Sat, Dec 21, 6:54 AM CST

Torso UVs for G3F Anatomical Elements

3D Figure Essentials posted on Feb 05, 2016 13905 downloads

Softwares: Daz Studio 4

Base Figures: Genesis 3 Female, Genesis 8 Female, Genesis 8.1 Female

License: This is licensed for commercial or non-commercial use.

Product Notes


This UV Set for the Genesis 3 Female Genitalia will enable you to use the G3F genital geograft with G3F characters which do not include a separate genital texture (for example, the default G3F Jeane texture). It derives the texture from the torso texture as previous generations of Genesis have done.

This UV Set is for the Genesis 3 Base Female.

There are no user-facing files. The UV Set is to be found in the Surfaces tab for the Genitalia. See the ReadMe file for full instructions.

NEW NOTE (June 2017): This UV Set can also be used on Genesis 8 Female, because the UVs are identical. Simply rename the "Genesis 3" folder as "Genesis 8" and install it as instructed in the ReadMe.

This product can also be used with Genesis 8.1 Female (released January 2021). Note: because there is no "Torso" surface on Genesis 8.1 you must copy the MAT from the "Body" surface instead.

DAZ Studio only.


Best Selling Marketplace Items by This Vendor



Freestuff Comments


)

CaymanStudios 3:06AM | Thu, 14 May 2020

Free5tuff, no this is only for the Genesis 3 and Genesis 8 Females.

Free5tuff 6:13AM | Wed, 13 May 2020

Thanks for the upload. Would this work on the male genitals as well?

)

CaymanStudios 5:13PM | Fri, 11 January 2019

_**spetsnaznr1**_, you must own the genitalia geograft (Anatomical Elements) which is only available with one of the Pro Bundles. When you load it onto Genesis 3 (or 8) you can find the surface under the Surfaces tab in DAZ Studio.

spetsnaznr1 11:11AM | Fri, 11 January 2019

3. Copy the Torso surface for G3F by right-clicking it in the Surfaces tab and then paste it onto the Genitalia surface. Where can i find Genatalia surface?I dont find it.

Grimblight 2:40PM | Sun, 25 November 2018

Ahh so you have to apply !Iray Uber Base shader to the Genesis 3 Female Genitalia before you copy and paste the torso texture then set it to your UV did not know Genesis 3 Female Genitalia was not already set to Iray

DM1975 3:06PM | Fri, 16 November 2018

Cayman, thank you a lot for your tip. I have put in place two folder structures on my computer where my DAZ 3D resources reside; one on my C: and one on my E: drive. At first, I copied your files into the corresponding subfolder on the E: driver. After I have read your tip, I copied the files also onto the C: drive. And not it works perfectly! (Don't know why this resource doesn't work in the other folder structure; I haven't had this problem with other third-party resources yet. Anyway, now it works.)

)

CaymanStudios 4:56AM | Fri, 16 November 2018

DM1975, you must have installed the folders in the wrong place. You need to merge the "data" folder in the zip file with the "data" folder in "..DAZ 3D\Studio\My Library", wherever that is located on your computer. So, for Genesis 3 the UV file should be at: "..DAZ 3D\Studio\My Library\data\DAZ 3D\Genesis 3\Female Genitalia\UV Sets\Cayman\Torso UVs\Base Female Torso UVs.dsf". I have also sent you a Sitemail.

DM1975 2:21AM | Thu, 15 November 2018

Hi... thank you a lot for the product, Cayman! However, I have troubles to change the UV Set for the Genitalia. Under Surfaces/Genesis 3 Female Genitals/UV Set it says "Default UVs", and DAZ 3D does not offer me to select another UV Set.

)

CaymanStudios 5:26PM | Sun, 21 October 2018

Nick, this usually happens if the shader on the geograft is not the same as the shader on the torso. You must apply the correct shader to the gens before copying the texture from the torso. This is explained in the readme. If you still have problems send me a sitemail.

nickdsharpe 4:42PM | Sun, 21 October 2018

Every time I try this the gens are lighter than the rest of my character. What am I doing wrong?

)

CaymanStudios 4:05AM | Fri, 27 April 2018

Brendon, did you rename the "Genesis 3" folder to "Genesis 8" as instructed in the Product Notes (above)? If you continue to have problems you can send me a Sitemail.

Brendon12343 2:22AM | Fri, 27 April 2018

I followed the instructions multiple times, though the anatomical elements remain gray. Trying to do this with Genesis 8 figure.

)

shonsu 12:41PM | Mon, 12 March 2018

Another Thank you here as well and when there is a texture map for the character, the UV set works beautifully.

Sarsifas 11:27PM | Sat, 10 March 2018

Thank you!

)

Satariel 10:49PM | Wed, 19 July 2017

lol!!!!!!

)

CaymanStudios 12:03PM | Sat, 08 July 2017

**Brockton**, the Parent folder is whichever folder is immediately above the "data" folder within your DAZ folder set-up. Usually it's "My Library", or something similar. So the data folder will merge with the pre-existing data folder.

brockton 8:33AM | Sat, 08 July 2017

I'm stupid but where exactly am I supposed to place the files? I can't find any named "Parent" anywhere. Should I place it in "My DAZ 3D Library", or elsewhere?

DrHemulen 3:49PM | Tue, 27 June 2017

Thank you very much. This is extremely useful. I actually prefer this to using the "correct" maps for V7. The normal genital maps have a hi-res bump map, that looks weird. No normal map either. Your UVs fix both issues.

Angel_Wings 1:33PM | Tue, 27 June 2017

Cant wait for G8. Should be easy enough, Considering its the same UV Map.

miketee10021 3:45PM | Sat, 24 June 2017

Thank you!!

)

CaymanStudios 4:48PM | Thu, 11 May 2017

**CajunBeauty**, I have sent you a site mail in response to your question.

)

CajunBeauty 11:22AM | Thu, 11 May 2017

" I suppose you could use it to gauge the precise position of the genitalia on G3F and so help with the texture creation" How do I go about doing that?

)

ptrope 8:52PM | Mon, 17 April 2017

OK, got it to work - you can't just choose the item and its materials in the Surfaces tab - you have to also select the item in the scene assets. Sheesh.

)

ptrope 8:48PM | Mon, 17 April 2017

Can't get this to work, but I'm sure it's not this product at fault. The geograft has different nodes than the V7 torso material, so pasting the material from one to the other doesn't work - this is not the first time I've encountered this. I've even tried applying the DAZ Iray Uber Base to the geograft and nothing changes - still the same incompatible nodes. Basically, DAZ doesn't really want anyone using genitalia, I think ;).

)

CaymanStudios 3:13AM | Sun, 02 April 2017

**CajunBeauty**, this is a UV set for the DAZ Anatomical Elements geograft which is sold with the Pro Packs. It simply enables the genital area of the Torso texture to be shown on the geograft. I suppose you could use it to gauge the precise position of the genitalia on G3F and so help with the texture creation, but you cannot include this product with a character you might sell, and it wouldn't really make much sense to do it anyway.

)

CajunBeauty 7:43PM | Sat, 01 April 2017

Can I use this to add my gens to the characters I make for sale?

)

CaymanStudios 5:54PM | Tue, 14 March 2017

**chuntuk**, most G3F characters use the Base Female UVs. Other UVs are usually restricted to the original character with the "7" after it, and those have their own special genital textures in any case, so the Torso UVs would be unnecessary. There may be a handful of others which might benefit from this - but the numbers are very small in comparison to the hundreds which use the Base Female UVs. For that reason it is unlikely that I will do any more of these.

chuntuk 5:08PM | Tue, 14 March 2017

Fantastic. Does exactly what it says on the tin. Don't suppose you'd consider expanding it to cover the other UVs, in particular V7?

)

timetwist 11:22AM | Thu, 05 January 2017

If you have trouble applying the figure texture, try applying the Iray Uber Base (Shader Presets -> Iray -> DAZ Uber -> !Iray Uber Base) to the geograft genitalia surface first. Then copy the torso surface from G3F and paste it onto the genitalia surface of the geograft.

)

CaymanStudios 9:41AM | Wed, 09 November 2016

**gobSIDES**, this is a UV Set for the Genitalia geograft which only comes with one of the G3F Pro Bundles (like Victoria 7 or Lilith 7) sold at DAZ. If you do not have this then this product will not work. If you do have it, and you have installed the files correctly you should see the UV Set "Base Female Torso UVs" available for you to pick under the Surfaces tab for the Genitalia. This UV Set will only work correctly and align the textures for G3F characters with the "Base Female" UV (so not for Victoria 7 herself). I have also sent this response to you as a Sitemail.

gobSIDES 4:37AM | Wed, 09 November 2016

Followed intall but can't figure out how to load? Sorry I'm new to this

chriscline 8:19AM | Wed, 22 June 2016

solves a major problem thanks

rochdale 2:09AM | Fri, 01 April 2016

this has proved to be very useful. good work and thank you. bill

)

savanna 2:49AM | Sun, 27 March 2016

Thank you and happy Eastern :)

toenail 6:20PM | Mon, 14 March 2016

Thank's man, cool.

)

RedzStudio 12:02PM | Mon, 14 March 2016

Thank you so much for this Cayman :)

)

sapat 10:03AM | Wed, 09 March 2016

Awesome, thanks!

)

jerife 7:44PM | Sun, 28 February 2016

Thanks a lot Cayman, it works wonderfully

Oblomov 9:34PM | Sat, 27 February 2016

Many thanks

)

ESPe71 8:23AM | Wed, 24 February 2016

Good job. Thank you.

)

james3dmc 4:40PM | Thu, 18 February 2016

Thank you!

)

hjake 11:15AM | Wed, 10 February 2016

great work. thank you

)

Gendragon3D 2:42PM | Mon, 08 February 2016

Thank you very much!

shadowangel1983 7:21AM | Mon, 08 February 2016

That is a very good tool. Thank you very much.

nobody85 10:46AM | Sun, 07 February 2016

Thank you very much!

)

Blackfoot 7:03AM | Sun, 07 February 2016

Outstanding Work <img class="emojione" alt="&#x1f632;" title=":astonished:" src="https://cdn.jsdelivr.net/emojione/assets/4.5/png/32/1f632.png"/> Thank you <img class="emojione" alt="&#x1f600;" title=":grinning:" src="https://cdn.jsdelivr.net/emojione/assets/4.5/png/32/1f600.png"/>

)

nobodyinparticular 2:14PM | Sat, 06 February 2016

Thank you very much.



30606 286

01
Days
:
17
Hrs
:
05
Mins
:
12
Secs
Premier Release Product
War Map for Daz Studio
3D Models
Top-Selling Vendor Sale Item
$12.95 USD 40% Off
$7.77 USD

Privacy Notice

This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.