Fri, Nov 29, 6:18 PM CST

Renderosity Forums / Poser - OFFICIAL



Welcome to the Poser - OFFICIAL Forum

Forum Coordinators: RedPhantom

Poser - OFFICIAL F.A.Q (Last Updated: 2024 Nov 29 7:57 am)



Subject: Celebrity likenesses for Gen4 or Genesis - post 'em here


  • 1
  • 2
grichter ( ) posted Thu, 04 October 2012 at 7:17 PM

Quote - > Quote - I could have sowrn I had a V3, SP3 or V4 character that was a likeness of a young Audrey Hepburn circa Breakfast at Tiffnay's time frame. But they appear to be lost in my huge runtimes. Anybody got a clue as to one.

There was Aurelie Pettite here in the RMP, but it's discontinued...

http://www.renderosity.com/mod/bcs/aurelie-petite-for-v4-2/65668

There is a free one over at ShareCG...

http://www.sharecg.com/v/27903/Poser/Tiffany-Girl-for-V4++-&-Morphia

I normally had put by Celeb look-a-like characters in a marked sub-folder in their various runtimes and somehow forgot to do that with Aurelie Pettite, which I have. Now my world is right side up again. Thanks a bunch.

Gary

"Those who lose themselves in a passion lose less than those who lose their passion"


grichter ( ) posted Thu, 04 October 2012 at 7:18 PM · edited Thu, 04 October 2012 at 7:21 PM

Quote - Looks like that might be the General Lee in the back left, actually?

The Green Hornet's car directly behind the Monkey Mobile?

Some people collect cars, others collect female characters, temples and swords for Poser! :blink:

Gary

"Those who lose themselves in a passion lose less than those who lose their passion"


WandW ( ) posted Thu, 04 October 2012 at 9:11 PM

Quote - Looks like that might be the General Lee in the back left, actually?

I think that's Starsky and Hutch's Ford Torino...

----------------------------------------------------------------------------------------

The Wisdom of bagginsbill:

"Oh - the manual says that? I have never read the manual - this must be why."
“I could buy better software, but then I'd have to be an artist and what's the point of that?"
"The [R'osity Forum Search] 'Default' label should actually say 'Don't Find What I'm Looking For'".
bagginsbill's Free Stuff... https://web.archive.org/web/20201010171535/https://sites.google.com/site/bagginsbill/Home


grichter ( ) posted Thu, 04 October 2012 at 10:28 PM

Monkeys, Green Hornet (Black Beauty) and the General Lee were all cars built by George Barris. Not sure about Ghost Busters. But that could be behind the Ghot Busters Car the Munsters car which was another Barris built car. In a previous life I was a gear head.

http://www.barris.com

Gary

"Those who lose themselves in a passion lose less than those who lose their passion"


monkeycloud ( ) posted Fri, 05 October 2012 at 4:43 AM

Ah, that makes sense... presumably Barris' collection, before he sold the MonkeeMobile?


Eric Walters ( ) posted Sat, 06 October 2012 at 9:20 PM

Grichter

You have caught me!

 

Some people collect cars, others collect female characters, temples and swords for Poser! :blink:



RawArt ( ) posted Sun, 07 October 2012 at 9:25 AM

Dont forget the Classics....The Yul counterpart

 

Brennan

 

http://www.daz3d.com/shop/brennan-for-genesis

 

Brennan


Zaarin ( ) posted Fri, 12 October 2012 at 10:53 PM

Quote - > Quote - I could have sowrn I had a V3, SP3 or V4 character that was a likeness of a young Audrey Hepburn circa Breakfast at Tiffnay's time frame. But they appear to be lost in my huge runtimes. Anybody got a clue as to one.

There was Aurelie Pettite here in the RMP, but it's discontinued...

http://www.renderosity.com/mod/bcs/aurelie-petite-for-v4-2/65668

There is a free one over at ShareCG...

http://www.sharecg.com/v/27903/Poser/Tiffany-Girl-for-V4++-&-Morphia

What a pity she's not available any more! She's very pretty; the best Audrey Hepburn likeness I've seen. :( 


smallspace ( ) posted Sat, 13 October 2012 at 11:57 PM

So who is "Madam" supposed to be?

http://www.renderosity.com/mod/bcs/madam-for-v4-2/94899

 

And who is the new, "Temptress"?

http://www.renderosity.com/mod/bcs/temptress-for-v4-2/95896

 

I'd rather stay in my lane than lay in my stain!


MargyThunderstorm ( ) posted Sun, 14 October 2012 at 12:27 AM

Temptress is Eva Mendes. Madam should be Talia Shire.



smallspace ( ) posted Sun, 14 October 2012 at 1:52 AM

Eva Mendes I can see, but I would never have guessed Talia Shire was MADAM.

I'd rather stay in my lane than lay in my stain!


MargyThunderstorm ( ) posted Sun, 14 October 2012 at 2:16 AM

Was just a guess with Madam. I'm not really sure. I thought it's the counterpart of Rocky and she has really similar hair as Talia Shire in Rocky. ^^



Lyoness ( ) posted Sun, 14 October 2012 at 3:36 AM

I heard in some forums that Madam was a russian actress... although I never got a confirmation. I would really like to know who that is!!

I'm not seeing Talia Shire at all in that one.  Sorry Margy.


raven ( ) posted Sun, 14 October 2012 at 3:40 AM

Attached Link: http://www.renderosity.com/mod/forumpro/showthread.php?thread_id=2857892

The linked thread suggests that Madam is Heidi Fleiss.



smallspace ( ) posted Sun, 14 October 2012 at 3:53 AM · edited Sun, 14 October 2012 at 3:57 AM

Quote - The linked thread suggests that Madam is Heidi Fleiss.

 

A real good possibility. However, now that you mention it, to me it looks more like Jamie-Lynn Sigler "playing" Heidi Fleiss!

I'd rather stay in my lane than lay in my stain!


Lyoness ( ) posted Sun, 14 October 2012 at 4:04 AM

The hair has to be part of the identity or it wouldn't have been included.  So, what does a crown braid have to do with this character??


Ridley5 ( ) posted Sun, 14 October 2012 at 7:03 AM

 

Madam is not Talia Shire or Heidi Fleiss. The character is based on the Russian celebutante and model "Madam Olga".  I asked Odnajdy about this when Madam was first released.


grichter ( ) posted Sun, 14 October 2012 at 7:09 AM

Quote - So who is "Madam" supposed to be?

http://www.renderosity.com/mod/bcs/madam-for-v4-2/94899

 

Madam is Madam Olga who is famous in Russia is what I was told

Gary

"Those who lose themselves in a passion lose less than those who lose their passion"


smallspace ( ) posted Mon, 15 October 2012 at 12:53 AM

She may be famous in Russia, but she's nowhere to be found in a Yahoo search...

I'd rather stay in my lane than lay in my stain!


Lyoness ( ) posted Mon, 15 October 2012 at 1:07 AM

yeah..l searched google and couldn't find her.


DCArt ( ) posted Mon, 15 October 2012 at 1:37 AM

His celebrity morphs are some of the most amazing that I have ever seen. The Will Smith and Wesley Snipes morphs are absolutely stunning.



GhostWolf ( ) posted Mon, 15 October 2012 at 4:29 AM

Hmm, I thought that "MRL Riley" character made by Mihrelle resembled (a bit) like Tricia Helfer, who played Number Six in Battlestar Galactica?


smallspace ( ) posted Wed, 08 May 2013 at 12:07 PM

Reviving an old thread here to see if anyone knows who odnajdy’s new character, “Fun-Loving Stranger” is supposed to be?

I'd rather stay in my lane than lay in my stain!


R_Hatch ( ) posted Thu, 09 May 2013 at 4:41 AM

Content Advisory! This message contains nudity

She's not based on anyone famous. Also, it looks like she may be his last product here :( Hopefully that just means he's switching stores. He makes excellent products.

Attention mods: the link below is NOT a warez site, it is a Russian-language Poser/3d forum.
Nudity at link below - same promo images from Marketplace.
Source: http://poser.kiev.ua/index.php?showtopic=19636

Google translation of relevant post:

Quote - "Totally unplanned and very possibly my last product on R-city ......
It's not a star, you can not guess, just a young lady.
Trestle on one of the images - from Anton Hent-a (hameleon), thank you!"


smallspace ( ) posted Thu, 09 May 2013 at 5:13 PM

Ok...thought it must be someone famous, given odnajdy's history of celebrity look-a-likes.

I know odnajdy got in legal trouble with the "Red" character. Now I look at my purchase downloads and see that all the odnajdy celebrity packages I purchased were just all updated April 22nd. I haven't downloaded any of the updates yet, so I'm wondering why so many packages would need to be updated at the same time. I've come up with 2 possibilities:

  1. They're all being updated for some compatibility issue the latest version of Poser or DAZ Studio.

  2. The morphs in each package have been altered to make them look a little less like the celebrities, and therefore avoid legal problems.

I don't think it likely they had to be updated because of errors or problems with the packages, I mean, if that were so, how likely is it that all those different packages would need to be updated at the same time.

I'd rather stay in my lane than lay in my stain!


Male_M3dia ( ) posted Fri, 10 May 2013 at 6:43 AM

Quote - Ok...thought it must be someone famous, given odnajdy's history of celebrity look-a-likes.

I know odnajdy got in legal trouble with the "Red" character. Now I look at my purchase downloads and see that all the odnajdy celebrity packages I purchased were just all updated April 22nd. I haven't downloaded any of the updates yet, so I'm wondering why so many packages would need to be updated at the same time. I've come up with 2 possibilities:

  1. They're all being updated for some compatibility issue the latest version of Poser or DAZ Studio.

  2. The morphs in each package have been altered to make them look a little less like the celebrities, and therefore avoid legal problems.

I don't think it likely they had to be updated because of errors or problems with the packages, I mean, if that were so, how likely is it that all those different packages would need to be updated at the same time.

All the morphs have been altered, so if you have the original morphs I suggest you store them somewhere safe and don't use them in any commercial renders.


TrekkieGrrrl ( ) posted Fri, 10 May 2013 at 7:39 AM · edited Fri, 10 May 2013 at 7:41 AM

file_494311.jpg

I've done a reasonably good Tim Roth morph (If I may say so *L*) and I'll gladly share it. I just need to find the best way since it's a mix of morphing brush morphs and the Morphs++. Do people still use RTEncoder? I've been away for so long it's not even funny *L*

 

I looked through this and may have missed it, but.. has anyone done Kelli Williams? (Lie To Me, Army Wives ect...)

FREEBIES! | My Gallery | My Store | My FB | Tumblr |
You just can't put the words "Poserites" and "happy" in the same sentence - didn't you know that? LaurieA
  Using Poser since 2002. Currently at Version 11.1 - Win 10.



smallspace ( ) posted Fri, 10 May 2013 at 12:17 PM

Hi TrekkieGrrrl!

 

If it's a custom morph, I'd save the morphs as a pmd file. Just make sure you haven't used any commercial morphs along with it.

I'd rather stay in my lane than lay in my stain!


TrekkieGrrrl ( ) posted Fri, 10 May 2013 at 7:25 PM

Thing is: I have. It's for a large part the Morps++-morphs. That's why it need to be encoded somehow :)

FREEBIES! | My Gallery | My Store | My FB | Tumblr |
You just can't put the words "Poserites" and "happy" in the same sentence - didn't you know that? LaurieA
  Using Poser since 2002. Currently at Version 11.1 - Win 10.



monkeycloud ( ) posted Sat, 11 May 2013 at 12:40 AM · edited Sat, 11 May 2013 at 12:41 AM

Quote - Thing is: I have. It's for a large part the Morps++-morphs. That's why it need to be encoded somehow :)

Can you not just make ++ morphs a verbally stated prerequisite... same as many marketplace products etc?

The pose file would just set the values on the ++ morph channels, that the end-user already has installed to M4?

Your custom sculpt would just be added as a new morph, on top of that, then, on a separate channel?

What was your workflow to get the custom sculpt / what did you use for it? Is the problem that ++ morphs are frozen into your custom morph... like a mixdown into one channel?


  • 1
  • 2

Privacy Notice

This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.