Thu, Nov 28, 3:31 PM CST

Renderosity Forums / Poser - OFFICIAL



Welcome to the Poser - OFFICIAL Forum

Forum Coordinators: RedPhantom

Poser - OFFICIAL F.A.Q (Last Updated: 2024 Nov 28 11:20 am)



Subject: Daz Platinum Club Closing???


Disciple3d ( ) posted Thu, 08 May 2003 at 8:52 AM · edited Tue, 26 November 2024 at 1:40 PM

I've heard mumurings that the Daz Platinum club will be closing when the initial memberships are up. Is there any truth to that? I notice the platinum membership is still available so I guess it would need to be a year from when they stop offering it. Anyways, I feel like the prices in Platinum club are a great deal and hope that membership goes on. Can anyone from Daz address this? Regards, Brent

If you want to up your content game, get schooled to be a pro with Sixus1 Mentoring today!


danfarr ( ) posted Thu, 08 May 2003 at 9:28 AM

Absolutely not. The Platinum Club is a very important part of DAZ and we have no intentions whatsoever of closing it. In fact we are putting more and more efforts in developing products for it. You will see an even increased commitment on the part of DAZ and associated artists in adding new products to the PC that may convince even the most resistant community members to join up:)

Thanks to the support of all those involved that help to keep the Platinum Club going (customers, artists etc.)

Sincerely,

Dan Farr
President, DAZ Productions


SAMS3D ( ) posted Thu, 08 May 2003 at 9:40 AM

Okay, I almost past out....thank goodness....news like that can really ruin my day but thank goodness it isn't true....I just love the Plantinum Club. It is one of the best ideas. Sharen


Connatic ( ) posted Thu, 08 May 2003 at 9:47 AM

The Platinum Club is a great deal. It is worth joining just for the LisaB texture/mat sets. -fritz


Crescent ( ) posted Thu, 08 May 2003 at 10:03 AM

I think whoever was murmuring was just yanking your chain. (Thank goodness!)


lordbyron ( ) posted Thu, 08 May 2003 at 10:24 AM

Dan, Thanks for squelching such a vicious rumor. we PCers are grateful. I complain about DAZ from time to time. I feel I should thank you from time to time also. So thanks! lb


SimonWM ( ) posted Thu, 08 May 2003 at 10:30 AM

I love the Platinum Club too. Thanks for clearing that up Dan. Any news on Michael 3?


Ghostofmacbeth ( ) posted Thu, 08 May 2003 at 10:41 AM

Just trying to alieve the fright for peopel rading the message LOL



SkyeWolf ( ) posted Thu, 08 May 2003 at 10:56 AM

I would love to join the platinum club but $100 is a bit steep for me at the moment....any chance of membership going back on sale again???? Pretty please???? With sugar???? :)

Admin: http://www.artistsagainstcensorship.com
Artist: http://www.skyewolfimages.com


greenbd ( ) posted Thu, 08 May 2003 at 11:44 AM

Attached Link: http://www.daz3d.com/products/michael.php

Well, there's this first official mention of Michael 3 at DAZ's web site: "Michael 3.0 is currently under development and will include many of the new groundbreaking techniques and assets introduced through the Victoria 3.0 product, such as: true-to-life body- shaping and contouring, strategic mesh resolution, photo-realistic skin mapping, and asset management. With this upcoming version of DAZ?s Michael model, the creation of animation, film, web design, illustrations, and photo-realism projects will be easier than ever before."


dialyn ( ) posted Thu, 08 May 2003 at 11:46 AM

I think I need to go out and shop for a new mega computer...Daz is going to cause my current one to explode.


wrpspeed ( ) posted Thu, 08 May 2003 at 12:02 PM

well if michael 3 is out when my subscription is up i will renew or if they increase the number of poses or clothes for mike2(unlikely cause of mike3) or more props, scenes, lights. otherwise i may wait until mike 3 is out and hope there is the avalanche there was for vickie3


Ms_Outlaw ( ) posted Thu, 08 May 2003 at 12:12 PM

A 100 bucks US is about 1000 Canadian isn't it? Well maybe not that high, but then having to still buy models at a much lower rate I understand, is just too high for this Canuck.


Disciple3d ( ) posted Thu, 08 May 2003 at 12:15 PM

Dan, I'm so glad to hear that. Regards, Brent

If you want to up your content game, get schooled to be a pro with Sixus1 Mentoring today!


SimonWM ( ) posted Thu, 08 May 2003 at 12:48 PM

Thanks for posting that, greenbd. I'm hoping the versatility of Michael 3 reaches muscular deformations similar to the Hulk movie model. Some people (I think it was Konan) tried to get Mike 2 up to those proportions but there were problems at the hands and foot joints, I guess with poses that change the control joints his versatility could be expanded. Same method used to make Vicky 2 clothes compatible with Vicky 3.


RHaseltine ( ) posted Thu, 08 May 2003 at 1:30 PM
Online Now!

You should get your 30% off DAZ originals at least, as long as you renew while still a member.


MachineClaw ( ) posted Thu, 08 May 2003 at 1:48 PM

If your in PClub, before your subscrition runs out you can purchase it again with the 30% off it's $69 to get. Maybe other discount insentives later on dunno. Anton in another thread had mentioned that they were working on ways to make it easyer for people to get PClub memberships, dunno what that means, but seems like Daz3d is aware of it and working on something. Site has a new look, Daz Studio getting closer and closer, Mimic 2.0 around the corner, seems like a lot of things are in the works and Daz always has a few surpises around too. Later this summer it's gunna be fun I bet. Seems like Anton and Micheal Lane are probably a bit overworked, bless their little modeling hearts.


texboy ( ) posted Thu, 08 May 2003 at 2:23 PM

It's great to see that DAZ monitors this site so closely; you folks have always been most responsive to my minor problems and moronic requests. Thanks a million! all the best, Paul (texboy)


maclean ( ) posted Thu, 08 May 2003 at 2:47 PM

I mean..... come ON, folks! There are people with weak hearts in this forum. mac


Niles ( ) posted Thu, 08 May 2003 at 3:19 PM

How about some Spice... you know something new that does not have Vic3 or Koshini attached to it? Like Mike or good ole Vic2.... *NOTE notice I did not mention MM kids? ;) niles


macmullin ( ) posted Thu, 08 May 2003 at 3:57 PM

I would like to have a hint Dan on how Daz Studio is shaping up and what can the Poser community expect in the price range of the new product when it comes out?


Dizzie ( ) posted Thu, 08 May 2003 at 5:10 PM

Mac, haven't you been keeping up on DAZ Studio posts? The base program will be free and the then there will be separate plugins you can buy as you prefer. Platinum Club closing....NO WAY...that's 1 rumor I would never have believed....I think it's too sweet a deal for both DAZ and us...It's my first choice of places to purchase and even at $1.99 ea. on top of membership fees, I'll bet they're making a ton off the club and rightly so they should too! It's a great place with high quality products!


PabloS ( ) posted Thu, 08 May 2003 at 6:13 PM

Have a follow-up reduced cost enrollement for the PC. There are a few (actually several I think) that missed it due to being unemployed or under other financial constraints that would think about joining up if you would do an encore membership drive.


macmullin ( ) posted Thu, 08 May 2003 at 7:12 PM

I guess I have missed a few posts Dizzie. Where can I read a few new treads to get caught up. Is there any info posted at Daz as well?


kbade ( ) posted Thu, 08 May 2003 at 10:21 PM

There was a press release with the DAZ Studio info up at their site. It was linked on the home page, but with the new site design, you may have to check the new menus.


Dizzie ( ) posted Fri, 09 May 2003 at 12:15 AM

do a search in this forum for DAZ Studio.....:>)


RHaseltine ( ) posted Fri, 09 May 2003 at 6:12 AM
Online Now!

It's going to be "tell ware" - you have to tell two people about it to get it free*. * the return ticket to the depths of the Amazon jungle to find the last people ignorant of D|S may dent your account a little.


LaurieA ( ) posted Fri, 09 May 2003 at 10:12 AM

GAWD! Don't scare me like that!! I ain't had coffee yet. Nearly had a stroke ;o) Laurie



Privacy Notice

This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.