FVerbaas posted at 7:29AM Fri, 17 April 2020 - #4386479

So, just for understanding, if I were to add say 'bicycle' I would have to make a post:

• 'POST Day 001' woman; bicycle

And a render figuring a woman (not necessarily the Aiko4? one you used) and a bicycle. Correct. It doesn't have to be the same character I use. But it will be just a render of a woman and a bicycle. We won't be able to pose the woman until someone gives us an action or emotion that can influence the pose. The bicycle can be anywhere in the scene so long as it's in the scene.

You can render as many versions as you like or as your mind can think of so long as it only contains what was posted

Render Day 001: Woman

This my render until someone posts another word

POST Day 001: Woman

Please Manually Number your Post for quick Reference.

My one word is Woman. Which means a simple Base with no hair no Clothes no expression. Skin Texture is acceptable. You can post a profile if you like, to help keep the nudity down. So my first post should read as.

POST Day 001: Woman

This way you know that this is a post from Day 1 of the activity, It will make it easier to find everything that was posted on Day 1. There is flexibility due to time zones so someone's Day 1 may have a different date.

It's been a while.

SamTherapy posted at 6:42PM Thu, 19 December 2019 - #4373566

Did anyone make a weight mapped version of A3? I like the way the model looks but the bending is as good as any of the standard 3 version models, ie, bleedin' awful. I'd use the thing a lot more if it could bend better.

There is A3 for genesis, but you can also use some quick tricks to fix A3's flat thighs when bending. Most of the times I can actually get it to where the thighs are round and not flat, It just depends on how deep the bend is. It doesn't require any morph brushes or anything like that which is good.. This is A3 sitting in a post that usually causes the thigh to go flat. You can kind of see the flat thigh issue on the left leg. Normally both thighs would be flat.

Here is a different view of the same pose from the other side so you can see a deeper bend. I didn't use any special morphs or adjustments on this one. I just used Bend, Side to Side, and Twist of different parts of the legs. It took maybe a 30 - 60 seconds to correct the bend in the legs.

Similar pose here

Snarlygribbly posted at 1:54PM Sat, 23 November 2019 - #4370989

Without knowing the exact order in which you're doing things it's hard to be definite about what's going on, so treat this comment with caution.

Anyway, one of the things EZSkin does is call the Poser API method 'ResolvePendingTextures', which forces Poser to make sure it has the full path to all textures (it often doesn't). Depending upon what order you are doing things, what textures are being used and what might be in the Poser cache, it could be that this call is making things work where they weren't working before. Or it might have nothing to do with the problem :)

That sounds reasonable. Here are the steps I take

1. Apply materials to V4
2. Apply EzSkin
3. Delete V4
4. Open any previous character I've created or start a new one and the eyes show up as it should even though EzSkin 3 wasn't applied to the following characters.

Whatever it is, I'm glad I've found a consistent way to get it to work now. It was driving me crazy and I'm one of those people who can't let a problem go until I find an acceptable solution or work around.

AmethystPendant posted at 12:18PM Fri, 22 November 2019 - #4370947

Does the eye surface on the one that doesn't work have any maps (probably reflection). If so make sure they actually exist on your drive in the place poser expects them to be

Unfortunately I'm going to just mark this as one of those crazy problems with no reasoning. This morning I discovered. that If I apply EZskin on the eyes on one model, for example v4 then the eyes show up correctly. That's not the crazy part. The crazy part is that after i do that. I can open up any V4 character that I've created either old or new and the eyes will show up correctly without me applying the Ezskin.settings. So yeah... Crazy stuff.

FightingWolf posted at 10:06PM Thu, 21 November 2019 - #4370934

Update on this crazy stuff. I uninstalled Poser and reinstalled it using the 11.2 installation updated installation. Eyes are now back to normal. in the OpenGL preview.

Too good to be true. It's broken again just that quick.

Update on this crazy stuff. I uninstalled Poser and reinstalled it using the 11.2 installation updated installation. Eyes are now back to normal. in the OpenGL preview.

blackbonner posted at 6:12PM Mon, 14 October 2019 - #4366945

Hi everybody, i did not read the whole thread, so if there is already an answer to my following question, please give me a hint where to find it. I'm a bit late to the party, i guess. Despite the fact that i'm using Poser since Version 4.5, i never ever touched on the Aiko Figure. I recendly build up my Runtime Folder System, realizing that i had picked up more stuff for A3 as i had expected. So i started playing with A3 in the new Poser 11.2, but i was stopped by several issues i ran into and now i'm here to seek for a helping hand. I load the A3 Figure into the scene, apply all the A3 Morphs for Head and Body, like i was us to do with V3 or M3. Then i was trying to pose the Figure and thats does not working very well. I killed the IK on the Figure and move her leg, the knee stays putt and the mesh is broken. I changed the Skin Methode but that did not changed anything. If i apply a character morph, the Armes are distordet as well, right from the moment i applyed the morph. What i have done wrong, is this happend to some of you during a session with A3? Is there an update for the figure to correct this issues? Any help will be appreciated.

Just read what you posted with the picture and realized that everything is working now.

seachnasaigh posted at 12:03PM Sun, 06 October 2019 - #4366208

A3 with Thorne's Sydni morph, on -AppleJack-'s Treehouse 2 which comes with P11.2 The skirt and shawl are Fabiana's Hidden Winds set. Dixie hair by Lady Littlefox.

I've made Superfly-compatible material modifications to Treehouse 2, and intend to release it as a freebie.

That's a huge glass. Aiko 3 is about to get her drink on.

EClark1894 posted at 9:29AM Sun, 06 October 2019 - #4365658

Give Bondware a break, Gate. They've owned Poser for all of three months, and they've worked as hard as they can to remedy the problems users are having. Any user worth having as a customer should realize that.

This is the only reason I'm not upset. Do I wish things could be better? Of course, but I understand that this is a transitional phase. It's only normal to have some unpleasant issues pop up. It's not like they want to hear everyone complain lol. I'm also sure they didn't take over for the purpose of failing. I'm actually looking forward to the change. Poser has changed many hands during it's existence and each hand over made Poser better.

EClark1894 posted at 8:53AM Sun, 06 October 2019 - #4366168

A4 killed anything I felt for the Aiko line.

A4 took a different path than Aiko 3. Instead of trying to follow the look of 2d anime and Manga. It started to take more of a look that you would find in Japanese movie scenes like Final Fantasy Advent Children. I don't mind since it makes it easier to create that look. I just switch between the two. The new Genesis 3 series does the same thing but it offers more variety in both areas.