Looking good.
Keep up the good work.
It will be nice to see the complete set. :)

I havent done this before and im trying projection painting. it takes ages lol

bluecho you make such nice textures:) its hard to remove all the highlightes on the photographes i think but i have found a away i think wich gives decent results.

The morphs require the use of Cage's "morph_slot_maker1g.py" (MSM), which is bundled with the package. I'm very excited about this py script. What it does is to create new blank targetGeom (morph) channels with custom internal names. Thus it allows morphs to be injected into any figure what so ever.

Here is a list of the morphs included in the package:

Eyes
     Blink R
     Blink L
     LidTop R
     LidTop L
     LidBottom R
     LidBottom L
Brows
     Brows Together
     Brows Up-Down
     Brows Inner Up-Down
     Brow Up-Down R
     Brow Up-Down L
     Brow Tip R
     Brow Tip L
Mouth
     Mouth_Open_03a_MJ
     Smile-01
     Smile-02
     Smile-03
     Smile-04
     Frown-02
     Mouth Corner L
     Mouth Corner R
     Mouth Width
     Lips Thin-Thick
Cheeks
     Cheeks Puff
Chin
     Chin Down-Up
     Chin Side-Side
     Chin Out-In
Nose
     Nostril Flair

Now that I see those mismatching toungue and teeth textures again I think over redoing them as well. But I hope you all understand when I wait and see what odf says about this issue. If he decides that this will be the mapping in the final version I will update my texture set as well.

And thanks for all the new goodies - poses, expressions and so on. I like new toys

I have found a glitch in the 125 jawLower. The x orientation of the jaw is -41.1816. This causes the jaw to rotate in respect to world z when yrot is used on the jaw. A real jaw only swings from side to side, and up and down, without any rotation around z. I think the x orientation should be set to zero. There is a similar situation with the jawUpper.

Great find, Les! Thanks for that!

Sorry for being so quiet lately! I have a bad internet connection at my mother's place which has an annoying tendency of disconnecting me just when I try to post.

Wow, thank you sooo much!

Now folks can download these and my Akasha set for a bit of Halloween fun.

I'm going to use these fangs on Toni too. :)

Quote -
In keeping with the season, I have uploaded a set of Fang morphs to Antonia's Free Site.

Nice teeth!  Antonia need a vampire costume, too.

Attached Link: Trick or Treat?

i attached an image.

Once its done, ill upload to the free resource site

thanks so much she looks really good ans subdivides and scupts nicely in zbrush. Now I just need a male figure with just as great topology

Joe

I'm still trying to finish the texture set that had about 5  or 6 different skin tones using shaders.
Something happened and they didn't come out right so I'm re-adjusting them.

Guess I did a boo-boo again...sigh.

That will give me two retail set, I think.

grats: she is perfectly poseable where she should be. normally you cant bend the knees by selecting the lower leg or spread them by the upper leg. you got it right and I greatly appreciate all the work you put it as it made my life 100 times easier.

Cons: would like to see a nicer breast morph I can enlarge them and do the nipples but I personally think the breast could enlarge slightly more and have a morph to push them closer together or fartehr apart. the way it is now for making a nice busted fantasy warrior you dont get that cleavage like when you put clothes on them that pushes the breasts together.

That being said it doesnt affect me too much as I can use zbrush to fix that but figured would give an honest crit for you

Joe

Heres something I am working on with her. as soon as I get her posed I will put a spear in her right hand and then work on the bears armour and her outfit after I do some sculpting in zbrush will bring her into max and add hair and fur and render her trying for a really photorealistic look. thats why I been looking for a good male and female toon and now have the female and when whats his name finishes his male i will be a happy camper

I like the pose you have her in and your ideas are great.

Mmmh, armoured bears! :laugh:

I seem to remember seeing some breast morphs for Antonia, but I couldn't say where to find them. It's usually hard enough for me to keep track of the stuff I made myself. A nice, extensive (no pun intended) set of breast morphs that play well together is definitely on my to-do list, somewhere, but unfortunately I still have a lot of work ahead of me just to cover the bases.

Yes, it can be hard to remember where you've seen the goodies posted.
It would be a great if all the content makers would put them on the free site.
It's really easy to do, link in the banner below. :biggrin:

After I finish the free mini tee shirt and halloween bodysuit, Ill upload  them there.

great, thanks. :)

Some breast morphs were included with Antonia 118.  These are loaded onto the Batgirl character available at the "Antonia Stuff" link in my sigline.

yeas the ones I have enlarges the breasts a little bit and pokes the nipples out some I was suggesting allowing for bigger breasts and a way to move them closer to the middle or outside so that you can get that buxom bosom look you see in a lot of fantasy characters

Joe

Quote - Some breast morphs were included with Antonia 118.

Ah, I seemed to remember something like that. Those would have been in the body morphs package by Jules53757, then. If there's enough demand, I could test them for the current Antonia (some will require the BreastsClassic and/or NipplesClassic morphs to be set to 1 to work correctly), then re-package and re-upload them.

I'll be posting the hallowwen suit tonight. Sorry if its not as advanced as some clothing items. I dont know how to make smoothing morphs.

Its now live at bluecho's website.

Great, I'll go download it soon.
Thanks.

Welcome. Hope you like it. If you have any comments, feel free to express them.

@ edgeverse,

1. Never compress your files, it makes it a PITA for others (and yourself) to fix any cockups that are in them.
2. To avoid someone like me from being ready to rip your head off :tt2: always check the pathways in the file are correct, yours aren't which makes 1 an even bigger PITA.
3. If your going to do a straight rip of a mesh for a skinsuit, don't merge the material zones into one, you now have 3 zones overlapping each other, that's a nightmare for anyone making textures for it.

If you mean the path like runtimeetc,
those are right
runtimelibrariescharacterAntoniaHalloween
its right

I uncompress it and reupload.

And like i stated in earlier posts, this is by far not perfect.

It's a straight rip of the mesh? Why bother then? I didn't look at anything but the render above so perhaps I'm not responding to how it actually is, but...

I can make a similar skin suit by loading a second copy of the figure and conforming it to the first.

A suit should not track the mesh exactly. Cloth goes across the belly button, not in. Across the breasts, not in. Across the butt, not in.

Thanks, Bill. Well put. Great feedback,

If your paths are correct then why is mine looking in "Runtime:Libraries:Characters:SS_Sixus:Halloween.obj"

Nods at BB's response, that's what I was doing a couple of pages back, copied toni's cr2 and removed the bones for the limbs & head, add a morph to flatten the navel, another one to push out the gen crease then add a little displacement to push it from the body. Still got a chest spandex to do and to redo the ass spandex, :biggrin: ODF's JCMs didn't play nice with the first one, poor girl looked like she'd soiled herself in some of her more extreme poses :lol:

oops my bad.
Ill fix it asap.

I didnt wanna post the screen here to get off topic but started my  antonia bear rider project here http://www.cgsculpt.org/sculpt/viewtopic.php?f=6&t=529&p=5194#p5194

I got most of the general base peices done now starting to come up with some kind of clothes for antonia. I am lousey making clothes lol

Joe

Makes two of us profoolery. Ill stick to second skins and textures and selling them at CP>

Working on a short dress here.
Slooowly.
Weather still too good again today to lock myself inside slaving at a monitor screen.

It seems you all are stuck in strick rules Vicky mode.
Antonia's open sorce more or less ,does not have strick rules.

It's hard for me to go from 3D mode to Comic mode.
So I get the difficulty of changing modes.

You could just morph Antonia body to a body suit.
Sence Antonia not boged down buy strick rules ,Is there realy a need for a separated body siut ?

If you have Zbrush seems you would have all the breast morphs and any other morphs ya would ever need.

Quote - It seems you all are stuck in strick rules Vicky mode.
Antonia's open sorce more or less ,does not have strick rules.

It's hard for me to go from 3D mode to Comic mode.
So I get the difficulty of changing modes.

You could just morph Antonia body to a body suit.
Sence Antonia not boged down buy strick rules ,Is there realy a need for a separated body siut ?

If you have Zbrush seems you would have all the breast morphs and any other morphs ya would ever need.

For those who have Zbrush or who know how to create good body morphs i agree, life is sweet. But many of us who don't own Zbrush or who have struggled with learning how to create morphs without success, life sucks when body morphs aren't incorporated into a figure...commercial or opensource.
The more there is available for a figure the more fun will be the posing/rendering experience for the rest of us consumers.
There are times when an extra Cr2 (body Suit?) are just what was needed. There are times when there just isn't enough resource memory for an extra Cr2 so being able to use the zones on the figure and the body morphs to colorize texture her and morph the body to look like she is wearing a body suit are even better. The best case scenario in my opinion is offering both and let us decide how we will use the resource.

The rules for Vicki seem to me to be the same rules that have applied to all figures since poser4. It has worked as a baseline target of conformity why not continue? It is what ODf has done within those confines of conformity that will make characters like Antonio SHINE!....or die....:)

just wanted to make a note I found a non welded spot in the base of her neck in the back that created a hole in the neck when I subdivided it. its nothing bad but this way allows you to fix it if you so choose.

Joe

Quote - just wanted to make a note I found a non welded spot in the base of her neck in the back that created a hole in the neck when I subdivided it. its nothing bad but this way allows you to fix it if you so choose.

Joe

When I import the obj file in Wings3d, there's no hole. But every program interprets groups and materials differently. Make sure to use the correct import options, and if necessary, use UVMapper or such to clean the file beforehand.

I haven't used ZBrush for a long time, so I can't be more specific. But I'm sure there'll be tutorials around.

ok no problem I just imported into max as a single group and everything welded fine but that 1 spot. which is really no biggy but thought would point it out. hell I cant even figure out how to find anything in poser. I just do the runtime copy and figure it all goes where it is supposed to but I get clothes and inj and rems in my pose thing and I cant even find those vamp teeth I put in. I would love to clean this crap up but dont even have the first idea on how to start lol.

they need one for figures and poses etc then another menu for morphs and one for clothes  added too. I been spending the morning trying to find tutorials on how to organize your crap.

after I spent time in line to get my ozzy ozbourne with slash opening tickets )))

If you export from Poser (which I assume you're doing), make sure to check "weld body parts" and nothing else. I'm not sure I understand correctly, but it's sounded like you export from Poser unwelded, and try to make Max do the welding on import. If Poser rounds some vertex positions inconsistently on export (which, knowing Poser, is almost a given), there's a certain chance that Max may miss something.

no I weld coming out of poser but when it comes into max it comes in as seperate pieces unless you check the import as a single mesh. thats always got me is it comes out as welded but comes in seperate unless you check the box.

its no biggy for me though as I am used to the export import thing but occasionally if a vertice is slightly gapped from the other it doesnt like to weld occasionally. like I said I am just pointing out things i found that happened to me to give you a heads up. I am totally happy with the character as I can easily work with it but others may not be so well versed as I am when doing the export import thing

Joe

Just checking in, been gone a couple of days.

I am working on a custom face morph and will try to get back with it tonight.
I'll post images as the work progresses.

This one may be a freebie. :)

I just got side-tracked when the brother called and said he was heading up here to pick me up and go back to Berger.
We looked at two houses in one day...I am tired.

Anyway here is the image, front and side view of the morph.
I changed the nose, cheeks, lips and chin a bit.
Then I did a wee bit of altering on her upper and lower eyelids and gave her some cute little dimples.

All morph-work was done with the putty tool in Poser 7.

Soon I want to do some ear morphs to see if I can. :)

There is one morph for the eyes, one for the eyelashes, one for the nose, one for the lips, one for the lower face, one for the upper face and one full face morph.

Some of the dials load with the dial set at 1 and some at zero.
you may want to play with they settings to suit yourself.

Edited: forgot to load the image and forgot to say that the hair used is the Raven MoHawk.
I've lost the read-me on this laptop.