I am currently working on my Roxie Renewal project, similar to my project for Jessi 1.  This will be an extensive free set to add a large amount of functionality to Roxie.

Current categories:   Bend fixes. other fixes, Body shaping morphs, Head Shaping Morphs,  Age presets, Proportions, Ratios and Heights

Possible additional categories:  Skin and eye tinting settings, basic nail polishes, special effects skin settings, new basic skin for male and female, clothing adjustment magnets

NOT free - possibly releasing an encoded converted version of the Alyson2 bodysuit I have in the market . Roxie doesn't seem to have one, and I don't need to make a new bodysuit since I made a perfectly good one already for someone else.

If persons are interesting in helping out as testers or by making additional content for this set or supporting this set that would be appreciated.  I am not currently making any 'movie aliens', anthro animal morphs, or character morph/skin sets, so there is plenty of space for people to donate those.  I am making an age progression set using morphs and scaling running from baby , child, teen, adult and senior.  I haven't made any decisions about clothing sets, but the field is wide open on that. 

I do already have a male morph made, as well as settings for a scaled male morph when I get to the ratios/ scaling section of this project. I suppose that means Rox will need some male parts either custom made or stolen from some other fella.

Anyone interested in this project should send me a pm for contact info.  If there are 2 or more volunteers I will set up a project chat room for discussion of the technical aspects of the work and of specific sub projects

Since this forum has been .. well not exactly friendly .. recently I'm adding a disclaimer.

I am not going to make a profit off this project. I am not doing this for any reason but to improve a decent figure that hasn't had much attention and that a lot of people have already.  I don't care if you hate Roxie, I've already started and I aim to finish regardless of popular support.  If I get no volunteers, I don't much care, I can do this project on my own but it will be bigger and better if there is more content made by more people. I am posting this thread specifically for the small and quiet minority who actually use this figure, or who are interested in the technical aspects of this sort of base figure expansion and renovation. And if you don't know who I am and don't trust me, saying so in a public poser forum may get you laughed at. Use google.

Lyrra

Interesting. 

Eternal Hobbyist

 

I don't use Roxie and I really don't have any skills that would be able to assist.  So the only real support I can give is to wish you every success and I sincerely hope you get lots on volunteers.

What a shame we have reached the point that you have to add a disclaimer, but I fully understand why you did.

Thank you so much for supporting the community and showing that there are still people around to put this sort of effort in for the good of everyone.

 

 

I use Poser 13 on Windows 11 - For Scene set up I use a Geekcom A5 -  Ryzen 9 5900HX, with 64 gig ram and 3 TB  storage, mini PC with final rendering done on normal sized desktop using an AMD Ryzen Threadipper 1950X CPU, Corsair Hydro H100i CPU cooler, 3XS EVGA GTX 1080i SC with 11g Ram, 4 X 16gig Corsair DDR4 Ram and a Corsair RM 100 PSU .   The desktop is in a remote location with rendering done via Queue Manager which gives me a clearer desktop and quieter computer room.

 I told you in that other thread I was on board. I'll donate my Black Widow outfit for the cause. I just have to finish it.

I comes with boots and a gun belt too... 

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

rokket

Take your time. I'm still finalizing the full body, morphs and haven't touched the partials, the head morphs or the scaling stuff. I'm going to be a while at this.  Once I have the fbms set and installed in a carrier cr2 I can send that along for you to transfer the morphs into your suit and tidy up  if you'd like. I'm not sure what sort of joint corrections or JCM's will be needed for the morphs. Most of them haven't been too extreme yet, but the Heavy, Supertank and OlympicMuscle morphs are going to need JCMs on the shoulders and groin, so the clothing is pretty much guaranteed to have issues there too.

Oh and this is on the patched Roxie, with the lashes part of the geom.

Lyrra

 Oh, ok. No problems then. It might be easier for you to install the JCM's and whatnot. I have had Poser 10 for a week, and I just discovered today that I could tell it ahead of time which bones I wanted from the Donor rig. I haven't been able to do that until now. So I am still learning the program and reworking my workflow.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

yeah now you can pick and choose, just be careful. Any figure with a ghost pelvis sometimes gets weird.  I usually just copy the whole rig and use PFE to snip out the bones I dont need, or use an already tidied up donor rig.  That also gives me a chance to strip out those pesky joint deformers and morphs that get carried over.

Lyrra

 I've noticed one thing about ghost bones, and maybe it was just me, but if I don't group the mesh going in to the setup room and apply the donor rig with the ghost bones and auto group the mesh when I apply the rig, they are not ghost bones on the new mesh. If you take them out, you get the polys not grouped to a bone error when you exit the setup room.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

Some WIP renders of a couple of the morphs.  I'm not quite happy with Olympic Muscle yet

Voluptuous

Sporty Front

Sporty back

Little issue with the autocreated morph there on the bikini

Thin

try that again ... thin

and olympic muscle front

and Olympic muscle back

The skin is the stock Roxie skin, with EZSKIN2 settings and the bikini is the stock one which I auto transferred morphs to.

I'm not entirely happy with Olympic Muscle yet as I stated, but possibly once I have made a separate Definition morph or displacement the combination will have slightly sharper definition. Muscle morphs aren't my specialty, so if someone else can do better by all means go for it.

The range of morphs I have are based off the shapes established by various other figures which are popular. All are of course hand sculpted by me using magnets and Poser's morph brush tools.

I've made a bunch of partial body morphs, including the usual range of chest shapes (which everyone loves so much). I'm not going to post pictures of all of those :P

I did a brief experiment with Rex's genitals figure and they conform nicely, so I'll be adding a morph set for those to fit to the roxy male shape and the other morphs as needed.

I think one or two morphs shown here have the legs elongated to 110% on Y for thigh and shin, which makes the body proportions more heroic than average. V4 has heroic proportions. The poser figures tend towards human averages.  I'll be including a 'heroic' proportion in the scaling options dials.

Tomorrow is back to real work .. finishing the proofing on the print copy of my book on Poser and hopefully getting the edits back to Amazon. Exciting stuff :)

Lyrra

 Really nice work. I agree with you on the muscles. But the other morphs are looking really nice. My Black Widow suit is based off her base, but I am assuming these morphs should be able to be injected into it..

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

rokket

Oh yeah, you can either hand sculpt or as I prefer to do these days, use poser to transfer the morphs and the morph brushes to smooth and tighten up as needed. Or you could make them in your modeler, or zbrush, or with a utility ..... but posers tool is fast and right there.  Takes a lot of the hassles out :)   The sporty morph should look very nice with the bodysuit mesh you showed in the other thread.

Part of the trouble with the muscles is the density of the mesh. I'm going to try tinkering with that one more but...  its tough getting a sharp cut on those abs

Lyrra

Very nice looking Lyrra!

I dunno .. face too creepy? an attempt at an anime type style body and head. Head scaled up a titch, and legs scaled to 115 on Y

The face is too round. In my limited anime experience, the face is more triangle shaped. Sometimes she has pronounced cheekbones but the chin always seems to come to a point.

Now, that I finished with an outfit I was making for Ryan, I can help with with the renewal project. I've got a few outfits I'm making for her. I can make other things for her too. I'm still a new when it comes to making content so I'm not fast. But I'll help as I can.

---

Available on Amazon for the Kindle E-Reader Monster of the North and The Shimmering Mage

Today I break my own personal record for the number of days for being alive.
Check out my store here or my free stuff here
I use Poser 13 and win 10

does anyone know of a content listing for roxie out there?  I think that might help so we don't remake something by accident.

Oh wait .. I found one. ok  guys .. here is a list of the free stuff out there already.  So now is a good time to call dibs if there is anything specific you feel like making

https://poserdazfreebies.orain.org/wiki/Roxie

Theres a wild variety of anime styles ... from the super stylized heads to the semi real styles. Ideally I'd like something like aiko3, I think shes the cutest of the anime figures made for poser so far, but I'm not sure I can bash Roxie into that shape.  It might be better to do a poptop and steal somebody elses head (as ghoulish as that sounds) or a separate cr2 with a whole new head geometry (but then you have map matching issues).

In other news I've moved all the FBMs into the main dev figure except Olympic muscle, which I'm still messing with, and Sporty which is doing something odd on the hips that I want to sort out first.

So what are your Must Have morphs for any figure? your favorite V4/Aiko/whomever shapes ?  I'm already about 50 morphs into this mad project, so I might as well keep going. Which reminds me .. I need to add in the classic Spandex morphs. Always handy to have.  Does anyone have opinions about navel morphs, foot-for-shoe and all those aureloae/nipple morphs? I cant say that I've ever used any of them with any figure. Are they needed by anybody?

Lyrra

added a not very sexy render of one of the other shapes I think is about done.  Nudity tag for boring clay render of a not clothed person. in case anyone cares.

 Oh , don't add that one!

Kidding.

I am going to take a gander at that list you posted and see what's going on.

My suit will be ready for release in the next day or so. So do I put in in the freestuff or do you want to upload it somewhere? 

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

rokket

you can put it in the freestuff and then do an addon or update if you decide to add morph support to it. I'm going to be a little while longer, as you might have guessed

Theres really not all that much support for roxie out there right now.

Lyrra

I saw that when I looked. I even have 3 of those things that were listed.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

tinkering with Olympic Muscle some more. Better? the trick seems to be turning up the subdivision before morphing

I am still wondering if I have this sub D in Poser 10, or if it's just in the pro version. I don't think a lot of things are in this version that are in the pro.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

good question. To check: Load a figure like Roxie in, select Body, then in the properties panel look for "Subdivision levels". I only brought it up to 1.

Ok. I will check that out later.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

Wow these look great, might actually have to install my Roxie content. Can I just ask for the morph of the larger lady will there be a way to make the arms bigger? So a person could show the er... "batwings" that you tend to get when you're somewhat larger?

thats actually not even the Heavy morph. that was Pear-Shaped I think. I already have arm and leg size morphs and I will be adding scaling controls for that as well. So if this morph isn't exactly what you need you can modify it further.

Heres a very boring render of clay colored Roxy and the Heavy morph I'm working on

Lyrra

This so called site overhaul is throwing my game off. I need to stay offline for a day and get my suit packaged up.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

Never mind packaging it up.

I have decided to put it away for awhile and concentrate on other things. I get too wrapped up in my work and it drives me bonkers. So I will chill for a bit.

What's driving me nuts right now is trying to keep the emitters from deforming when they bend with the suit. It's almost as if they tear up when she moves her arm, for instance.

I might just put this up as a dynamic cloth suit and if no one wants it, so be it.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

The emitters can deform quite a bit without causing render problems; remember, they aren't supposed to be seen anyway. Their illumination effect is seen, but not the emitter mesh itself. It may be that parts are outside the falloff zone and thus aren't moving with the pose, however.

If the emitter array is crumpling because of the low-poly geometry, you could subdivide it, but I think the lighter weight geometry is more advantageous (quicker rendering, less memory consumption). Another possibility would be to leave the emitter array as a dynamic prop; pose the doll and conforming suit, then run a dyn sim for the emitter.

A caveat for unseen emitters in general: they will show in reflections, or if viewed from behind a refractive surface. Avoid those situations.

Poser 12, in feet.  

OSes:  Win7Prox64, Win7Ultx64

Silo Pro 2.5.6 64bit, Vue Infinite 2014.7, Genetica 4.0 Studio, UV Mapper Pro, UV Layout Pro, PhotoImpact X3, GIF Animator 5

I think I misspoke. It's not the emitters that are giving me fits. It's the parts they are supposed to be lighting up. The original geometry you created the emitters for. That part is crumpling. And yeah, I am going to take the suit back into Wings and see if I can get away with subdividing it without creating a 200k poly monster.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

Ah, OK, the visible neon strips are deforming; yes that should be avoided. Perhaps select the neon strips, make them a separate object in the modeler, and subdivide them? Maybe better, if you could select the edges running parallel with the limb/torso, and cut those edges,increasing the poly density along that long axis, making the neon strips more foldable, at lesser cost in polygon increase?

The neon doesn't need to be welded to the main fabric for a conforming figure, nor does it need to be welded for dynamic use if you assign everything to "constrained" (not "dynamic"). By the way, the demo image I made used the suit as dynamic, with all vertices/polys put in the constrained group, same for the emitter, and it seemed to work just fine.

Poser 12, in feet.  

OSes:  Win7Prox64, Win7Ultx64

Silo Pro 2.5.6 64bit, Vue Infinite 2014.7, Genetica 4.0 Studio, UV Mapper Pro, UV Layout Pro, PhotoImpact X3, GIF Animator 5

My first thought is to leave it as a dynamic cloth. But a lot of people don't want to/don't know how to/ can't use dynamic cloth.
You know what? I am going to put it out as dynamic. Works so much better that way.
Thanks for talking me into it!

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

crumpling often means the joint zones or wm need to be adjusted. Sometimes it needs an adjustment of the grouping as well. Shoulders and groin are especially finicky I have found.

I can look at making a conforming version of the suit when I have two minutes free.

seachnasaigh

the light emitters are actual geometry hanging about? so for a conformer they would be treated kind of like body handles. separate group and matzone and mostly ignored?

Lyrra

The emitter system must have it own "properties" options, which means it needs to be a separate conforming figure, or a separate dynamic prop, or maybe it could be uniquely named body parts of the suit figure.
In any case, it is critical that the emitter has the "visible in camera" box un-ticked.

Because only the effect of the emitter is seen (the illumination) but not the emitter itself, it's usually OK if it crumples in poses.

The material zone is important, and if the visible neon used an image map, then the emitter would need to be mapped to closely mimic those UVs. In this case, with the visible neon using a simple color, the emitter mapping isn't important - but the material is important; it must be hyper-ambient and match the color of the visible neon.

Poser 12, in feet.  

OSes:  Win7Prox64, Win7Ultx64

Silo Pro 2.5.6 64bit, Vue Infinite 2014.7, Genetica 4.0 Studio, UV Mapper Pro, UV Layout Pro, PhotoImpact X3, GIF Animator 5

I'll try to finish messing with the suit in a day or so and put it in the freestuff. I'll post here when it's up there and you can go get it and rig it if you want to. I am done with it as far as I'm concerned.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

Hi

Just popped in to say that I've been using Jessi Improved for a long time.
Practically the only female figure I use.

Thanks for putting in all this work.

I'll be looking forward to the new Roxie!

Mike

If you shoot a mime, do you need a silencer?

Hi Mike! Glad to hear someone liked that project. I always thought jessi 1 had a nice shape, but oh the bends were baaaad. A little TLC, some new morphs, loads of fix morphs and tada .. a perfectly nice figure. So yeah I'm doing the same thing for Roxie, but more, since I know even more tricks now. Nerd showed me the magic of using animated joint centers and the dependency editor to attach rigging changes to morphs so I can add all sorts of lovely scaling options like I had in my commercial Shape of Dawn project.

Right now I'm grinding my way through the mess of dials I made using Roxie's face room dials. I'm cleaning up and naming them as best as I can. Once I get these sorted out and useable, I can fill in whatever morphs are missing. Like every elf ear morph ever.

Heres a couple WIP renders of the new and improved Roxie ... showing off some of the head morphs, and the full body with the Sporty morph I showed earlier in the thread. Looks like a whole new figure already :) Default skin, with one of the makeup option. Default scaling and ratios

Lyrra
(the Ex-Evil Overlord)

and for comparison .. the same scene but with all the new morphs turned off.

Roxie's hair is an Alyson refit, isn't it?

That's what she really needs. Hair and some poses.

When I got into this, it was with Poser 8. When I upgraded to Poser 9, Miki 4 and Tyler were the new kids on the block. Not much for clothing, no hair for Tyler, and no poses for either one of them.
Now with Poser 10, same deal with Rex and Roxie. Is that the standard? They implement a new figure, but no included support? Was it that way when they introduced Simon and Sydney? Or James and Jessi?
Just trying to keep up.

Oh, and Lyrra, that morph combination is really nice. But I noticed something going on with her abdomen in the morphs render. Something poking through?

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

Where do I get the Jessi improved that Mike was talking about? Is this something that is long gone?

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

The hair in that picture is the one hair that came in the tin .. might be an Alyson refit, I don't actually know. Stock hair, stock pose, stock clothing. The pokethrough is caused by using the auto transfer of morphs onto the leotard and not adjusting afterwards (i e lazy Lyrra) When I finalize the morphs then I'll go back and fit all the stock clothing proper like. For now I'm just slapping the bikini and leotard on to avoid the nudity tags.

The poser makers tend to have a bad habit of making just the bare bones for each new figure they make and hoping somebody else fills in the gaps. Unfortunately since DAZ's ascendancy with Victoria 1 that hasn't happened so much.

However, since the new Poser product manager keeps saying 'Content is King' I have higher hopes for the new round with the upcoming Poser 11, but we shall see.

Jessi 1 is a project I made a few years back , you can snag it over at ShareCG. I took the Jessi 1 Hi Res figure, made all the bend fixes she desperately needed, and then kept on going. The cr2 loads with all my morphs in it, the head fixes on, and shiny new skin surface settings courtesy of EZSkin with SnarlyGribbly's permission.

http://www.sharecg.com/v/73646/view/11/Poser/Jessi-1-Improved

I suppose if someone wanted to make hair refit poses that would be a nice addition to this project. I know there are people viewing this thread and not commenting... so if anyone wants to make hair refits or poses feel free to PM me if you are shy :)

Lyrra

Ah, I see. Quick renders after the morphs are made just to check them.

I hope someone will do hair refits. I made 3 of them for Miki 4 when I first got Poser 9, but they are no picnic for me. And they were far from perfect. I won't be trying it again, but I hope someone with skills and patience will do it.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

Rokket

I just started a request thread .. we'll see if anyone volunteers. https://www.renderosity.com/mod/forumpro/?thread_id=2893289

Lyrra

I saw that. Let's hope that if they don't post there, someone at least PM's you.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

I'm not sure how much I want to rely on the site mail here right now .. my inbox is showing all received messages as having just been received at the moment I load the page, even the one from 2 years ago. Its a wee bit busted lol

I can be reached at gmail using my name with no spaces @ gmail if anyone IS trying to reach me

Lyrra Madril

Slooowly progressing. Down to cleanup on the last few faceroom generated morphs and then I need to go back and sort and fill in for completeness. I think the male one has some promise .. shown here with the male body morph as well

Lyrra

That male morph looks interesting, but wouldn't look good in this dress. Ignore the face mask and light saber. Those were just added on for the heck of it. The color will change for this thing too, once I get it mapped. It will be dynamic.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

... because everything looks better with a lightsabre

If the dress went up to a scoop or keyhole collar it would be a perfectly normal tunic type of thing, good for all genders. As it is I'm surprised it didn't slide off her shoulders .. dynamics with low necklines can be tricky :)

Lyrra

I half expected it to slide off too, there are no constrained groups in there. I guess what you can't see is that the hole isn't as large in the neck as it appears. There is a transmap in there to create the lace around the neckline. Maybe that's what kept it from falling off her shoulders, I don't know. Probably a combination of that and the pose kept it in place.
I won't remodel to make it a unisex thing. I made this a long time ago for Sydney. I just scaled it to fit her and ran the simulation.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

On the other hand, this mask is starting to grow on me...

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

I'm filling out the head morphs now .. needs some more mouth and eye morphs. Slowly getting there. I've done an anime nose and ear morph, simplified and smoothed. they look fairly decent I think. Does anyone who loves anime want to make eye and eyelash textures? that should really help with the overall look.

I have free time right this second as I wait for my book to come out on Amazon . The kindle copy is up already :)

Lyrra

Rather than stare at the sales pages for my book I'm working on Roxie. lol

I think I'm done with most of the work on the geometry morphs. Now I'm starting in on the scaling stuff. I have the basics done, I still need to do the heights, ages and supertank.

Attaching some dial spins of differrent character possible with what I have made so far, using various morphs and the scaling dials I've made so far.

Stock Roxie - the default shape, height, etc etc

spin 1

Spin 2

Spin 3

Lyrra Madril

I am playing with a new outfit for her. It's got some issues, but I think it will be really nice when its finished...

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

 Lyrra, I have some Roxie (and Rex) stuff;  are you wanting posts/links for any Roxie content?

Poser 12, in feet.  

OSes:  Win7Prox64, Win7Ultx64

Silo Pro 2.5.6 64bit, Vue Infinite 2014.7, Genetica 4.0 Studio, UV Mapper Pro, UV Layout Pro, PhotoImpact X3, GIF Animator 5

seachnasaigh

I figures once the project is ready to live I'd start a Roxie Content Thread unless someone beat me to it :) I've been a little busy getting my book set up at various shops .. distracting. I have a couple more things to finish making on Roxie, and then I need beta volunteers.

You can list your stuff here too if you want.

Lyrra

for the curious .. I have used the Universal Sizing Apparatus to find out how tall Roxie is, so I can make height dials.

Measurements as far as I could manage it (not 100% exact) 5 foot 3 inches tall, and 30B bra size. According to Amazon' chart she wears a size small jeans, approximately a size 4 (US)

LM

too creepy?

Lyrra

Make the eyes bigger, and no.

Mini-Me?

Lyrra posted at 6:50AM Wed, 09 September 2015 - #4227235

for the curious .. I have used the Universal Sizing Apparatus to find out how tall Roxie is, so I can make height dials.

Measurements as far as I could manage it (not 100% exact) 5 foot 3 inches tall, and 30B bra size. According to Amazon' chart she wears a size small jeans, approximately a size 4 (US)

LM

Yeah, you stand her next to Miki 4 and they look to be about the same height. But Miki has a much, how would I phrase this?... curvy body. I like Roxie's look. There is a lot that can be done with her, and when you are done, there will be a lot more.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

Dale B posted at 6:52AM Wed, 09 September 2015 - #4227281

Make the eyes bigger, and no.

Agreed.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

hborre posted at 6:52AM Wed, 09 September 2015 - #4227307

Mini-Me?

LOL!!!!!!!

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

well I need to go back and add some trans to the eyeballs for a few head morphs .. but I think I'm mainly done building morphs. Ok who wants to get a shiny new Roxie cr2 loaded with morphs to test? message me your email so I can send you a link.

This is the test phase, open to anyone who has Roxie - clothing makers and users, so the morphs can be checked and people can ask for anything that I have missed.

After the test phase will be the Alpha release phase for clothing makers, while I go and add fits for all my morphs to the stock Roxie clothes, my converted Aly2 bodysuit, and requested free third party clothes and continue making hair fits.

And then the last phase is the actual release thread and content listing of roxie stuff.

The last morph I posted was the Baby morph. It has one master dial that controls the Height dial, Baby Head, Baby Body, and a bunch of other scaling morphs. And yes you can dial and undial it and watch Roxie go from a baby to an adult. Its kind of neat.

so. Volunteers anyone?

Lyrra

Site mail sent!!!!

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

I've gone through all the body morphs and about half of the head morphs, and so far so good. I will mess with the rest of the face morphs and the rest tomorrow. Nice job so far. I can already tell there are a few of them I will be using a lot.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

Heading into the final stages!

or in other words .. I'm making some promo images. This should hopefully only take a day or so and then I'll be starting a new thread.

I'm going to be asking for links to Roxie content then, so now is a good time to get your link lists together if you want to contribute :)

Heres a teaser promo

Roxie Improved - anime body smoothed, eyes large, iris huge, ears anime, nose anime, headscale A3 xin xin hair refitted by me, RI morphs in stock Roxie clothing (skirt has a satin shader added). Aiko4 base skin, converted via TextureTransformer, Animeyes ditto. EZskin2 shaders, uhhhh from a thread on RDNA I believe.

Lyrra

Wow, that doesn't even look like the original!

I can't wait for this one to come out.... I really enjoyed the beta test. I didn't keep her in my runtime, though. I am waiting for your release.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

one more teaser and then off to bed. Tomorrow is packing day finally! yay! packing the thing, promos, readme ... all that fun stuff.

and

thats v4's ariana skin converted to Roxie with EZskin shaders, Cheongsam shoes, the stock bikini , a hat from the mess I call my runtime.. Roxie improved with Sporty FBM, legs length, arms length, a little torso length, and neck length and face morphs.

The closeup is Reciecup's Pandora converted over to Roxie, ezskin shaders, frizz hair, and one of the head morphs I spawned from the FaceRoom and cleaned up, and the Valkyrie bodyshape. Custom morphs on the stock tank top for fit and to drop the strap down.

Lyrra

you know if someone wants to make some new textures for the stock items that would be great. I had to get creative to put together outfits for promos lol

https://www.renderosity.com/mod/forumpro/?thread_id=2894334

Amazing work.

If I had a nickle for ever time a woman told me to get lost, I could buy Manhattan.

OK, just loaded it and installed. Works like a breeze!

Thank you Lyrra!

glad to hear it works ... now show me pictures :)

Lyrra

Well, meet Roxus

and Bertha

oh drat .. I clean forgot about Rox's tackle.

You can load and conform Rex's bits to Roxie, but you will need to make a little morph to refit it a bit and smooth the transition. Then transfer over RI's morphs and you should be set

Lyrra

Have no fear. Roxus was well provided.

Thanks Lyrra! Roxie looks amazing! Thank you for providing the clothes .cr2s as well and thanks FVerbaas for the great dynamic clothing. :) I'm now working on fitting some other clothing to her but here's a first look. Btw, you mentioned converting V4 textures to Roxie. Would that be with Blacksmith's utility?

Well done Kalypso!

Kalypso, She looks great :)

Yes I used Texture Transformer, which apparently I bought eons ago to convert texture to Dawn. Hadn't realized it did Roxie as well, that was a pleasant surprise. Its cumbersome though, so I've been converting my v4's a letter at a time and no makeups. I'm still on the A's lol

I am kind of curious to see what peoples favorite morphs are of the lot .... I am guessing Sporty will be the most popular. It was influenced by GND V4, Alice and Elite Utopian, since I see a lot of that morph in the gallery.

Lyrra

Thank you FVerbaas and Lyrra! I had Reality Paint v5 before it became Blacksmith 3D again. When I bought it Texture Transformer came included with it and I had used for Dawn but never noticed Roxie since I didn't have her then. After updating it I was able to use it and also got a V4 to G2 module and even M4 to Dusk so that's cool!

You're going by alphabetical order? Wow, must be very patient. :)

I like using morphs in conjuction with each other in small increments rather than just choosing one. With all that we have for Roxie now you can get lots of varied looks. Here's my first texture transformation - I used Maddelirium's Sugar and Spice and but yeah, doing all the makeups is a task so I'll probably just end up picking my favourite one.

Oh and in this image she's wearing leggings from Poserworld but I wanted to just pick and assign a material to her legs with the grouping tool and I ran into a snag. I'm not going to derail the thread but if anyone could take a look here and has the time to try it and let me know if it's just me I'd appreciate it. Material grouping glitch