not if it works but I'll try, and if it works, I will comment here, thanks for taking your time to answer me ThunderStone
RedPhantom posted Sat, 30 August 2014 at 9:46 PM Site Admin
If you both have the meshes, you can save any morphs you made in zbrush as pose files and send those legally. As far as someone else's mesh, that is a no-no
Available on Amazon for the Kindle E-Reader Monster of the North and The Shimmering Mage
Today I break my own personal record for the number of days for being alive.
Check out my store here or my free stuff here
I use Poser 13 and win 10
aldebaran40 posted Sun, 31 August 2014 at 9:10 AM
Quote - If you both have the meshes, you can save any morphs you made in zbrush as pose files and send those legally. As far as someone else's mesh, that is a no-no
Ok , thanks , yes , this can help me, my question now is how I can make these Pose files with MY custom morphs (my custom morphs are between 1 and 4 morph depending on the model)
come on, stop caring about what others will think, we are in the forum with people who know more Poser in the world and only a couple of short answers, it seems they are more concerned about the "what will they say" than in being members of a free community looking forward to to share knowledge
it is as if someone asked me how put bold text in word, and instead of telling "select text and touch the B" I answered "I can not answer you because IF your office is not legal you can not do it" , Just relax a little and enjoy the ride
aldebaran40 posted Sun, 31 August 2014 at 5:36 PM
Quote - I don't know if this would help but try this. Under Scripts > Utility > collectSceneInventory might be helpful to you in some small way. Just follow the prompt. Maybe somebody else will jump in and give more helpful advice.
I Try what you commented me and is very interesting what I got, a folder with a set of files that I think are all the elements of the scene, I did not know that function exist....
I wonder how these files would behave if I try to open them in another machine? , So I have to try....
thanks for the help,man
I'm still waiting for other ideas, but one at a time, please do not answer all together :)
ThunderStone posted Sun, 31 August 2014 at 6:19 PM
Glad I could help... I had a problem with one of my scene and had to do this to send it to the tech support. They went through it and it worked... You could try it on the same computer but use a different name to save the project.
===========================================================
OS: Windows 11 64-bit
Poser: Poser 11.3 ...... Units: inches or meters depends on mood
Bryce: Bryce Pro 7.1.074
Image Editing: Corel Paintshop Pro
Renderer: Superfly, Firefly
9/11/2001: Never forget...
Smiles are contagious... Pass it on!
Today is the tomorrow you worried about yesterday
modus0 posted Sun, 31 August 2014 at 7:47 PM
Quote - Come on, stop caring about what others will think, we are in the forum with people who know more Poser in the world and only a couple of short answers, it seems they are more concerned about the "what will they say" than in being members of a free community looking forward to to share knowledge
it is as if someone asked me how put bold text in word, and instead of telling "select text and touch the B" I answered "I can not answer you because IF your office is not legal you can not do it" , Just relax a little and enjoy the ride
To me, this kind of comment completely unnecessary. You asked how to do a specific thing, and people responded that it's not legal.
And we do have to care about what others think, because Renderosity cares what others think, and polices their forums. For example, posting links to warez sites, or suggesting someone use one will likely result in a banning, because it promotes illegal activity. And if Renderosity didn't work to prevent it, they would be seen as allowing it, and would not only lose vendors, but the US Government would likely shut them down.
People advised you that sending the mesh isn't legal because they don't want you do get yourself into trouble. Not for any other reason, so don't get pissy.
Now, as to your question, you could take the initiative yourself and do some searching, not only here, but also through Google, for "Creating morphs in Poser" to find what you're looking for instead.
It'd be a whole lot faster than waiting for someone do do it for you.
________________________________________________________________
If you're joking that's just cruel, but if you're being sarcastic, that's even worse.
aldebaran40 posted Sun, 31 August 2014 at 8:35 PM
Quote - To me, this kind of comment completely unnecessary. You asked how to do a specific thing, and people responded that it's not legal.
And we do have to care about what others think, because Renderosity cares what others think, and polices their forums. For example, posting links to warez sites, or suggesting someone use one will likely result in a banning, because it promotes illegal activity. And if Renderosity didn't work to prevent it, they would be seen as allowing it, and would not only lose vendors, but the US Government would likely shut them down.
People advised you that sending the mesh isn't legal because they don't want you do get yourself into trouble. Not for any other reason, so don't get pissy.
Now, as to your question, you could take the initiative yourself and do some searching, not only here, but also through Google, for "Creating morphs in Poser" to find what you're looking for instead.
It'd be a whole lot faster than waiting for someone do do it for you.
JAJAJAJAJAJAJAJAJAJAJAJAJA
search "Creating morphs in Poser" ??? , is this a joke?
WHY I have to find that, if I want to do something completament different ?
Seriously, you read what I want to do? please I have a question I want to know the valid answer, you walked here just to fight, do not even you read my original question
If you do not like the question, there is a cross at the top right of the browser , but PLEASE ,respects my question and do not spoil the thread with crap
ps."Creating morphs in Poser" ....You made me laugh....
aldebaran40 posted Sun, 31 August 2014 at 8:42 PM
Quote - Glad I could help... I had a problem with one of my scene and had to do this to send it to the tech support. They went through it and it worked... You could try it on the same computer but use a different name to save the project.
I'm probe open the scene in my pc (other name) and work Ok ThunderStone , this tip help me a lot, thank you , perhaps be a way to do the same but only with the character ,will continue to seek....
WandW posted Mon, 01 September 2014 at 8:33 AM
If your collaborator has the same assets, just save it as a cr2 and send that. You both have licenses to it...
----------------------------------------------------------------------------------------
The Wisdom of bagginsbill:
"Oh - the manual says that? I have never read the manual - this must be why."
aldebaran40 posted Mon, 01 September 2014 at 7:06 PM
Quote - If your collaborator has the same assets, just save it as a cr2 and send that. You both have licenses to it...
Yes , my partner has the same asset ( and of course the respective licence...) the most of this models are the basic m4 and v4, the big difference are in my zbrush morphs , and there's my big doubt , if I sent the cr2 , ¿ my Zbrush morphs will be included in the file?
Thanks in advance
WandW posted Mon, 01 September 2014 at 11:42 PM
Quote -
Yes , my partner has the same asset ( and of course the respective licence...) the most of this models are the basic m4 and v4, the big difference are in my zbrush morphs , and there's my big doubt , if I sent the cr2 , ¿ my Zbrush morphs will be included in the file?
If you have loaded the morph targets into the figure, they will be saved in the cr2...
----------------------------------------------------------------------------------------
The Wisdom of bagginsbill:
"Oh - the manual says that? I have never read the manual - this must be why."
aldebaran40 posted Tue, 02 September 2014 at 6:53 AM
Quote - If you have loaded the morph targets into the figure, they will be saved in the cr2...
Yes it load the morph into the figure , I'll try your advice, and the tip gave me thunderstone above and I tell you the result , thank you very very much for all your help WandW ,I really appreciate it
WandW posted Tue, 02 September 2014 at 8:24 AM
If you are going to email cr2s, be sure to compress them as they will be large attachments otherwise....
----------------------------------------------------------------------------------------
The Wisdom of bagginsbill:
"Oh - the manual says that? I have never read the manual - this must be why."
vilters posted Tue, 02 September 2014 at 9:54 AM
Second try: Only the legal owner of the figures can tell you "what is" or "is not alowed", and how to proceed.
Poser 1, 2, 3, 4, 5, 7,
P8 and PPro2010, P9 and PP2012, P10 and PP2014 Game
Dev
"Do not drive
faster then your angel can fly"!
WandW posted Tue, 02 September 2014 at 2:11 PM
That wasn't his question, Tony... 
----------------------------------------------------------------------------------------
The Wisdom of bagginsbill:
"Oh - the manual says that? I have never read the manual - this must be why."
aldebaran40 posted Wed, 03 September 2014 at 8:57 AM
Quote - If you are going to email cr2s, be sure to compress them as they will be large attachments otherwise....
ok thanks for the tip , one character would be no problem with the size , but multiples charactes weight significantly
aldebaran40 posted Fri, 19 September 2014 at 8:56 PM
thanks for all the tips Thunderstone and WandW , your advice worked perfectly, I can send everything smoothly