"Make A Magic Box" - New FREE Class at the "U"

geep ( ) posted Sat, 13 October 2007 at 12:54 PM · edited Mon, 13 January 2025 at 12:17 AM

Attached Link: http://www.drgeep.com/NPU/admin/04/401/MagicBox_classroom.htm

*(click image to view full size)

*Hi Folks,

There's a new FREE class starting at Poaser U in Room 401.

Here;s a sample of Page 1 in the notebook.
If you are interested ...
You'll need to visit Dr Geep Studios (link below) or the classroom 401 over at Poser University to see the whole class.

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

bagginsbill ( ) posted Sat, 13 October 2007 at 1:31 PM

Dr. Geep,

Love your stuff, but I'm confused and also thwarted.

Your room 401 only shows the same first slide as above. Then you have "Well that's all we have time for" with Geep looking at his watch.

On top of that your web page has done something magical so that when I try to screen shot (PrtScrn) it to show you the problem, it doesn't show the screen shot, but instead the URL is in the clipboard.

Renderosity forum reply notifications are wonky. If I read a follow-up in a thread, but I don't myself reply, then notifications no longer happen AT ALL on that thread. So if I seem to be ignoring a question, that's why. (Updated September 23, 2019)

SSAfam1 ( ) posted Sat, 13 October 2007 at 1:42 PM

DG,

Do you have any modelling tutorials (for clothes) using blender, animator8, or Wings3D?

MadameX ( ) posted Sat, 13 October 2007 at 1:48 PM

Ditto what bb said, 'cept for the screenshot thingy....didn't do that here. Just wandered around in the basement for a bit.....

geep ( ) posted Sat, 13 October 2007 at 3:30 PM · edited Sat, 13 October 2007 at 3:32 PM

*To save a copy of a "Page" ... Right click and "Save Image As"*

@ bagginsbill

Thanks 4 the accolades ...

I just started this class and just posted Page 2 ... and ... . I post 'em as I do 'em ... ;=]

Sorry, I don't know 'bout your PrtScrn thingy cuz it depends alot on your browser, s/w config, etc. If you want to save a "Page", you might try using the method shown in the image above. Hope I am not being pedantic here but perhaps someone else may be interested in this.

@ SSAfam1

I only have an older tut for makin' morphs using "Wings3D" ifn yer interested ... but nothing for blender or anim8tor right now ... sorry ... ;=[

@ MadameX

Thanks ... ;=]

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

MadameX ( ) posted Sat, 13 October 2007 at 4:18 PM

Quote - I just started this class and just posted Page 2 ... and ... . I post 'em as I do 'em ... ;=]

Ah ok then. Just thought something was amiss there.

SSAfam1 ( ) posted Sat, 13 October 2007 at 4:18 PM

Dp,

Morphs as in human faces/body right? Not like clothing morphs?

geep ( ) posted Sat, 13 October 2007 at 4:55 PM · edited Sat, 13 October 2007 at 4:58 PM

Attached Link: http://www.drgeep.com/p4/morwings/morwings.htm

*(click image to view full size - link to tut above image)

@* SSAfam1,

Here is the Wings3D tut ... You can decide which it is ... ;=]

cheers,
dr geep
;=]

P.S. BTW - Who is Dp?

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

SSAfam1 ( ) posted Sat, 13 October 2007 at 5:00 PM · edited Sat, 13 October 2007 at 5:12 PM

Thanks for the link. Oops...I meant DG.

bagginsbill ( ) posted Sat, 13 October 2007 at 6:20 PM

Well since we're edumacating people, yea if you want to save an "image", not a "page", you right click, unless you're coopting the term "Page" to mean one slide of your lesson. But I wouldn't condone that terminology, as "Web Page" is pretty well known, and you are showing your lesson slides in a single web page. If you want to save a whole web page, you use "File/Save" because the page has more than one image and has words too.

Of course I wanted to do neither. I wanted to show you what I saw because I thought it was a mistake.

Can you explain why you dole out one slide at a time, but announce on the first one? Frankly, I'm not fond of this "check back later" idea. I'm pretty busy and if rendo did not have ebots, I wouldn't check back anything at all. You really think it's the best method to do one slide at a time and force people to keep polling your page to see if there is more?

Renderosity forum reply notifications are wonky. If I read a follow-up in a thread, but I don't myself reply, then notifications no longer happen AT ALL on that thread. So if I seem to be ignoring a question, that's why. (Updated September 23, 2019)

pakled ( ) posted Sat, 13 October 2007 at 7:16 PM

to be honest...didn't you do a 'magic box' tutorial a few years back?...;) mebbe just for P4...;)
s'ok...we never turn down new Geeptuts...

I wish I'd said that.. The Staircase Wit

anahl nathrak uth vas betude doth yel dyenvey..;)

geep ( ) posted Sat, 13 October 2007 at 9:29 PM · edited Sat, 13 October 2007 at 9:37 PM

@ bagginsbill

*"Can you explain why you dole out one slide at a time, but announce on the first one?"
Yes, it is so I can get some feedback to determine the interest level and, also, "steer" the tut in a direction that may try to answer any question(s) that viewers might have on the subject.

"Frankly, I'm not fond of this "check back later" idea.*"
Sorry, I can understand why you feel this way but I like to post a new page as soon as I create it and then I try to respond to any question(s) in the tut if applicable. I enjoy the interaction as opposed to just generating the entire tut and then posting it in toto.

*"I'm pretty busy and if rendo did not have ebots, I wouldn't check back anything at all."

I understand and I agree - if I didn't get an ebot for a new post to a thread, I probably would seldom, if ever, check back on a thread unless it was of great interest and then I would bookmark that thread.

"You really think it's the best method to do one slide at a time and force people to keep polling your page to see if there is more?"
*No, but I'm not sure what the best method is. I suspect that there are several different "best" methods depending on who you ask. The previous class/tut that I did was posted here on R'osity (one "page" at a time as I created them) but for this one, i.e., Magic Box, I will not post the tut here but only on my website and no ebots can be sent because my website is not setup to do that, hence, the "please check back ..." message. I am not trying to force anyone to do anything. Those that are interested are always welcome to view any or all of the 2,000+ pages on my website for FREE. I just enjoy sharing what meager knowledge of Poser that I have with any that are willing to "listen."

Sorry if I got a little long winded but I just felt like typing ... ;=]

cheers,
dr geep
;=]

P.S. BTW bagginsbill - you do an excellent job on the instructions (and images) that you post here in the forum and I just wanted to let you know that I appreciate the time you spend to create the images and accompanying explanations that go with them.

;=]*

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

geep ( ) posted Sat, 13 October 2007 at 9:34 PM

Quote - to be honest...didn't you do a 'magic box' tutorial a few years back?...;) mebbe just for P4...;)
s'ok...we never turn down new Geeptuts...

Hi pak,

Yes, I have actually done several Magic Box tuts but I wanted to do a new one for Poser 6 and using my new "Notebook" form.

Looking back at the older ones, they somehow seemed to lack "luster" (not that this one will have any better "luster" - ha ha) but, I shall try ... and beauty being in the eye of ..., etc., etc., etc.

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

SSAfam1 ( ) posted Sun, 14 October 2007 at 12:30 PM

Dr Geep,

Just wanted to let you know I appreciate your tutorials a lot. You're so animated and always cheery. Also very funny! I'm over at the PU right now...cracking up I might add.

geep ( ) posted Sun, 14 October 2007 at 12:43 PM · edited Sun, 14 October 2007 at 12:43 PM

SSAfam1,**

**Thanks for the post ... it's good to know that someone is watching and enjoying my "stuff."

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

pakled ( ) posted Sun, 14 October 2007 at 1:07 PM

we all enjoy 'em...no worries there

I wish I'd said that.. The Staircase Wit

anahl nathrak uth vas betude doth yel dyenvey..;)

geep ( ) posted Sun, 14 October 2007 at 1:37 PM · edited Sun, 14 October 2007 at 1:37 PM

ok, .......... then ..... here's page 3 ... but you're not forced to view it ifn ya don't want to ... ;=]

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

R_Hatch ( ) posted Sun, 14 October 2007 at 11:52 PM

I see that Dr. Geep is now using ebonics:

"That way we be tripping over things we don't need."

Or maybe he just forgot the word "won't"...

shedofjoy ( ) posted Mon, 15 October 2007 at 6:31 AM

I love your tuts DP,and the shadow catcher has proved very usefull when used with Daz's Cyclorama....

Getting old and still making "art" without soiling myself, now that's success.

bagginsbill ( ) posted Mon, 15 October 2007 at 8:03 AM

Dr. Geep is always entertaining as well as educational!

Renderosity forum reply notifications are wonky. If I read a follow-up in a thread, but I don't myself reply, then notifications no longer happen AT ALL on that thread. So if I seem to be ignoring a question, that's why. (Updated September 23, 2019)

geep ( ) posted Mon, 15 October 2007 at 11:12 AM

Thanks bb . ..................... I am always trying.

I know that because ............. my wife says I am very trying.

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

geep ( ) posted Mon, 15 October 2007 at 11:15 AM

Here is Page 4.

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

geep ( ) posted Mon, 15 October 2007 at 11:16 AM

... and Page 5.

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

geep ( ) posted Mon, 15 October 2007 at 11:18 AM · edited Mon, 15 October 2007 at 11:18 AM

... and Page 6.

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

SSAfam1 ( ) posted Mon, 15 October 2007 at 11:23 AM

Quote - Thanks bb . ..................... I am always trying.

I know that because ............. my wife says I am very trying.

cheers,
dr geep
;=]

LOL. My husband says the same. We're not difficult. Just missudaztood. ;)

Boofy ( ) posted Wed, 24 October 2007 at 10:38 PM

Are my eyes going :b_toocool: or are those pages shrinking in size DG????

Loved the hair room tute btw. Didn't help my hubby's pate though! you could make a fortune if it could.
:b_funny:

geep ( ) posted Thu, 25 October 2007 at 6:56 PM

Yes, it's very, very strange, isn't it ... the images seem to just keep shrinking everytime I post a new one. ... ;=?

Oh well, they're all still full size over at the U. ... the last time I checked anyway. ... ;=]

There are, also, Pages 7, 8, 9, 10, 11, 12, and 13 online over at the U.

cheers,
dr geep
;=]

Remember ... "With Poser, all things are possible, and poseable!"

cheers,

dr geep ... :o]

edited 10/5/2019

Boofy ( ) posted Thu, 25 October 2007 at 8:01 PM

that makes my poor little orbs feel much better Dr.G

Explore More

Renderosity Forums / Poser - OFFICIAL

Welcome to the Poser - OFFICIAL Forum

Subject: "Make A Magic Box" - New FREE Class at the "U"

Explore More

Trending Topics

Social

Forums General

Welcome to the Poser - OFFICIAL Forum

Subject: "Make A Magic Box" - New FREE Class at the "U"

Privacy Notice