Forum Moderators: wheatpenny Forum Coordinators: Guardian_Angel_671, Daddyo3d
DAZ|Studio F.A.Q (Last Updated: 2024 Dec 03 10:39 am)
Quote - Any advice for those of us who may wish to try to convert this for use with the DSON Importer?
Unfortuantely, I have to admit that I havent mucked around with the DSON stuff yet. I will be talking a look at it in a couple of weeks as I begin a more significant shift into the Poserverse.
The supersuit is based wholly on the genesis figure and there is really very little diference between it and Genesis itself... as a mesh. What makes it problematic is all the material zones.
Ill be looking into it for my own curiosity and Ill let you know. Hopefully it will be fully supported soon.
Quote - Here's the second UV. As you can see, it's been messed up since Launch and DAZ has done nothing to fix this.
One great thing about DAZ Studio 4 is that it allows for different UV sets that can be switched out at will.
Its not a terribly difficult thing to create your own UV map in a program like ZBRUSH or Blacksmith3D.
The basic suit was "thrown in" as a bonus freebie because DAZ had it and even as it is it is better than not having it.
It was hoped that some enterprising PA or third party would "fix" it... but that hasnt really happened.
I know this isnt the answer you wanted... but I dont work at DAZ anymore and I have no idea if or when it would even be considered for fixing. I suppose if enough people asked they might take a go at it.
One thing I could recommend is that if anyone reading this knows of someone with the skill to take it on or has those skills themselves, this is a great opportunity to make some extra money by selling it to DAZ... just an idea.
-EDIT-
Just to clarify... its not hard to make a custom UV for your own custom 3D paint setup... it IS a bit more difficult to create a UV that will allow for creation of seamless texturing in photoshop.
Quote - Hi Randall
did you do the videos regarding the supersuit and if so will you be doing anymore, I think they were on vimeo? I watched them all and they were really good, but was told the maker was not with daz anymore.
Kharma
Yes that was me... thanks.
Watch this space for more like it in the future.
here is a link to the original post on the DAZ forums where the video links are available.
http://www.daz3d.com/forums/viewthread/601/
Quote - > Quote - Any advice for those of us who may wish to try to convert this for use with the DSON Importer?
Unfortuantely, I have to admit that I havent mucked around with the DSON stuff yet. I will be talking a look at it in a couple of weeks as I begin a more significant shift into the Poserverse.
The supersuit is based wholly on the genesis figure and there is really very little diference between it and Genesis itself... as a mesh. What makes it problematic is all the material zones.
Ill be looking into it for my own curiosity and Ill let you know. Hopefully it will be fully supported soon.
Thank you, Randall. I have started converting it to DSON, and so far it seems to be going well. Don't know how I'll handle texturing when I'm done, but we'll see. I'll come back here and share the results of my efforts.
Hey! Glad to see you around again! I never visit the Rendo site (or forums) but somebody linked me to the thread and I had to at least say Hey!
I still love the suit! I have been focused on other things and haven't gotten to play in awhile, but I'm still trying to figure out what to do with my presets I had made... I'm having on awful time with my internet (still dialup) and didn't know if I could try to submit to somewhere to sell or not. I have some other designs I had done and want to turn into presets eventually too when I have the spare time :)
In all this time, I don't think I've ever attempted to use the Basic suit still o.0 Too much fun stuff to do with the supersuit! LoL
Attached Link: Workaround overlapping UVs in DAZ Studio
> Quote - Here's the second UV. As you can see, it's been messed up since Launch and DAZ has done nothing to fix this.
Ok, so here is a little something that might help you in the short term.
Attached Link: Workaround Overlapping UVs in DAZ Studio
> Quote - Here's the second UV. As you can see, it's been messed up since Launch and DAZ has done nothing to fix this.
I deleted that Video because it was a bad upload.
try this one
http://youtu.be/MevnA4Wkkx8
On deselecting polygons by material - if you have the space, open the Tool Settings pane. With the Polygon Seelction tool active that lists all of the polygon groups (actual groups, material zones and so on) with a + next to each to select it and a - to deselect - if you overflow when selecting then the unwanted material zone will have a solid - next to it and you can just click that to deselect the overflow polygons as randy did with the context menu, without needing to know the material name (and looking for solid -s can cue you to overflow selections in the first place).
On saving - in 4.5 save as a scene subset, not a full scene, or the default behaviour (when you double-click) will be to replace the current scene, rather than merge in (it will prompt you to save your current scene, so you won't lose work, and you can right-click rather than double-click to get Merge, but it's still annoying). You could also save the modified suit as a new Figure Asset (File>Save as>Support Asset>Figure Asset) but then you lose the compatibility info forsmart content, which may be annoying if you use that.
Quote - On deselecting polygons by material - if you have the space, open the Tool Settings pane. With the Polygon Seelction tool active that lists all of the polygon groups (actual groups, material zones and so on) with a + next to each to select it and a - to deselect - if you overflow when selecting then the unwanted material zone will have a solid - next to it and you can just click that to deselect the overflow polygons as randy did with the context menu, without needing to know the material name (and looking for solid -s can cue you to overflow selections in the first place).
On saving - in 4.5 save as a scene subset, not a full scene, or the default behaviour (when you double-click) will be to replace the current scene, rather than merge in (it will prompt you to save your current scene, so you won't lose work, and you can right-click rather than double-click to get Merge, but it's still annoying). You could also save the modified suit as a new Figure Asset (File>Save as>Support Asset>Figure Asset) but then you lose the compatibility info forsmart content, which may be annoying if you use that.
Yes! Thanks a lot for those tips Richard... I will amend the video to include your great advice.
Attached Link: Supersuit Tips and Tricks Episode 1: Using the suit for clothing deformation
Ok... so here is another fun video for you guys.
Enjoy!
Attached Link: Supersuit Tips & Tricks Episode 2: Creating Super Emblems for the Supersuit.
Here is one of the most requested videos I have received.If its not too much trouble, could one of you repost links to these vids on the DAZ forum somewhere? There is a superhero render thread somewhere. I am still not allowed to post in the DAZ forums even though I have never actually been banned.... at least not for anything I deserved. its very strange.. ::
I'll post them for you, Randy. I posted a link to this thread over there. Don't understand why they won't let you post. Maybe contact someone?
edit-looks like anikad beat me to it mostly :) I added the 2 new ones to another thread where anikad had posted the first.
Thanks for the newest one - heading out for a bit but I'll take a look at it later!
Cheers,
Alisa
RETIRED HiveWire 3D QAV Director
Attached Link: Supersuit User Guide Part 1: Locate and Load
Ok... ive started to Remake the original Tutorials. Here is the first.Attached Link: Supersuit User Guide Part 3: Presets - Full Suit Shaping Presets
Bummer, I wish I could edit the post to fix it.
Here is Number Three
Well in my case, It was time to go and focus on my own business since my vision don't fit so well with other's visions .. what else to say
well I am happy since
but to make it clear, I ended the agreement on my own request
I am missing my old DAZ people and since mostly all are gone or vanishing in silence it was time for me also, I guess from the same reasons ... you know ;) lol
Quote - > Quote - Hi Randy nice to see you back :))
Cath
Same to you Cath... i saw your email about the store and I was wondering what was up and how you were doing.
_________________________________________________________
"Surrender to what it is - Let go of what was - Have faith in what will be "
Attached Link: Supersuit Tips & Tricks Episode 3: Separating and Saving Out Parts of Full Presets
Here is a new videoIn this video I will show you how to load a full body preset and then save out only a part of it as a separate regional preset that can then be applied to any other supersuit shape.
The example in this video is saving out the supersuit trooper helmet as a separate regional preset for later use.
There was a specific question about this on the DAZ forum and some guy posted a long version of how to do it by editing the text file... certainly NOT the best way to go about it. Hopefully this will help
Attached Link: Supersuit Tips & Tricks Episode 5: Using preset shapes to create separate props
Ok... i skipped #4 for some reason. Here is number 5In this video I will show you how to select a portion of the supersuit and export it for use as a separate prop.
The example in this video is saving out the supersuit trooper helmet as a new object.
Yeah, this is where Mac and PC are weirdly different. On Mac, every regular left click is additive and you cant remove polys from your selection. On PC you must hold down a modifier key to add to the selection... i think its control, but it could be alt. play around with it and see. the other key will allow you to remove polys from your selection. I dont have a PC to test with at the moment so maybe someone can clarify that for me.
when you rotate, use the camera cube and be safe :D
selected polygons will stay selected on the item or figure you have selected, even if you temporarially move to a different one and come back or even switch tools for a bit and come back. Try to get out of the habit of clicking in the viewport to select your figure when using this tool... use the Scene tab for that.
This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.
Hey all. I am available here to answer questions you may have about the Supersuit product from DAZ. How it works, how to get it to do what you want it to, tips and tricks etc...
Let me have it.