Garden Gate and Estate Fence by richardandtracy
Softwares: DAZ Studio 4 With IRAY
License: This is licensed for commercial or non-commercial use.
Product Notes
This is a little model I have been thinking about for a while, and it came together rather more quickly than I was expecting.
So, it's a little, fairly posh, garden gate with rigged hinge and latch. The gate posts go to 30cm below ground level to accommodate slopes. The colours of black and gold are the only colours possible for a moderately ostentatious gate of this type. The gate is just missing a garden. Over to you, then...
The gate defaults to 115.5cm across the post width, and the posts extend to 120cm in height. The width can reasonably scale from 80% to 130% while still looking in proportion.
The fence section is similar to an Estate Fence from a wealthy estate of the 1800's in England.
On-Sale Items in the Marketplace
Freestuff Comments
richardandtracy 3:46AM | Mon, 04 November 2024
I'm glad you like them. It seems a small thing to do to say 'Thank You' for all the help I've received over the years from other people. : Using Google Translate as I don't have enough German: Ich freue mich, dass sie Ihnen gefallen. Es scheint mir eine Kleinigkeit zu sein, „Danke“ zu sagen für all die Hilfe, die ich im Laufe der Jahre von anderen Menschen erhalten habe.
Lurchy1 6:17PM | Sat, 02 November 2024
An dieser Stelle möchte ich mich recht herzlich für die Free-Modelle bedanken! Viele Liebe Grüße Lurchy1. At this point I would like to thank you very much for the free models! Kind regards, Lurchy1.
richardandtracy 9:26AM | Sat, 20 August 2022
I hope to get a sideway gate (1.9m high) done soonish (a couple of weeks, maybe). The gate is modelled, but I'm having difficulty with a decorative cast plaque to go on the front. Once I have got that done it shouldn't be too long before I release the gate.
robertswww 9:19AM | Sat, 20 August 2022
Very nice looking metal fence and gate that will add some character to those upscale neighborhood scenes... thank you!
richardandtracy 4:05AM | Mon, 15 August 2022
The 'Slope' morph for the fence panel is at 100mm (approx 4") at 100% strength. If you need more than +/- 400% (400mm/approx 16"), then the bars will start to look distorted, which is why I've put in those limits. The support bar angle can be changed by clicking the appropriate bar and moving the 'Support Angle' slider.
richardandtracy 3:34AM | Mon, 15 August 2022
One or two extra details: To get the fence piece to match up with the gatepost on the right of the gate, translate the fence 102.3cm in X and switch property 'Hide Support 1' to 'On'. To get the fence piece to match up with the gatepost on the left of the gate, translate the fence -210.3cm in X and switch property 'Hide Support 2' to 'On'. If you use my Linear Array Script to duplicate the fence, switch one or other 'Hide Support' switch to 'On' and set the instance spacing to 180cm, then there will be a support every 180cm as occurs in the real article.
Privacy Notice
This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.