Forum Coordinators: RedPhantom
Poser - OFFICIAL F.A.Q (Last Updated: 2024 Dec 22 10:18 pm)
Quote - Downloading it right now. I have been looking for a decent example of a horse for some future renders, and this seems to fit the bill. I'll post a few test renders when I finally get my new computer straightened out.
C~
Cool. I'm not aware of any other new/updated horse that will work with Poser so I'm very interested.
W10, Ryzen 5 1600x, 16Gb,RTX2060Super+GTX980, PP11, 11.3.740
A word is not the same with one writer as with another. One tears it from his guts. The other pulls it out of his overcoat pocket
Charles Péguy
Heat and animosity, contest and conflict, may sharpen the wits, although they rarely do;they never strengthen the understanding, clear the perspicacity, guide the judgment, or improve the heart
Walter Savage Landor
So is that TTFN or TANSTAAFL?
Now to test some DAZ horse acc.
A word is not the same with one writer as with another. One tears it from his guts. The other pulls it out of his overcoat pocket
Charles Péguy
Heat and animosity, contest and conflict, may sharpen the wits, although they rarely do;they never strengthen the understanding, clear the perspicacity, guide the judgment, or improve the heart
Walter Savage Landor
So is that TTFN or TANSTAAFL?
A word is not the same with one writer as with another. One tears it from his guts. The other pulls it out of his overcoat pocket
Charles Péguy
Heat and animosity, contest and conflict, may sharpen the wits, although they rarely do;they never strengthen the understanding, clear the perspicacity, guide the judgment, or improve the heart
Walter Savage Landor
So is that TTFN or TANSTAAFL?
The problem I had with the daz tac was that the head gear never fit the horse very well. The mouth bit would not be "in" the horses mouth...also the stirrups had to be streched and twisted so that they would meet up with the rider's feet. Otherwise the rider would be in awkward looking non-realistic poses.
W10, Ryzen 5 1600x, 16Gb,RTX2060Super+GTX980, PP11, 11.3.740
A word is not the same with one writer as with another. One tears it from his guts. The other pulls it out of his overcoat pocket
Charles Péguy
Heat and animosity, contest and conflict, may sharpen the wits, although they rarely do;they never strengthen the understanding, clear the perspicacity, guide the judgment, or improve the heart
Walter Savage Landor
So is that TTFN or TANSTAAFL?
I think I saw and downloaded a free horse set here in the free stuff called the ArmaVision Horse.It is based on the P4 horse but with extensive re boning and texturing etc. Has a lot of stuff for it in the free section. I have tried it and it is better than P4 horse though not as good as the MilHorse (1).
http://www.renderosity.com/mod/freestuff/?item_id=59377
Quote - The problem I had with the daz tac was that the head gear never fit the horse very well. The mouth bit would not be "in" the horses mouth...also the stirrups had to be streched and twisted so that they would meet up with the rider's feet. Otherwise the rider would be in awkward looking non-realistic poses.
Took me forever to finally install and start using the MilHorse (v.1) and I wish i had done so sooner. I love it. I have had no real big problems with the tac for it. I do know you have to conform before you mess with any other dials. But honestly I hate most conforming clothes and hair. Never really work great most of the time.
Quote - It's a bit stumpy-looking for me. Maybe there are some morphs to fix that. From looking at the Hivewire thread a while ago I didn't like the shape of this too much compared to the Mil Horse (even if the neck bend is better), but agree it would be worth it for the mane and tail!
Not sure i understand. What is wrong with the MilHorse 1 mane and tail?
I think they pose, texture and render pretty well.
I guess I must be comparing it to the old P4 horse which I hae been scraping by until recently. :(
Quote - > Quote - It's a bit stumpy-looking for me. Maybe there are some morphs to fix that. From looking at the Hivewire thread a while ago I didn't like the shape of this too much compared to the Mil Horse (even if the neck bend is better), but agree it would be worth it for the mane and tail!
Not sure i understand. What is wrong with the MilHorse 1 mane and tail?
I think they pose, texture and render pretty well.
I guess I must be comparing it to the old P4 horse which I hae been scraping by until recently. :(
The textures are pretty terrible in a large render and the (not sure how to describe) detail (?) of the model isn't very good or realistic. I have to overpaint them when I use the Mil Horse and I'm very sick of doing that. Even retexturing them doesn't help too much. If I could put the new Hivewire mane and tail on the Mil Horse I might get something I like. Maybe.
Quote - > Quote - > Quote - It's a bit stumpy-looking for me. Maybe there are some morphs to fix that. From looking at the Hivewire thread a while ago I didn't like the shape of this too much compared to the Mil Horse (even if the neck bend is better), but agree it would be worth it for the mane and tail!
Not sure i understand. What is wrong with the MilHorse 1 mane and tail?
I think they pose, texture and render pretty well.
I guess I must be comparing it to the old P4 horse which I hae been scraping by until recently. :(
The textures are pretty terrible in a large render and the (not sure how to describe) detail (?) of the model isn't very good or realistic. I have to overpaint them when I use the Mil Horse and I'm very sick of doing that. Even retexturing them doesn't help too much. If I could put the new Hivewire mane and tail on the Mil Horse I might get something I like. Maybe.
How big do you render?
I work at 3000 x 3000 at 300 lpi and it looks nice enough?
So the tail and mane are seperate files on the Hivewire horse afterall?
Quote - > Quote - > Quote - > Quote - It's a bit stumpy-looking for me. Maybe there are some morphs to fix that. From looking at the Hivewire thread a while ago I didn't like the shape of this too much compared to the Mil Horse (even if the neck bend is better), but agree it would be worth it for the mane and tail!
Not sure i understand. What is wrong with the MilHorse 1 mane and tail?
I think they pose, texture and render pretty well.
I guess I must be comparing it to the old P4 horse which I hae been scraping by until recently. :(
The textures are pretty terrible in a large render and the (not sure how to describe) detail (?) of the model isn't very good or realistic. I have to overpaint them when I use the Mil Horse and I'm very sick of doing that. Even retexturing them doesn't help too much. If I could put the new Hivewire mane and tail on the Mil Horse I might get something I like. Maybe.
How big do you render?
I work at 3000 x 3000 at 300 lpi and it looks nice enough?
So the tail and mane are seperate files on the Hivewire horse afterall?
I work at very large sizes. Most commercial Poser textures are not high enough res or realistic enough for what I need. The Mil horse is pretty bad and I hate retexturing organics.
I don't know if the Hivewire tail and mane are separate figures. That's what I was asking. It says something about them being conforming figures, so I wondered if it might be possible to use them on other figures.
I ran the textures through scene fixer and easyskin2. I also used my own eye'surface/cornea texture that I use on all my models.
W10, Ryzen 5 1600x, 16Gb,RTX2060Super+GTX980, PP11, 11.3.740
Quote - I really like this horse, from what I've seen of the promos so far. Very nice work. I might actually spring for this one. I agree on the main and tail and I especially like the long hair around the ankles. No one ever thinks to include that.
~Shane
they are called feathers and the milhorse1 has them too.
Quote - not really thrilled with the burnt in highlights....I guess it's real difficult getting source photo's for a horse. Pretty decent looking. The mane and tail hair are 100 times better than the mil horse. Hope they make some more textures and try to paint out the highlights.
I ran the textures through scene fixer and easyskin2. I also used my own eye'surface/cornea texture that I use on all my models.
persnally the horses eyes look awful. they don't look like eyes atball let alone a horse's eyes....looks like the are dialed too far off center or something.
Out of the box a lot of figures shine way too much. Not sure why but I always seem to have to reset all that to get it looking right but I have also seen horse's coats ths shiny too.
Also not seeing the mane or hair so can't get a decent comparison.
what you are seeing on my render is the cornea reflecting the envirosphere. here is a closeup of the default eye and my version.
W10, Ryzen 5 1600x, 16Gb,RTX2060Super+GTX980, PP11, 11.3.740
Quote - > Quote - > Quote - not really thrilled with the burnt in highlights....I guess it's real difficult getting source photo's for a horse. Pretty decent looking. The mane and tail hair are 100 times better than the mil horse. Hope they make some more textures and try to paint out the highlights.
I ran the textures through scene fixer and easyskin2. I also used my own eye'surface/cornea texture that I use on all my models.
persnally the horses eyes look awful. they don't look like eyes atball let alone a horse's eyes....looks like the are dialed too far off center or something.
Out of the box a lot of figures shine way too much. Not sure why but I always seem to have to reset all that to get it looking right but I have also seen horse's coats ths shiny too.
Also not seeing the mane or hair so can't get a decent comparison.
what you are seeing on my render is the cornea reflecting the envirosphere. here is a closeup of the default eye and my version.
Seeing it up close I can see the difference but how many closeups of horse eyes will I do to concern myself about thie highlight in the eye? None I dare say?
I am more interested in texture stretching and distortion in realistic extreme poses. I want to know about this mane and tale issue. Is the horse a complete unit out of the box or do you need to get additional breed morphs and other stuff we need to get to fill out anything we usully get from DAZ.
Will it work in Poser 7 or is it set up to only work in newer versions of Poser and/or D/S?
Thanks. I guess it isn't ready for prime time for me yet.
Been doing a lot of work with the MilHorse and am addicted in wheel spinning to create expressions and morphs but mostly breeds. I use all the different textures out there besides DAZ originals for variety. Since I don't do too mny Close-ups of animals or human portraits all the things discussed here are moot for me at this time.
Did you find out btw if the tails and mane are seperate items with the figure or connected?
I use a lot of the anthropomorphs for M4 and V4 by Philosophers Dream and accessories like manes and tails and even feathers for lower legs (which I am desperate to find right now) to use on other creatures by Ali are much to my interest. If I could get those items seperate with the package , I would buy the horse just to get them.
Quote - they are called feathers and the milhorse1 has them too.
Ah, gotcha. Thanks for clarifying. I figured there was a different word for it but I'm not up on my horse terminology. I don't have any of the daz horses. just the poser horses, which are quite sad without doing some serious work to them.
~Shane
Quote - > Quote - they are called feathers and the milhorse1 has them too.
Ah, gotcha. Thanks for clarifying. I figured there was a different word for it but I'm not up on my horse terminology. I don't have any of the daz horses. just the poser horses, which are quite sad without doing some serious work to them.
~Shane
If you are interested there is still a lot of stuff out there for the old P4 Horse. Mouth open morphs and teeth props set, poseable stringier hair, cloven hoof morphs and horse shoes, there is a mane prop out there not great but it works better than the on-board useless mane they have. Better textures, Lynn I think has a bunch of breed morphs and even some hi res textures for it. Just to get the old nag a bit more umph!
http://hivewire3d.com/hivewirehorse.html
is this what you wanted?
W10, Ryzen 5 1600x, 16Gb,RTX2060Super+GTX980, PP11, 11.3.740
Quote - http://hivewire3d.com/hivewirehorse.html
is this what you wanted?
yes thanks. does look nice. did you get the horse and the pose pack and free pose pak too?
Quote - > Quote - > Quote - they are called feathers and the milhorse1 has them too.
Ah, gotcha. Thanks for clarifying. I figured there was a different word for it but I'm not up on my horse terminology. I don't have any of the daz horses. just the poser horses, which are quite sad without doing some serious work to them.
~Shane
If you are interested there is still a lot of stuff out there for the old P4 Horse. Mouth open morphs and teeth props set, poseable stringier hair, cloven hoof morphs and horse shoes, there is a mane prop out there not great but it works better than the on-board useless mane they have. Better textures, Lynn I think has a bunch of breed morphs and even some hi res textures for it. Just to get the old nag a bit more umph!
btw some people call them feathers but officially they are called fetlocks hair.
Quote - I bought the horse and the pose pac but havent recieved a link yet for the free one. I just emial their cust serv if they forget.
Nope, no one forgot - the free poses are not quite ready to go out, but will be given to everyone who purchased the required items :). > Quote - Is the horse a complete unit out of the box or do you need to get additional breed morphs and other stuff we need to get to fill out anything we usully get from DAZ.
The Horse is a complete unit out of the box, but there will be more breeds, textures, characters, and many other items coming down the road. While it would be nice to have everything immediately, that's not possible in real life - people creating, testing, approving products have only so many hours in a day and more than one thing to handle - patience, grasshopper ;)
Quote - Will it work in Poser 7 or is it set up to only work in newer versions of Poser and/or D/S?
Because of the technology used, the Horse requires Poser 9+ and/or DS 4.6.
Hope this helps!
Cheers,
Alisa
RETIRED HiveWire 3D QAV Director
Quote - I bought the horse and the pose pac but havent recieved a link yet for the free one. I just emial their cust serv if they forget.
Sorry, should have been a bit more specific when I said they're not quite ready to go out - it says on the product page for the free poses "The freebie will be placed into all qualifying accounts on May 28, 2014"
Cheers,
Alisa
RETIRED HiveWire 3D QAV Director
tail 1-9 is what I have. what else did you need with it?
wait. I looked at it more closely and checked the Hivewire horse page. There does seem to be a bunch of morphs they advertise that don't show up on the tail or the hair figure for the tail. Not sure maybe they will update that.
W10, Ryzen 5 1600x, 16Gb,RTX2060Super+GTX980, PP11, 11.3.740
This site uses cookies to deliver the best experience. Our own cookies make user accounts and other features possible. Third-party cookies are used to display relevant ads and to analyze how Renderosity is used. By using our site, you acknowledge that you have read and understood our Terms of Service, including our Cookie Policy and our Privacy Policy.
How does it compare to the Daz Milenium horse, charger and daz horse 2?
W10, Ryzen 5 1600x, 16Gb,RTX2060Super+GTX980, PP11, 11.3.740