I'm working on a big history project with a partner (different continents), both work with Poser, and I've created a few characters (V4, v4 ++, m4 m4 ++, freak , m4-k4mixer and especially my custom Zbrush morph) and would be very helpful for us if  I could send my  finish models (fully functional ) so he can do his part of the work, is there any way to do that ???( I know the M4 and V4 are  installed on their machine)

thanks  in advance

You neglected to say what version Poser you and your partner(s) have on your machine and also if it's win or mac and what version OS.

Quote - You neglected to say what version Poser you and your partner(s) have on your machine and also if it's win or mac and what version OS.

Apologies , Both Poser 2014 , OS. Win7 

We can not answer this question.

The only place to get a legal answer is to ask this at DAZ.

I don't know if this would help but try this. Under Scripts > Utility > collectSceneInventory might be helpful to you in some small way. Just follow the prompt. Maybe somebody else will jump in and give more helpful advice.

Quote - We can not answer this question.

The only place to get a legal answer is to ask this at DAZ.

I say that respectfully , If you read my question good ,  I am not looking for legal advice, I am looking advice for make  (what I put above...) why I have to check with DAZ? if both have  characters based  purchased on your time and what's special about my models this done for me and to my knowledge, I think it belong to me

I do not know, if you want I  reformulate the question:

I have a free model and I made the changes with Zbrush in it , now I want to send it to someone that he can use in your poser. anyone know how I can do that ? sending it the CR2 is sufficient? my morph are stored in that file?  I  can "pack" my full model ?

Come on, nobody ever ask that ? I think that is an interesting question

Quote - I don't know if this would help but try this. Under Scripts > Utility > collectSceneInventory might be helpful to you in some small way. Just follow the prompt. Maybe somebody else will jump in and give more helpful advice.

ok it's a start, I really I do not  if it works but I'll try, and if it works, I will comment here, thanks for taking your time to answer me ThunderStone

If you both have the meshes, you can save any morphs you made in zbrush as pose files and send those legally. As far as someone else's mesh, that is a no-no

Quote - If you both have the meshes, you can save any morphs you made in zbrush as pose files and send those legally. As far as someone else's mesh, that is a no-no

Ok ,  thanks , yes , this can help me, my question now is how I can make these Pose files with MY  custom morphs (my custom morphs are between 1 and 4 morph depending on the model)

come on, stop caring about what others will think, we are in the forum with people who know more Poser in the world and only a couple of short answers, it seems they are more concerned about the "what will they say" than in being members of a free community looking forward to to share knowledge

it is as if someone asked me how put bold text in word, and instead of telling "select text and touch the B" I answered "I can not answer you because IF  your office is not legal you can not do it" , Just relax a little and enjoy the ride

Quote - I don't know if this would help but try this. Under Scripts > Utility > collectSceneInventory might be helpful to you in some small way. Just follow the prompt. Maybe somebody else will jump in and give more helpful advice.

I Try what you commented me and is very interesting what I got, a folder with a set of files that I think are all the elements of the scene, I did not know that function exist....

I wonder how these files would behave if I try to open them in another machine? , So I have to try....

thanks for the help,man

I'm still waiting for other ideas, but one at a time, please do not answer all together :)

Glad I could help... I had a problem with one of my scene and had to do this to send it to the tech support. They went through it and it worked... You could try it on the same computer but use a different name to save the project.

Quote - Come on, stop caring about what others will think, we are in the forum with people who know more Poser in the world and only a couple of short answers, it seems they are more concerned about the "what will they say" than in being members of a free community looking forward to to share knowledge

it is as if someone asked me how put bold text in word, and instead of telling "select text and touch the B" I answered "I can not answer you because IF  your office is not legal you can not do it" , Just relax a little and enjoy the ride

To me, this kind of comment completely unnecessary. You asked how to do a specific thing, and people responded that it's not legal.

And we do have to care about what others think, because Renderosity cares what others think, and polices their forums. For example, posting links to warez sites, or suggesting someone use one will likely result in a banning, because it promotes illegal activity. And if Renderosity didn't work to prevent it, they would be seen as allowing it, and would not only lose vendors, but the US Government would likely shut them down.

People advised you that sending the mesh isn't legal because they don't want you do get yourself into trouble. Not for any other reason, so don't get pissy.

Now, as to your question, you could take the initiative yourself and do some searching, not only here, but also through Google, for "Creating morphs in Poser" to find what you're looking for instead.

It'd be a whole lot faster than waiting for someone do do it for you.

Quote - To me, this kind of comment completely unnecessary. You asked how to do a specific thing, and people responded that it's not legal.

And we do have to care about what others think, because Renderosity cares what others think, and polices their forums. For example, posting links to warez sites, or suggesting someone use one will likely result in a banning, because it promotes illegal activity. And if Renderosity didn't work to prevent it, they would be seen as allowing it, and would not only lose vendors, but the US Government would likely shut them down.

People advised you that sending the mesh isn't legal because they don't want you do get yourself into trouble. Not for any other reason, so don't get pissy.

 

Now, as to your question, you could take the initiative yourself and do some searching, not only here, but also through Google, for "Creating morphs in Poser" to find what you're looking for instead.

It'd be a whole lot faster than waiting for someone do do it for you.

JAJAJAJAJAJAJAJAJAJAJAJAJA

search "Creating morphs in Poser" ???  ,  is this a joke?

WHY I have to find that, if I want to do something completament different  ?

Seriously, you read what I want to do? please I have a question I want to know the valid answer, you walked here just to fight, do not even you read my original question

If you do not like the question, there is a cross at the top right of the browser , but PLEASE  ,respects my question and do not spoil the thread with crap

ps."Creating morphs in Poser" ....You made me laugh....

Quote - Glad I could help... I had a problem with one of my scene and had to do this to send it to the tech support. They went through it and it worked... You could try it on the same computer but use a different name to save the project.

I'm probe open the scene in my pc (other name)  and work Ok ThunderStone , this tip help me a lot, thank you , perhaps be a way to do the same but only with the character ,will continue to seek....

If your collaborator has the same assets, just save it as a cr2 and send that.  You both have licenses to it...

Quote - If your collaborator has the same assets, just save it as a cr2 and send that.  You both have licenses to it...

Yes , my partner has the same asset ( and of course the respective licence...) the most of  this models  are the basic m4 and v4, the big difference are in my zbrush morphs , and there's my big doubt , if I sent the cr2 , ¿ my Zbrush morphs will be included in the file?

Thanks in advance

Quote -
Yes , my partner has the same asset ( and of course the respective licence...) the most of  this models  are the basic m4 and v4, the big difference are in my zbrush morphs , and there's my big doubt , if I sent the cr2 , ¿ my Zbrush morphs will be included in the file?

If you have loaded the morph targets into the figure, they will be saved in the cr2...

Quote - If you have loaded the morph targets into the figure, they will be saved in the cr2...

Yes it load the morph into the figure , I'll try your advice, and the tip gave me thunderstone above and I tell you the result , thank you very very much for all your help WandW ,I really appreciate it

If you are going to email cr2s, be sure to compress them as they will be large attachments otherwise....

Second try: Only the legal owner of the figures can tell you "what is" or "is not alowed", and how to proceed.

That wasn't his question, Tony...

Quote - If you are going to email cr2s, be sure to compress them as they will be large attachments otherwise....

ok thanks for the tip , one character would be no problem with the size , but multiples charactes weight  significantly

thanks for all the tips Thunderstone and WandW , your advice worked perfectly, I can send everything smoothly