Right.

Thta's done. I did download again. All is fine now.

But I do not think I'm going to buy it.. too much dollars for my poor Brazilian REAL....

The Version 11 now with good affordable preice, as said here will be absolete in a about one year or so... like some others before..wont't work anymore in the future Microsoft Windows...

It's a pity for us - with the less power of purchasing aka inflation!

thanks for all the sugestions.

Right I was afraid of it...Poser 11 will not be usable in about one or 2 years....like the other Poser I brought, I thought it was Poser 10, but was from 2007.... guess is not Poser 10. The thing about it is that no use anymore wont instal in any Windows. Last was Wind 7.

thanks to answer me.

Now, I have try to instal an evaluation POSER 12, and it says> This software wont instal in your PC.  Contact the Publisher. Is that a joke?

I m running a very new Alienware M15

Supposed to run almost anything in it.

any sugestions?

Hope, Thanks So I just write that in my website to show people where I'm at Renderosity.com Thanks

Quote - I had that problem with P9 when I upgraded to Win8.1, but they have a patch for that. Contact SM technical support.

Yes, please Who in Smith Micro support? because I did contact then and they said there's no way will work with Win  8.1 - note mine is Poser Pro 2010.

thansk

Yes, Thanks.

good

it's Poser Pro 2010 - do you think is the same sh...?

Below here you can see some of messages exchange from SM and I. Now tell me, what do I do?

Response (John Csaky)     05/03/2010 07:57 PM
I apologize for the inconvenience. I think something corrupted during the install. I suspect that is why you are getting all these weird issues. I would try and fully uninstall Poser Pro 2010 and delete preferences, etc....

I then would reboot, and run a Clean Reinstall in Diagnostics Mode using MSCONFIG.

http://support.smithmicro.com/cs/smkb.cfg/php.exe/enduser/std_adp.php?p_faqid=2099

Verify that it is installing to your Program Files Folder and the Content is installing to your Shared Folder.

You did not indicate where you live, but if you live in the US, please include a Phone Number and time (including Time Zone) when you can be in front of the computer, in case a call is warranted.

If you have any questions about the Clean Reinstall, please let me know.

Thanks

John Csaky  |  Customer/Tech Support
Smith Micro Software, Inc.  |   www.smithmicro.com
 
 Customer     05/03/2010 03:14 PM
Do you have the 64 Bit Version of Poser Pro 2010 installed?

Yes I do.

The fact you have it installed to the x86 Program Files Folder indicates you are using the 32 Bit Version.

I had no idea! Because I did choose the 'no 32 bits files' when I installed!

The 64 Bit should be in the Program Files Folder, under Smith Micro.

The program has choose the path. Not I.

Also, do you have IE 8 installed?

Yes, it's part of Win 7! I did not uninstall...is here but I don't use.
Only when I wanted to make updates manually to Win 7, I do need IE9.

What now?
 
** Response (John Csaky)     05/03/2010 01:50 PM**
Thank you for the images. Do you have the 64 Bit Version of Poser Pro 2010 installed?

The fact you have it installed to the x86 Program Files Folder indicates you are using the 32 Bit Version.

The 64 Bit should be in the Program Files Folder, under Smith Micro.

Also, do you have IE 8 installed?

John Csaky  |  Customer/Tech Support
Smith Micro Software, Inc.  |   www.smithmicro.com
 
 Customer     05/03/2010 11:03 AM
Hi,
Browsers:I use Chrome, Firefox and Safari all updated every 15 days if there's any! So these are newly update. I don't use IE since Firefox arrived!
My Poser is on default C:Program Files (x86)Smith MicroPoser Pro 2010
My Runtimes additional are in external hard drive (WD Notebook)which is connected to desktop 24/7. I:3DLandProgram FilesPoser Pro

I can use a scene with 300 dpi,and Manual Firefly which will give me the best 'look' on the render I wish.
I also can use a default render and the same happens! When making an animation.
Look:     squeker.jpg
That simple rat with 2 movements in 30 frames to be render in Flash did stopped the Poser as you can see in the image; again.jpg
The point is; Cloth room and Flash animation won't work as it should for fine program that is working on 64 bits!

Screen Shot of your Render Settings,Look: sett.jpg ( Now when I touch the 'options' button to change to better colors etc.. that happens, Look: again.jpg
Later it did render the animation but only at 4 colors because I did not touch the 'option' button.
I say, when the program stops, I 'm obliged to close it the Library stays on the screen without closing with the program! I have to close it alone by clicking into it and closing.
Screen Shot of your General Preferences Render Tab Settings and Screen Shot of your General Preferences Library Settings, Look:      gprefe.jpg | gpreftab.jpg | gpref-tab.jpg |gpref-tab1.jpg | gpreftab-2.jpg
 
** Response (John Csaky)     05/03/2010 08:57 AM**
I apologize for the difficulties. This could be due to some settings. To better assist you, please provide some details on the Scene (Figures and Content Used), Screen Shot of your Render Settings, Screen Shot of your General Preferences Render Tab Settings, Screen Shot of your General Preferences Library Settings, along with the following additional details...

5.)    Full path to your Poser Program Folder if other than default
6.)    Full path to your Runtimes
7.)    Internet Browser and version number (the library now uses browser functionality)  If you use other than IE on Windows please include the Version Details for IE

Thanks

John Csaky  |  Customer/Tech Support
Smith Micro Software, Inc.  |   www.smithmicro.com
 
 Customer     05/01/2010 12:51 PM
the Library i still open when the program has closed!(3poser-flash.jpg)

the image (posererro2.jpg), shows you the Task manager in Win 7 64 bits the situation Poser Pro is, totally stopped when I try for the third time today to make a movie in Flash! I have 8 GB memory! a 2GB Ati Radeon 4870
Look my system!
OS - Microsoft Windows 7 Pro 64 bits
   *  RS-A00-ESBA / Cooler Master RS-A00-ESBA Real Power 1000W ATX 12V 2.2 & EPS12V 16dBA 120mm   ( PSU )
My memory is:
Installed Physical Memory (RAM) 8.00 GB
Total Physical Memory 8.00 GB
Available Physical Memory 1.99 GB
Total Virtual Memory 16.0 GB
Available Virtual Memory 10.5 GB
Page File Space 8.00 GB

Video card: ATI Radeon HD 4870 X2 ( HD 4870 X2 750M 2GB DDR5 DUAL DVI TV PCI-E)
My board is a:

   * System Model:   XFX nForce 780i 3-Way SLI

   *   (  http://www.xfxforce.com/en-us/products/motherboards/7series/780i.aspx  )
 
 Customer     05/01/2010 07:54 AM
Hello,
I'm totally disappointed with your final product! The PoserPro is acting as a Beta! I'm having the 'freezing' issue as many I try something that is not in the 'main menu' (to say in the beginner normal user)
Example.

   * making use of the Cloth Room....happens it takes forever and sometimes even stops all and I'm obliged to re-start the software.
   * using the animation settings, I try to use FLASH as option instead of AVI and stops all and I'm obliged to re-start the software. Look the picture.

Annoying and very beta behavior!
I wonder what you're going to do about it?
I already lost many of my works because the software doesn't have a 'last minute' save.
Cris

thanks!
as soon as I have time to do it I'll post here.
Thanks again
Cris

I'll investigate about it.
So far I just got via normal mail a version of Poser Pro 2010 - had not yet time to work on it but few tries only and 76% of these tries were frustated by the library not functioning or when it did function the freeze situation took place.
Unfortunelly I need more time to post something here.
Note: I gave up about Poser 8.
Now I'm testing Poser Pro 2010.

Quote -  just a sad update - Poser Pro 2010 does the exact same thing.  (gets stuck on pop up questions boxes)
 

D

well that's more than sad! That's final for me...I'm getting myself to learn DazStudio and better use of Vue (which I have and never use it! becuase I'm so damm confortable with Poser)

Ok pals, I took notes about all that. Now it's time to render :))
Bye bye
Hugs
Cris

tell you: only thing I have not try in your list (BTW. thank!)

-  Have you tried deleting the preferences and uninstalling and reinstalling the program? If not, try doing that too.  The preferences are located in [User folder]> AppData> Roaming> Poser.  They are all contained within the 8.0 folder.  Just make a copy of that folder, and then delete the original.  (Use the copy to restore the settings in case resetting them doesnt work.)
I use to delete the TEMP in same location(almost same).

Never crashes when I rendering. It render or it render not. If I put too much heavy stuff in the render and go for the MAX of Max settings then won't do it! ODD!
Freezes when I delete anything from the scene like 80%.
Closing a doc. and opening other happens to crashes! About 50%
Won't like to import an object..that's odd. I'm obliged to import it from Poser Pro and save and then go with it as > import a pz3 then goes perfect.

Actually I'm going to live with that...untill a pacht shows up to fix it.
I'll not mess up with my new system, new OS and all newly installed  because of <poser
That's a decision I did today..its getting too far.

Thanks for your help, and post here when  you hear something has  definitevelly fix all the bugs in P8. - for us using Win 7 64 bits.
thanks
Cris

No adobes running..and mine just crashed right now!
Obviuosly something to do when I delete something in the scene..happens always or many time when I do that...