Sun, Sep 22, 9:28 PM CDT

Coming Back To Life - Mortem Vetus Forthcoming Pre

MarketPlace Showcase Fantasy posted on Oct 09, 2018
Open full image in new tab Zoom on image
Close

Hover over top left image to zoom.
Click anywhere to exit.


Members remain the original copyright holder in all their materials here at Renderosity. Use of any of their material inconsistent with the terms and conditions set forth is prohibited and is considered an infringement of the copyrights of the respective holders unless specially stated otherwise.

Description


Apologies in advance, this may be rather long. Actually, there's no 'may' about it, it's going to be long, heh. As many of you will be aware, we've been rather quiet when it comes to getting content out for the best part of 3 years now, since the sad demise of RuntimeDNA. This has been due to a combination of circumstances, none of which need going into here, because it would probably just sound like whinging and moaning. which is not our style. Suffice to say, 'shit happens', sometimes more than others. That's the way it goes, and all anyone can do is try to make the best of it, or at least survive. However, after every night comes a new dawn, and the glimmers of that new dawn have been getting stronger just recently. Yes, this night has been very long, and very dark, but as is inevitable, nothing lasts forever. Since our new day is about to dawn, we feel it would be a good time to let you all know what's happening. As well as taking the opportunity to thank you all for your support and belief. You guys rock, and make this all worth doing. So let's get to the good stuff, which is all the fun things that everyone will soon have opportunity to render. This is a selection of the outfits that we've created during the long dark night, which for a variety of reasons never made it to the finishing line. There are quite a few more actually, but these are the furthest progressed so will be the first out of the door. As you can see they're all rigged, and they have all their morphs done. Basically, all these outfits just need finalising and they'll be along. So without further ado, let's have a quick run through them one by one. :) Fenrir. This is one of the largest of the sets that we're finishing up, with 14 layered clothing cr2's, plus an additional 7 props. Of all these outfits, this is the most recent and we've really pushed ourselves on it. It's probably the outfit we're most excited about finishing up, because it's one of the most complex sets we've ever made. Woodsman. This is the longest to get there of all these outfits, and will be the first to see the light of day, or rather the light of our new dawn. This one comes with 6 clothing cr2's plus 19(!) props and a whole heap of texture options across all the clothing figures. Best of all, it's going into freestuff. A little thank you to you all for all the years of support. Saracen. This one we've wanted to do since we did the Templar, which would be some time ago now. 8 clothing cr2's plus 2 smart props. It may still get one more clothing figure as an extra option. Or possibly two. Looking forward to lots of rendering fun with this. Ringmaster. This one was intended to try and keep the notorious Stan in check. Heh, good luck with that, because you can't keep a good (read, evil) clown down. Comparatively simple with just 8 clothing cr2's. However, the whips (left and right) as well as conforming to M4's hand also utilise EZPose for great poseability. Peasant. Because we make a lot of art set in a feudal/medieval/fantasy -esque setting, you've got to have peasants. A simple set, with just 5 clothing cr2's, this will likely be the first of a few serfs and peasants who'll be inhabiting our fantasy world. Wizard. We both love doing fantasy art, and of course that requires a Wizard to join all the other character classes we already have. (warriors, Necromancer, Rogue, Hunter, Priest we already have). 7 clothing cr2's plus at least 2 smart props. ??? ....? Woodsman, Peasant and Wizard have already made appearances in our own art because we just couldn't resist. As we've always done, we create this stuff first and foremost for use in our own art, so once things can be used, they will be used. Even if we have to make small allowances for things that aren't quite finished. In addition to all the clothing, we're also have characters, props, hair, props with lights. Basically a lot of the stuff that we love making art with. Again, a really huge thank you to everyone who supports us, and especially to the good folks on the Renderosity staff, who have been very patient with us, as well as making us feel right at home. You've all been super fantastic and we are so thank ful to be surrounded by such great artists who are also really wonderful people. Each and every one of you rock! The Woodsman will be in the next few days. We have 1 prop to texture and 3 thumbs to make, then you'll all be able to go grab it. As always, Happy Rendering Best wishes Andrew and Tracey :)

Comments (4)


)

crender

11:30PM | Tue, 09 October 2018

Gorgeous image, outstanding work! 😍

)

KageRyu

12:39PM | Wed, 10 October 2018

I remember some of these being discussed way back - and I understand. I have missed not seeing much new compatible for Poser from You and the other RDNA members, and I am glad to see some of these are coming yet. I look forward to them. I still make use of a lot of your other sets, both as intended, and in kitbashes for various projects. I always liked your characters and costumes. I am glad to see you here.

MortemVetus

2:14PM | Wed, 10 October 2018

Heya Mark, good to see you're still about mate, because we've been out of the loop for some time now. As we said in the write up to this image, a combination of circumstances really knocked us for six. But we had to let our creativity out, or I think we would have burst.

You're quite right, a couple of these were indeed first previewd at RuntimeDNA, so they've been a long time coming. That said, we are both recently feeling re-invigorated and we've got a lot of wated time to make up for.

As for software of choice, it's Poser all the way for us, like yourself, and indeed many others. Drop us a line amigo, let's talk. We can see if between the remaining DNA peeps, we can continue the ethos of DNA, which was always about being different. Sadly, Eric and Syyd both seem to have disappeared into the ether, which is a terrible shame, 3d has lost two of the most original, innovate imaginations you could imagine. And the 3d world is poorer for it we feel.

Take care my friend, and yes, let's talk man.....there are whole worlds of imagination to explore yet. ;)

Best wishes, Andrew and Tracey.

)

goldie

8:04PM | Wed, 10 October 2018

On the edge of my seat waiting for these 😁 They look wonderful...Yes, the closing of RDNA was a sad day. Also, the mad rush of everyone to DS and the abandonment of Poser saddens me. In my estimation, Poser really is a better program. Anyway, do look forward to your new fares. Do hope they will be compatible with Superfly 😁

MortemVetus

2:59AM | Thu, 11 October 2018

Thank you goldie. As the title says, we are coming back to life. And looking at the image, we've realised there are several outfits that didn't make it on there, and that's before we start with all the other stuff we have that's not got released, among other things, a pile of characters, props, hair, lighting. Over the coming months, it will probably seem like we're going really fast but many of these things are essentially done and just need that final push over the line.

As for superfly, the majority of our stuff does actually work in Superfly, in the same way it works in iRay. We always try not to over-complicate the issue, and we generally avoid massive node arrangements. We don't feel our stuff suffers for not having them, and by doing that, it all seems to work across the board in Firefly, Superfdly, 3Delight and iRay.

We did try DS for a while, mainly to help Eric out with making sure there was some fun and funky stuff for TerraDome3, and we pulled off some pretty cool morphs for it, plus of course TerraLuna, which we've done for all three versions of TerraDome. However, we had to conclude that DS was not for us, in any way, and because of entirely different attitudes to DNA, neither was Daz, so we walked away.

At the end of the day, Poser is our software of choice, because the results we get are the best for the artwork we make. And the art has always been the main criteria for us. Sure, it's nice to sell stuff, but if we were chasing dollars, we'd be making lingerie for Genesis 8 or whatever they're on now. But I'm not about to engage in DS bashing....at the end of the day, everyone should be able to use the software that they prefer or that most suits what they're trying to do. For us, that's Poser, all the way.

The Woodsman will be out in the next few days, we're just waiting to hear if we're allowed to put it in Rosity freestuff, or whether we'll have to do it via our site (which is all freestuff). Either way, it will signal the end of winter for us.

Best wishes, Andrew and Tracey. :)

)

RAGraphicDesign

9:35AM | Sat, 03 November 2018

Finally stuff for Poser ! I would like to realize some add-ons on some of your clothes (M4) so my RA Plebeian V4 will have a worthy partner...:)


1 57 4

00
Days
:
02
Hrs
:
31
Mins
:
50
Secs
Premier Release Product
dforce - Sparkle Fairy - G8
3D Models
Top-Selling Vendor Sale Item
$12.95 USD 40% Off
$7.77 USD

Privacy Notice

This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.