Here is the dress in action.

All the best.

LROG

(Joint Content Project Manager for Antonia Polygon - WM)

Wow!

Thank you, everyone who has contributed to this project. This is a fantastic achievment. I have few skills in this area, but if it is possible to contribute in any way, please let me know.

Fairy wings for Antonia!!!!!
http://www.sharecg.com/v/56933/view/11/Poser/Antonia-Fairy-Wings#commentAnchor

All the best.

LROG

(Joint Content Project Manager for Antonia Polygon - WM)

lmk

The dress and wings both look wonderful!  Thank you both so much for the gifts.

paganeagle2001,

I seem to have run into a problems with your Antonia Fairywings. The cr2 seems to load OK, but there is no visible geometry to be found anywhere. I have tried looking from the front, back, and side, with Wireframe view, but I just can't see any wings. Poser must be finding the obj file, because if did did not, it would throw up a file not found error, and it's not doing that.

I tried importing the obj file, and that seems to work just fine. It comes in in the center of the scene. I have had a look inside the cr2, and can't see anything obviously wrong. The obj file also seems OK, so I'm at a loss to know why its not working for me.

I tried putting the Antonia chest geometry into the AntoniaFairywings.cr2, and it loaded Antonia's chest OK. Then I tried the other way round, putting the AntoniaFairywings geometry into the Antonia-1.2.cr2. That did not work. This has me mystified, because i can't see anything obviously wrong. Has anyone else experienced problems with the wings?

P.S.
I have been working on a set of butterfly wings for Antonia, but experiencing some setbacks (see here for details).

Les, I have the Fairy Wings and the obj file is in the geometriesAntoniaFairywings folder.

BTW: the set is now on Antonia's Freesite as well. :)

We need to have an Antonia-WM contest right after one of the developers leans over and kisses Sleeping Beauty and wakes her to the masses. Rules are nobody on the development team can play, but they will be the judges. Within 30 days of Antonia-WM waking up, the best AWMNITWAS render posted both to this forum and the users gallery wins!  :blink:

I think it breaks the TOS (none approved contests where there is a monetary prize), but I would be willing to contribute to a Rendo gift certificate if somebody can get it approved. If not, then the winner and the runner-ups would go down in the Poser history books and be remembered until (if and when) this thread falls off the front page! :biggrin:

Love esther

Is nudity allowed, as long as it is tasteful? (well, my version of tasteful, anyway, which is pretty bland by today's standards... :biggrin:)

Not gonna sit there and just let Esther walk away with this one... :woot:

nah, no nudity, no fancy shaders, no really sharp swords, no dynamic clothes, and get your eyes off my gift certificate!

Awwww shucks....:m_whine: you're no fun... :m_temper:

Gosh Schlabber would have unbelievable fun with antonia.  Even I can pose her.

Love esther

I think we have another convert, Houston. Houston? Hello? :blink:

(I don't think there's anybodybackthere...)

yep she's a good figure!

I cannot wait for Afrodite-Ohki's Advanced Morphs, but I will have to.

lmk

I downloaded version 2.0 Ibelieve and have been playing around with her and the poses and morphs available at her website. What struck me was her almost photo real appearance and pose ability.

What I didn't like was her inability to smile correctly so my task was for her to have that cover girl smile that would light up her face and give her that seductive look, without having to change her face. I found the answer. Her teeth are to small and set farther back in her mouth making her look older and not as attractive as say: Victoria.

I scaled up her upper teeth by 5%(105.) and the lower by 3%(103.) and it set them right to the back of her lips just touching.  you have to open the jaw slightly to fix her slight over bite but when you start dialing  up facial expressions you can see a clear and improved appearance to her overall features. I've post an images to demonstrate.

Pretty nice,

Her eyes look a little scary though. I'm waiting for both Afrodite's morphs and the WM version before I really get to work.

I could be being a bit dense here, but will those morphs work for both the Standard and WM versions?

CHEERS!

Quote - I could be being a bit dense here, but will those morphs work for both the Standard and WM versions?

They will, indeed, as well as Antonia 1.2 and 1.0.  There will be full morph compatibility between all of these, as well as any earlier versions where the geometry was the same.

I usually make the translation dials for the teeth visible, on my private-use copies of Antonia.  Being able to adjust position and scale can be useful  :laugh:  Haven't found any use for rotating the upper teeth yet, but that could end up being useful, too.  :unsure:

There is now a top available at CP for Antonia Polygon - Standard by Karth.

Not sure if allowed to link, so just pop along and check out the new releases.

All the best.

LROG

(Joint Content Project Manager for Antonia Polygon - WM)

@GRichter: GOOD idea. Unfortunatly I can not spend money at the moment but if desired you can add the merchant resouce from my/our store as an extra price, more than once is okay as well. If the winner already owns it you can offer free choice from my store.

And I like that west - I want one for me as well!! And I still have a reward coupon at CP Yip

Thanks folks!

Freebie heads ahoy! I get prolific when something excites me so there may be some additions to my ShareCG portfolio when I get everything I need for Antonia.

CHEERS!

 IMPORTANT

People where not able to upload things to the Antonia site during a while because there was a major technical site update.
Leo changed the following things:

You are not able any longer to upload two files at once. Instead you will find a how-to about adding a second file, that has to be uploaded by editing. This way we will avoid annoying sever-hickups in the future.

There are new departments for basic figures (the things that are already there will be matched to them as far as possible, please drop me or Leo a PM and we change things as desired):
Stand Alone - this is where Antonia WM will go and Antonia Standard belongs to
Antonia WM - for things that work solely with Antonia WM
Antonia 1.2 and Antonia Standard - for the rest of it. I think that people will get used to the fact that what works with Antonia Standard will work with Antonia WM as well. Otherwise we'll have to add a note about this.

Then there is a section called "Developmental Period": It's made for all things that work with older versions. We think that we should keep them, as more as the A-mapping has the one or other fan who prefers it over the standard mapping.

The most important change: The store-link section (the one for commercial items) - Please use it!!! There are more commercial items available then the site lists. As they are spread over several stores customers have a hard time to find them. This is not only good advertising for Antonia but for the merchants as well!!

As far as I know every person who uses the internet is allowed to create links to stores, so if you find something: Add it! The creator may be thankful.

The departments in the Store section now show which department is filled with links and which not, this is less annoying then clicking through many empty sites.

We are now running a backup from time to time (in other words: In the unprofessional way and as long as our harddrive offers some space). So it should be possible to restore things if something happens (Please! Not!).

And please do not forget that there is a gallery section (since months): Use it! - Spread the word! (and this goes to my adress as well... ahem!).

And a last plea by Leo: If something doesn't work on the Antonia site or if you have an idea what's missing - send a PM, tell him or me. We can't think about everything and most of all not of every technical problem that may arise.

And Leo told me to end with

Lots of Love

Uncle Leo!

Thanks so much for the heads, up SF!

Rest assured I'll put up links to my stuff as and when I release it. It will stay at ShareCG though as I have been there for the longest and the rest of my work is there too.

CHEERS!

LOL I know how I sound, like a little parrot repeating the same thing over and over. But you know as well as I how bothering badly kept sites with lots of "holes" are.

Quote - > Quote - I could be being a bit dense here, but will those morphs work for both the Standard and WM versions?

They will, indeed, as well as Antonia 1.2 and 1.0.  There will be full morph compatibility between all of these, as well as any earlier versions where the geometry was the same.

 

In Antonia 1.2 and 1.0, there will be some empty/odd morph groups - these are placeholders for the morphs included with Antonia Standard. They are nothing more than an extra text in your Properties window though, Morphs and Antonia will work as usual.

Quote - In Antonia 1.2 and 1.0, there will be some empty/odd morph groups - these are placeholders for the morphs included with Antonia Standard. They are nothing more than an extra text in your Properties window though, Morphs and Antonia will work as usual.

And... version 1.0 would require actor renaming, to make it work.

Sorry, I shouldn't have mentioned 1.2 or 1.0.  That just confuses matters.  :unsure:  In terms of the geometry, there should be full compatibility.  In terms of any injection methods for the poses, there may be incompatibilities. 

1.0 has different actor names? Ok, that would be troublesome with the morphs LOL

Quote - @GRichter: GOOD idea. Unfortunatly I can not spend money at the moment but if desired you can add the merchant resouce from my/our store as an extra price, more than once is okay as well. If the winner already owns it you can offer free choice from my store.

 

And I like that west - I want one for me as well!! And I still have a reward coupon at CP Yip

 

I'm sure the vest would look as good on you as it does on Antonia.  :-)

Hi all, those that downloaded rom BluEcho's site please download File 01 again for Antonia Polygon - Standard.

This will cure the bikiniunderwear problem etc.

Those that downloaded from RDNA, please stand by for a update email for your zips.

All the best.

LROG

We are working at the site at the moment to get rid of a little error that happens when you upload only one file. Please be patient if the site stops working for a little while.

@Thalek: you are a flatterer Antonia has one benefit that I do not have when it comes to clothes - she does not have to breathe....

1.0 is not wardrobe compatible because of the location of the hip-actor. In fact just a question of naming bodyparts but important when it comes to poses, morphs, clothes....

Quote - @Thalek: you are a flatterer Antonia has one benefit that I do not have when it comes to clothes - she does not have to breathe....

[chuckle]  With the right outfit, even watching a lady breathe can be . . . interesting.

I'll ask this question again, as I find it hard to believe I'm the only one having this problem. Is anyone else experiencing problems loading the AntoniaFairywings.cr2? And has anyone loaded it it sucessfully?

lesbentley what program are you using

I just had a report that they don't seem to work in P7... I have no idea why... I'm so sorry :(

Quote - lesbentley what program are you using

P6, under Win2k.

I'll look into it... but I'm not sure why they dont show up.... But I'll try to get them fixed if I can :)

Sorry for not answering, Les... I confess that there is too much to do today to even unwrap and install them...:crying:

Quote - > Quote - lesbentley what program are you using

 

P6, under Win2k.

I got them fixed I'll update the package with the new P7 set... They should work in P6 also... I'll post a link here when they've been updated :)

The Antonia - Opinions? thread is very long and has been around for a long time. I think a lot of people skip it because they think of it as a development thread. Many folks chose to read a thread because of the title or how that thread has been developing.

May I post a seperate announcement thread about Antonia Polygon ~ Standard edition for those who might have missed or skipped over the news? I won't give links if that is a problem.

lmk

Attached Link: http://www.ShareCG.com/v/56933/view/11/Poser/Antonia-Fairy-Wings

Firefox won't let me post the link here so I put it in the Url box I hope it works, If not just download the package again..

They have been UPDATED

Rose2000,

Did you discover what the problem was? I searched high and low for the cause but could not find it. I figured that if I built a whole new cr2 for the wings from scratch, it would have to work. Since I can import the obj, the problem had to be in the cr2, and there is no logically possible way that a new cr2 would not fix the problem.

However, in spite of the logical impossibility of this method not working, the new cr2 did not solve the problem. So much for logic, absolutely useless stuff, I will never use it again!

The next thing I tried was loading the cr2, then importing the obj, then using 'Replace Body Part with Prop'. This did work!

So I then saved the figure to disk. I moved the resulting new obj to the correct place in the Geometries folder, edited the cr2 to reflect the obj location, and did a bit more tidying up in the cr2 (Shldrs and ForeArms removed). The result seems to be working fine, including the morphs, ERC.

However it still annoys me that I can't find the cause of the problem. So if you discovered the cause, please let me know.

No Les... I don't know what the problem was.. I just made a new copy in P7 lol

Rose2000,

Just letting you know that the AntoniafairywingsP7.cr2 is loading the obj OK for me. Thanks for the fix.

Very nice render Thalek :)

Just a little note ..

I forgot to add in the readme when parenting or scaling the wings its best to select the body, That way you can position them exactly where you want :)

The scale morph will only take them so far, so if you want them larger use the program scale also  :)

You're welcome Les..

If you should have any trouble with any of my stuff in the future feel free to email me.. I'm not on the forums a lot :)