The color also depends on what the horse is being feed. Alfalfa tends to make it a bright green. The photo above lookes like the horse is being fed grass hay. Exposure to the elements changes both color and consistancy.  As it drys out it turns to powder.  Try shoveling that. 

How about using EmotiGuy. He can be found at Daz3d.  EmotiGuy Sun morph can be found at http://eps.roudneff.com/eps/download.php?lng=fr

There used to be a moon texture available for him. But I could not find it.

Daz 4 is being neglected because I can not read the fine text they in their infinate wizdome decided on.  Can't look at it for more than a few minutes without a headace.  Can't do anything with it.  Will be staying with Poser and Daz 3 until they decide to correct the font size issue. I did recently purchase one of the Genises expansions just in case. Poser pro 2010 gets me upset to the point I have to turn it off for a few days at at time.  Why haven't the fixed the wind generator by now? And I have other problems using materials made specificly for it not working. Sorry Dr. Geep but I can't follow any of your building projects any more because they don't work with this version.

The passenger should remain silent, unless questioned directly by the officer. And then he should limit what he says to the issue at hand and not tell your or even his driving history. They can look that up on their own if they feel the need to. Better to not say any more than necessary.  Since you were pulled over, you were going to get at ticket anyway.

I have only been stopped twice without a ticket.  The first time the cop was profileling. My car did not have any heat and I was wearing a heavy hooded jacket and a blanket.  He thought I was a male gang banger.  To his suprise, and it was very evident on his face, I was a female on my way to work in the very early am hours.  This was in the middle of the winter. He said that he watched my tail light go out.

The second time was my fault I was speeding to work. When I was pulled over. He cought me going 65 in a 55.  My only excuse was that I was late getting to work.  The only reason I did not get a ticket was because he was called away for something much more important.

I would suggest that you not allow your brother in your car until he understands your rules.  Your car, your rules.  Right or wrong.  Same as eating or not eating in your car. There are people not allowed in or near my car because they do not understand the rules or refuse to obey them.

Quote - Study this shader. It's not every trick I know, but it's a basic high-quality tile shader from which many additional variations are easily made.

Experiment with it. Ask me questions.

Is there something not shown in the material here that I don't know about. As setting it up just like the example doesn't quite look like the example and just renders a flat non-tiled floor? World units set to inches. Raytraced light and raytracing enable in render setting. 2 Raytraces. Using Poser Pro 2010. Tried to add a screenshot but it failed. I am not going to try again with the screenshot don't have enough time in the day to figure out why it failed. When it was smaller than recommeded.

Or is it not going to work with Poser Pro 2010 as I have had other things just not work in it as I would work with 7 or earlier.

http://www.planit3d.com/source/meshes_files/tent.htm

I believe that the above is what they are talking about. 

I found this one in free stuff.  http://www.renderosity.com/mod/freestuff/details.php?item_id=23860   P5 Dynamic Bed.

There used to be a tutorial on how to make your own dynamic mattress but I am having trouble locating it. There was a download link for a mattress.

http://www.sharecg.com/v/40278/3D-Model/Dynamic-matterss Goes with this tutoria/cnversation.  http://www.renderosity.com/mod/forumpro/showthread.php?message_id=3615239&ebot_calc_page#message_3615239 This might have been the one I was thinking of.

Another article that may be of interest.  http://www.renderosity.com/mod/forumpro/showthread.php?thread_id=2102851&page=2 No bed that I could find but you may try contacting the author.

No dynamic pillows found. Sorry I could not be more helpful. Note, I only checked free stuff. There may be something in a market.  So you may want to check a few.

Thank you bagginsbill for the information.  I will play with this for a while.

Quote - Having trouble exporting V4. Got the materials stripped down to the basics. Got the latest versions of lux and lux2pose. Using Poser 8. Get an error message in lux2pose (see top of picture) which I first thought was because I had V4 installed in a Poser 6 Runtime, but I reinstalled her into the P8 one, deleted and then reloaded the figure from the P8 Runtime and still get the same message.

When I close the message lux2pose says that it is still proccessing V4, but hangs and doesn't do anything. When I close it and try to open the resulting file it aborts, and I get the error log (bottom of picture) obviously because lux2pose didn't complete the export.

What am I doing wrong? Hopefully it's not my antiquated computer that can't handle it! :)

I don't know if anyone answered this question or not. But I get a message just like this if I do not apply a lux material to one or more materials that get imported into Poser2lux from Poser. You may want to check that either all the materials are updated or remove the ones that you don't need.  If someone already answered this, just ignore.

Ok, I have been working with the lastest Version of FemaSu. She has very few material zones.  One for the head, body and mouth.  I have been trying to figure out how to seperate the lips and nails out so that I can work with them. Without haveing to create a new UV map.  Thinking along the lines of using masks. Is it possible to connect a single rule to multiple copy templates.

I read the manual and have been looking through this forum. But did't find what was needed to do this. Can someone please point me to a tutorial or explaination? Keep in mind that though I do have some programing background. It has been a long while.

Thank you.

What I did was re-install poser on the external drive for each computer I wanted to use it on. I just installed over the same location on the external drive. This way it setup all the support files that were needed on each computer. Previous versions of Poser only required you to register it on each computer.

I only use two computers with it. Mostly my laptop. But if I run into something that won't render on the laptop. I just move to my desktop to render. Have not had any problems this way. I also setup a seperate directory for all my poser content.  That way if I install another version of Poser or another application that can use the same files. I don't have to re-install the content again.

And here in S. California distance is normally measured in hours.  When my mom came out to visit she asked how far it was to the next town. I told her 25 to 30 mins. Then she asked how far to LA. The answer was 2 and a half hours.  She asked me why everyone in California gave hours instead of miles. I let her know that the distance in miles really didn't tell you how long it would actually take to get there. When under certain conditions like time of day, weather and such. Could make a three mile drive take 2 hours to get there.  I remember being parked on the freeway for over an hour more than once. Just waiting for traffic to move. Heaven forbid there was an accident on the road. You might as well turn around and go home.

www.runtimedna.com/forum/downloads.php  morphing rose  - Free

There have been a few others but I can't remember where they were.  If I remember I will let you know.  Other wise, I suggest searching the Free Stuff and google.

Daz3D and RDNA both have a fairly large number of flowers and other plants for sell.  There are a few here as well.

Quote - Thanks for letting me know pdg ...

Hope it gets fixed ASAP !

Should we make a fancy roof? ... :blink:

Yes, Please.

K4 and Chibi are the same model. Just different morphs. If you have K4 you, have Chibi and visa versa.