Description
After a STEAMPUNK BUS, figment of my imagination, I come back with a realistic vintage model, like I used to do. To tell the truth, I had never heard of this model before seeing one for sale in the south of France last year. It was a new challenge due to the lack of blueprints and particularly strange shapes, far more difficult to create than I thought. This could explain why this 3D model is not yet available on the web. I will therefore remedy this shortcoming since I will propose soon this model for both Poser and DAZ Studio in 3DClassics store at Renderosity.
History of this vehicle according to Wikipedia :
The Jeepster is an automobile originally produced by Willys-Overland Motors from 1948 until 1950. It was developed to fill a gap in the company's product line, crossing over from their "utilitarian" proto SUVs and trucks to the passenger automobile market.The Jeepster initially included numerous deluxe features and interior fittings in addition to a high level of standard equipment that cost extra on other automobiles.
After World War II, Jeep trademark owner, Willys began producing and marketing the "CJ" (for Civilian Jeep) to farmers, foresters, and others with similar utilitarian needs. The company also began producing the Jeep Wagon/Panel Utility/Pick-up in 1946, and the Jeep Truck in 1947.
Seeing a gap in their product lineup, Willys developed the Jeepster to crossover from their "utilitarian" trucks to the passenger automobile market. It was to expand its Jeep work truck focus and thus broaden Willys' customer base. The new sporty rear-wheel-drive-only model was to have a "dual personality for city and country driving" and marketing emphasized it as "America's greatest value in sports cars!"
Willys-Overland lacked the machinery to form deep-drawn fenders or complicated shapes, so the vehicle had to use a simple and slab-sided design. Industrial designer Brooks Stevens styled a line of postwar vehicles for Willys using a common platform that included the Jeep pickup and station wagon, as well as a sporty two-door open car that he envisioned as a sports car for veterans of World War II.
The Willys-Overland Jeepster ("VJ" internally) was introduced in April 1948, and produced through 1950. Some leftover models were sold under the 1951 model year.
The basic 1948 Jeepster included numerous deluxe features and interior fittings in addition to a high level of standard equipment that cost extra on other automobiles. These included, among many others, whitewall tires, hubcaps with bright trim rings, sun visors, deluxe steering wheel, wind wings, locking glovebox, cigar lighter, and continental tire with fabric cover. The Jeepster had Willys' World War II-proven 134.2 cu in (2.2 L) straight-4 "Go Devil" engine, and plastic side curtains, but its US$1,765 price was about the same as a Ford Super DeLuxe Club convertible with roll-down windows, fancier styling, and a V8 engine.
The Jeepster's I-4 engine was rated at 63 hp (47 kW; 64 PS) and coupled to a Borg-Warner T-96 3-speed manual transmission with an overdrive unit as standard. The Planadyne single transverse leaf spring independent front suspension, entire drivetrain, front end, rear suspension, steering, and four-wheel drum brakes were from the Willys Station Wagon.The flat-topped rear fenders were taken from the Jeep truck line.
- The 1949 Jeepster began production with a one-model/one-engine offering. The price was lowered to $1,495, with some previously standard features returning as extra-cost options. Toward the middle of the year, an additional model was introduced, the VJ3-6, powered by Willys' new L148 Lightning I-6 engine.
- The 1950 model year featured the VJ-3 Jeepster's first styling revisions that included a new instrument panel and redesigned front end featuring a V-shaped grille with horizontal chrome trim. A new model was introduced with reduced standard equipment at a lower price. Willys' L161 Lightning six-cylinder was offered in addition to the standard Go Devil four-cylinder engine. Model designations were dependent on production timeframe, with early 1950s four-cylinder Jeepsters given VJ-3 463 and six-cylinders VJ-3 663, changed to VJ-473 and VJ-673, respectively, for later year vehicles.
The Jeepster's problems in the marketplace were its limited utility and practicality. It also looks rugged and off-road capable, but is not. Appeal is limited due to the basic construction, poor all-weather protection, and the low performance when equipped with the I-4 engine. Even with an optional six-cylinder engine and offering the VJ3 version at a lower price, the Jeepsters did not draw many new buyers due to three factors: a relatively high price, low performance, and the lack of roll-up door Windows. Sales were also limited by sparse advertising and an insufficient dealer network. The car was only offered with rear-wheel drive, thus limiting its appeal to typical Jeep customers. Its distinctive boxy styling and performance were praised by automotive journalists. However, the Jeepster did not catch on with the intended market segment.
Model year sales:
1948 - 10,326
1949 - 2,960
1950 - 5,836
A total of 19,132 Jeepsters were produced
Comments (10)
Parme
Bien qu'elle ne soit pas une citroën, elle est très bien!
3DClassics123456
L e design des "vieilles "Citroën, de Bertoni à la SM étaient vraiment exceptionnels, en effet.
x7
Great images. Great model.
Very nice Work.
3DClassics123456
Thank you. I do what I can, but I do my best.
gaius
Non seulement on se régale en regardant ce modèle mais, en plus, on se cultive (même si une interro sur ce sujet ne me semble pas à craindre !)...vu ce que tu en dis, il n'est pas surprenant qu'elle n'ait eu qu'un succès limité ! Mais ici, je suis certain qu'elle va avoir un grand succès.
FurNose
Great work, Alain! Didn't know it existed, but this is not so much of a wonder, since my knowledge lays more in the realms of aircrafts than cars. Never the less, very nice model and I love the details on it. Though a little bulky in appearance, it still is way more beautiful, than let's say Elon Musks Cybertruck or the Fiat Multipla
3DClassics123456
Thank youfor this kind comment. I never heard about this model too, until I saw one for sale on the web in the south of France. I do love this "strange" design, not a roadster, not a JEEP, not a town car, not a spider...Maybe a greater success if it was a "real" 4x4, not a 2x4 looking like a 4x4?
Saby55
Excellent work my friend 👍🙋♂️
virginiese
Un sacré modèle rudement bien réalisé ! J'adore le soin que tu portes à tous les petits détails ! Bravo !
Ken _Gilliland Online Now!
nicely done!
STEVIEUKWONDER
Your technical skill is without equal Alain. I will treat myself to this beauty and add your great wheel set to enable off roading! Great work Sir!
Steff_7
Very unusual car indeed, the shape looks...well like it shouldn't be on the road or safe...lol
Another awesome effort by you and looking forward to when the Lawyers are done with me cause I really need to get me some new cars :)
Excellent work :)